Introduction
Welcome to the HITWAY H6 Folding Electric Scooter user manual. This document provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric scooter. The HITWAY H6 is an app-controlled e-scooter featuring a 48V 15.6Ah battery and 8.5-inch wheels, designed for efficient and enjoyable urban commuting.
Important Safety Guidelines
Before operating your HITWAY H6 electric scooter, please read and understand all safety instructions. Failure to follow these instructions may result in serious injury or property damage.
- Always wear a helmet and appropriate safety gear (knee pads, elbow pads) when riding.
- Do not ride in wet conditions, heavy rain, or through puddles deeper than 1 inch.
- Ensure all bolts and quick releases are securely fastened before each ride.
- Familiarize yourself with local laws and regulations regarding electric scooter usage.
- Maintain a safe speed and distance from other vehicles and pedestrians.
- Avoid riding on uneven surfaces, steep inclines, or over obstacles that could cause loss of control.
- Do not allow children under the age of 16 to operate the scooter.
- Maximum load capacity is 120 kg. Do not exceed this limit.
- Always use both the disc brake and electronic brake for effective stopping.
Package Contents
Please check the box for the following items:
- HITWAY H6 Folding Electric Scooter
- Power Adapter/Charger (European plug)
- User Manual
- Necessary tools for assembly (if applicable)
Assembly and Initial Setup
1. Unfolding the Scooter
Carefully remove the scooter from its packaging. Locate the folding mechanism, typically near the base of the steering column. Release the latch and lift the steering column until it locks into place. Ensure it is securely locked before proceeding.
Image: The HITWAY H6 Electric Scooter shown in both its unfolded and folded configurations, alongside a screenshot of its companion mobile application.
2. Handlebar Installation (if required)
If the handlebars are not pre-installed, attach them to the steering column. Ensure they are aligned correctly and all screws are tightened firmly.
3. Initial Charging
Before your first ride, fully charge the scooter's 48V 15.6Ah lithium battery. Connect the charger to the charging port on the scooter and then to a power outlet. The charging time is approximately 6-8 hours. The indicator light on the charger will change when charging is complete.
Image: Visual representation of the scooter's 48V 15.6Ah battery, highlighting its 6-8 hour charging time and up to 70KM maximum mileage.
4. App Connection
The HITWAY H6 is app-controlled. Download the official HITWAY app from your smartphone's app store. Follow the in-app instructions to pair your scooter via Bluetooth. The app allows you to monitor range, speed, battery consumption, control LED lights, and view cycling records.
Image: A mobile application interface displaying various functions for the HITWAY H6 scooter, including real-time data and control options.
Operating Your Scooter
1. Power On/Off
Press and hold the power button on the handlebar display to turn the scooter on or off. The display will show current speed, battery level, and other relevant information.
2. Riding the Scooter
- Starting: Place one foot on the deck and push off with the other foot. Once you gain a little momentum, gently press the accelerator lever.
- Speed Modes: The scooter features 3 speed modes. Use the controls on the handlebar or the app to switch between modes according to your preference and riding conditions. The maximum speed is 25 KM/H.
- Braking: To slow down or stop, use the brake levers on the handlebars. The scooter is equipped with both disc and electronic braking systems for efficient and safe stopping.
- Lighting: The scooter features LED headlights for illuminating the road and tail lights with turn signals to enhance visibility and safety. Activate them via the handlebar controls or the app.
Image: Details of the scooter's LED headlight and rear lighting system, including turn signals, designed for improved visibility.
3. Shock Absorption
The HITWAY H6 is designed with a powerful rocker arm shock absorption system to reduce bumps and provide a smoother ride, especially on varied terrain.
Image: An illustration demonstrating the scooter's rocker arm shock absorption feature, designed for comfort and stability.
4. Motor Performance
The scooter is powered by a 500W permanent magnet brushless motor, offering strong performance and a maximum climbing limit of ≤15°.
Image: A detailed view of the scooter's 500W motor, showcasing its power and capability for speeds up to 25KM/H and inclines of 15 degrees.
5. Product Demonstration Video
Video: A demonstration of the HITWAY H6 Electric Scooter in use, highlighting its features and performance.
Maintenance
- Cleaning: Wipe the scooter with a damp cloth. Do not use high-pressure water or immerse the scooter in water.
- Tires: Regularly check the tire pressure of the 10-inch explosion-proof tubeless tires. Maintain recommended pressure for optimal performance and safety.
- Battery Care: Charge the battery regularly, even if the scooter is not in use, to prolong its lifespan. Avoid completely draining the battery. Store the scooter in a cool, dry place.
- Brakes: Periodically inspect the disc brakes and electronic brakes for wear and tear. Adjust or replace components as needed.
- General Inspection: Regularly check all screws, bolts, and moving parts for tightness and proper function.
Troubleshooting
If you encounter issues with your HITWAY H6 scooter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter does not power on | Low battery; Loose connections | Charge the battery; Check all cable connections. |
| Reduced range or power | Underinflated tires; Battery degradation; Overload | Check and inflate tires; Ensure battery is fully charged; Do not exceed max load. |
| Brakes not effective | Brake pads worn; Cable tension incorrect | Inspect and replace brake pads; Adjust brake cable tension. |
| App connection issues | Bluetooth off; App not updated; Scooter not discoverable | Ensure Bluetooth is on; Update app; Restart scooter and app. |
| Unusual noises during operation | Loose components; Debris in wheels | Inspect and tighten all fasteners; Clean wheels and brakes. |
For more complex issues, please contact customer support.
Technical Specifications
| Feature | Specification |
|---|---|
| Brand Name | HITWAY |
| Model Number | H6 |
| Gears | 3 Speed Modes |
| Mileage (Range Per Charge) | 60-70km |
| Frame Material | Aluminium |
| Wheel Size | 10" |
| Max Speed | 25KM/H |
| Battery Voltage & Capacity | 48V 15.8Ah Lithium Battery |
| Motor Rated Power | 500 W |
| Charging Time | 6-8h |
| Tire Width | 10" |
| Tire Style | Explosion-proof tubeless tire |
| Maximum Load | 120KG |
| Motor Type | Permanent Magnet Brushless Motor |
| Expanded Size | 116*61*124cm |
| Foldable Size | 107.5*20*43cm |
| Net/Gross Weight | 23KG/26.5KG |
| Max Climbing Limit | ≤15° |
| Waterproof Grade | IP54 |
| Smart Phone APP | YES (Control Method: APP Control) |
| Braking System | Disc brake + Electronic brake |
| Material | ABS |
| Plug Type | European plug |
| Features | Foldable, Eco-Friendly, Portable, Lightweight |
User Tips
- For optimal battery life, avoid storing the scooter in extreme temperatures.
- Regularly check tire pressure to ensure maximum range and a comfortable ride.
- Utilize the app's cycling records feature to track your rides and monitor performance over time.
- When folding the scooter, ensure the mechanism is fully engaged to prevent accidental unfolding during transport.
Warranty and Support
The HITWAY H6 Electric Scooter comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, spare parts, or any inquiries not covered in this manual, please contact the seller or HITWAY customer service directly.