Introduction
Thank you for choosing the CAIXI 11.3 Inch 4K DVR Dash Cam. This device is designed to enhance your driving experience with advanced features such as 4K video recording, wireless CarPlay, Android Auto, GPS navigation, and a large touch screen display. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and safety.

Figure 1: 11.3 Inch 4K DVR Dash Cam with Wireless CarPlay and Android Auto interface.
Package Contents
Please check the package for the following items:
- 11.3 Inch Car DVR Unit
- Long Bracket
- Car Charger
- Rear Camera (optional, 6m/10m cable)
- Adhesive Mount
- GPS Module (optional)
- User Manual
- AUX Cable

Figure 2: Included accessories: Long Bracket, Car Charger, Rear Camera (optional), Adhesive Mount, GPS (optional), User Manual.
Setup
1. Mounting the Device
The DVR can be installed on your car's front windshield or center console.
- Front Windshield Installation: Attach the long bracket to the front windshield using the adhesive suction cup.
- Center Console Installation: Adsorb the bracket on the center console via the adhesive suction cup. If the surface is not smooth, you can use screws to lock the mounting pad for improved stability.

Figure 3: The adjustable bracket allows for 360-degree screen adjustment to avoid blocking your view.
2. Power Connection
Connect the car charger to your vehicle's cigarette lighter socket and the other end to the DC 12V power socket on the left side of the DVR. Ensure the indicator light on the USB charger illuminates to confirm power supply.

Figure 4: Side view of the DVR showing ports for Audio output, Reversing camera input, U disk reading, TF card slot, and Power socket.
3. Memory Card Installation and Formatting
The DVR supports 32G/64G/128G/256G memory cards. For optimal performance with 4K high-definition recording, use high-quality U3 grade C10 high-speed brand memory cards.
- Insert the memory card into the TF card slot on the DVR.
- Upon first installation, it is crucial to format the memory card directly on the DVR.
- Formatting Steps: Enter the DVR menu, navigate to the 'Format' option, and confirm to format the memory card.
Important: Formatting the memory card on a computer is an incorrect operation and may lead to improper functioning. Always format the card using the DVR's menu option.
4. Rear Camera Connection (Optional)
If your kit includes a rearview camera and you wish to use the reversing assist function, connect the red signal wire of the rearview camera to your car's reversing light (the light that illuminates when reversing). If the reversing assist function is not desired, the red signal wire can be left unconnected.

Figure 5: The rear view system automatically displays parking lines when reversing.
5. GPS Module Installation (Optional)
To enable GPS tracking:
- Connect the GPS module to the DVR.
- Enable the GPS function in the DVR's menu settings.
- Install the DVR in your car and start recording. Drive outdoors for a short distance; the GPS module will automatically acquire satellite signals and record video with GPS driving track information.
Operating Instructions
1. Wireless CarPlay / Android Auto
The DVR supports wireless CarPlay for iPhones and wireless Android Auto for Android phones.
- For iPhone (CarPlay): Pair your iPhone with the DVR via Bluetooth, then connect to the DVR's Wi-Fi signal. CarPlay will automatically launch.
- For Android Phone (Android Auto): Ensure you have the Android Auto app installed from the Google Play Store. Pair your Android phone with the DVR via Bluetooth, then connect to the DVR's Wi-Fi signal. Android Auto will automatically launch.

Figure 6: Visual guide for connecting Wireless CarPlay and wired Android Auto.
2. Wired CarPlay / Android Auto
You can also connect your phone via a data cable. Use the original data cable that supports data transmission for a stable connection.
3. AirPlay / Miracast (Wireless Mirroring)
The device supports AirPlay for iPhones and Miracast for Android phones for wireless screen mirroring.
- Go to 'Settings' on the DVR, then 'Phone Link'.
- Select 'iOS Device (iOS Mirror)' for AirPlay or 'Wireless Connection' for Miracast.
- After completing the setting, restart the car radio to use the mirroring function normally.

Figure 7: Wireless mirroring for iOS (AirPlay) and Android (Miracast) devices.
4. Bluetooth 5.1
The built-in Bluetooth 5.1 module allows for hands-free calling and Bluetooth music streaming, enhancing driving safety.

Figure 8: Bluetooth 5.1 interface for music playback and hands-free phone calls.
5. Audio Output (FM/AUX)
You can transmit audio from the DVR to your car's speakers via FM transmission or an AUX cable.
- FM Transmission: Turn on the FM TRANSMITTER on the device. Adjust your car radio to a blank station, then set the DVR's FM frequency to match your car radio's frequency.
- AUX Cable: Connect one end of the provided AUX cable to the AUDIO port on the DVR and the other end to the AUX-IN port on your car. Select AUX playback on your car radio.

Figure 9: Illustration of FM and AUX signal transmission for audio output.
6. Voice Assistant (Siri/Google Assistant)
The device supports Siri and Google Assistant for voice commands, allowing you to control navigation, music, and calls hands-free.

Figure 10: Examples of voice commands for Siri and Google Assistant.
7. Driving Habit Selection
The device supports switching between left-driving and right-driving habits for display orientation.

Figure 11: Display adjustment for left-hand or right-hand drive vehicles.
Maintenance
1. Memory Card Care
Regularly format your memory card through the DVR's menu to ensure optimal recording performance and prevent data corruption. Replace the memory card if you experience frequent errors or recording issues.
2. Cleaning
Use a soft, dry cloth to clean the screen and exterior of the DVR. Avoid using abrasive cleaners or solvents that could damage the device.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from the device | AUX cable not inserted, FM transmitter switch off, or incorrect FM frequency. | Ensure AUX cable is connected or FM transmitter is ON and frequencies match. |
| Screen not lighting up | Improper power connection, device freeze. | Check power supply connection (cigarette lighter and DC 12V port). If still off, press and hold the reset button on the back for 3 seconds. If issue persists, contact customer service for software upgrade. |
| Touch buttons not working after upgrade | Incomplete software upgrade process. | The upgrade process requires two steps. An incomplete upgrade may cause this. Contact customer service for the correct upgrade video and software. |
| Screen blurry or unclear with sunglasses | VCOM parameters need adjustment. | Adjust the VCOM parameters in the settings. Contact customer service for video instructions if needed. |
| Cannot use original/other brand rear camera | Compatibility issues. | Only Grandnavi brand rear cameras are supported for this device. |
Specifications
| Feature | Detail |
|---|---|
| Display Size | 11.3 inches |
| Display Type | OLED, Touch Screen |
| Screen Ratio | 16:9 |
| Camera Resolution | 1280x960 (Front: 4K UHD 3840*2160P, Rear: AHD 1080P) |
| Number of Lenses | 1 (supports dual lens with optional rear camera) |
| Imaging Sensor | Sony IMX327 |
| Video Code | H.264 |
| Video Format | AVI, MOV, MPEG-4, TS, MP4 |
| Frames Per Second | 60 |
| Max External Memory | 128G (supports up to 256G as per description) |
| Memory Card Required Speed | Class 10 (U3 grade recommended for 4K) |
| Power Source | Corded Electric (DC 12V) |
| Chipset Manufacturer | Allwinner (12NM processor) |
| Assembly Mode | After The Loading Machine Integrated |
| Special Features | G-Sensor, Display Rotate, Digital zoom, With Rearview Mirror, Built-in GPS (optional), Radar Detector, Loop-Cycle Recording, NightShot Function, Audio Recorded |
| APP Compatibility | Yes (Viidure app for Wi-Fi connection) |
| OSD Language | Albanian, Arabic, Armenian, Azeri, Belarusian, Bulgarian, Catalan, Chinese (Simplified/Traditional), Croatian, Czech, Danish, Dutch, English, Estonian, Filipino, Finnish, French, Galician, Georgian, German, Greek, Haitian Creole, Hebrew, Hindi, Hungarian, Icelandic, Indonesian, Irish, Italian, Japanese, Korean, Latin, Latvian, Lithuanian, Macedonian, Malay, Maltese, Norwegian, Persian, Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swahili, Swedish, Thai, Turkish, Ukrainian, Urdu India, Vietnamese, Welsh, Yiddish |
| Certifications | CE, RoHS, FC |
| Weight | 0.81 kg (approx.) |
| Dimensions (Unit) | Approx. 26.1cm (Length) x 10.6cm (Height) |
| Package Dimensions | 29cm (L) x 15cm (W) x 11cm (H) |

Figure 12: Key features including dual dash cam recording, wide-angle view, 24H parking monitor, G-sensor, and loop recording.
User Tips
- Always format your new memory card directly on the DVR before first use to ensure proper functionality.
- If you experience any issues with the screen or touch functions after a software update, ensure the update process was completed in all required steps. Contact support if problems persist.
- For 24-hour parking monitoring, consider purchasing a Buck Line accessory to connect the DVR directly to your car's power source, allowing it to record even when the car is off. Professional installation is recommended for Buck Line.
- When connecting to CarPlay or Android Auto, ensure both Bluetooth and Wi-Fi are enabled on your phone and correctly paired with the DVR.
- If using the GPS function, ensure the GPS module is connected and the function is enabled in the DVR settings. For track playback, use the 'Hit GPS Player' software on a computer. Download link: https://pcgps.ce2ce.com/hit/hitplayer.html
Warranty and Support
This product comes with a 1-year warranty. For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase.