Aramox H8-2T

Contents

Aramox H8-2T Wireless Intercom System User Manual

Model: H8-2T

1. Introduction

The Aramox H8-2T Wireless Intercom System is designed for convenient two-way voice communication within homes, offices, or for elderly care. This system offers ultra-long-distance communication without the need for network or complex wiring, providing a simple and effective solution for real-time voice calls.

Key Features:

  • Ultra-long range communication (up to 300 meters, penetrating walls and floors).
  • Slim and stylish design (18mm thickness).
  • User-friendly features including talk light and battery light display.
  • High capacity 1800mAh polymer battery for extended use.
  • Two frequency options (462MHz and 434MHz) to avoid interference.
  • 38 ringtone options and 3 adjustable volume levels.

2. Package Contents

Please check the package for the following items:

  • 2 x Indoor Intercom Units
  • 2 x Charging Docks
  • 1 x Charging Station Charging Cable
  • 1 x Host Charging Cable
  • 1 x Instruction Manual

Two white Aramox H8-2T wireless intercom units on charging docks
Image: Two white Aramox H8-2T wireless intercom units on charging docks.

3. Setup

3.1 Initial Charging

  1. Place each intercom unit into its respective charging dock.
  2. Connect the charging cables to the charging docks and a suitable power source (DC5V/1A).
  3. Allow approximately 5 hours for a full charge. The battery light display on the unit will indicate charging status.

3.2 Power On/Off

The units are designed to be powered on when placed in the charging dock and ready for use. Ensure both units are charged before operation.

3.3 Placement

Position the intercom units in desired locations within your home or office. For optimal performance, avoid placing them near large metal objects or other electronic devices that might cause interference.

Two white intercom units on a counter, with a person in the background, illustrating home care use
Image: Two white intercom units on a counter, illustrating home care use without network or wiring.

4. Operating Instructions

4.1 Making a Call

  1. To initiate a call, click the dedicated call button on your intercom unit.
  2. The other intercom unit will ring, indicating an incoming call.
  3. To speak, hold down the 'TALK' button. Release the 'TALK' button to stop speaking and listen for a response.

Diagram showing two intercom units and the call process: click call button, other unit rings, hold talk button to speak, release to stop
Image: Diagram illustrating the call process: click call button, other unit rings, hold talk button to speak, release to stop.

4.2 Adjusting Volume

The intercom system features 3 adjustable volume levels for both ringtones and call volume. Use the volume adjustment key (often integrated with the standby machine volume adjustment) to set your preferred sound level.

4.3 Selecting Ringtones

Choose from 38 available ringtone options. Refer to the unit's controls for ringtone selection, typically a dedicated button or a combination of buttons.

4.4 Frequency Options

The system offers two frequency options: 462MHz (B-gear) and 434MHz (A-gear). If you experience interference, try switching the operating frequency on both units to the alternative option. Ensure both units are set to the same frequency for communication.

5. Maintenance

5.1 Battery Care

The intercom units are powered by an 1800mAh polymer battery. With normal use (approximately 5 calls per day, 30 seconds per call), the battery can last for about one week. The standby time is 3-5 days. Recharge the units when the battery indicator light suggests low power.

5.2 Cleaning

Wipe the intercom units and charging docks with a soft, dry cloth. Do not use abrasive cleaners or immerse the units in water.

6. Troubleshooting

  • No Communication: Ensure both intercom units are powered on and fully charged. Verify that both units are set to the same operating frequency (462MHz or 434MHz). Remember, the two devices must be used together and cannot be used alone.
  • Interference/Poor Sound Quality: Try switching both units to the alternative frequency option (e.g., if on 462MHz, switch both to 434MHz). Ensure there are no major obstructions or strong electromagnetic fields between the units.
  • Unit Not Charging: Check that the charging cables are securely connected to both the charging dock and the power source. Ensure the intercom unit is correctly seated in the charging dock.
  • No Sound During Call: Check the call volume settings on both units. Ensure the 'TALK' button is being held down when speaking and released when listening.

7. Specifications

SpecificationDetail
Model NumberH8-2T
Doorbell TypeWireless
Power Supply MethodPolymer battery 1800mAh
Battery PoweredDC5V/1A
Working Temperature-20 °C to 55 °C
Transmit Distance (Open Space)Approximately 1000 meters
Transmit Distance (Partition Walls)20-50 meters, Floors 1-8
Working FrequencyB-gear: 462MHz, A-gear: 434MHz
Working Time (Normal Use)Approx. 1 week (5 calls/day, 30s/call)
Charging TimeApprox. 5 hours for full charge
Standby Time3-5 days
Sound Adjustment3 levels
Music Ringtones38 options
Product Size11.6 x 5.6 x 1.8 cm (4.6 x 2.2 x 0.7 inches)
Charging Dock Size7 x 5.6 x 2.9 cm (2.8 x 2.2 x 1.1 inches)

8. User Tips

  • For optimal battery life, fully charge the units before first use and avoid letting them completely drain frequently.
  • If using in a multi-story building, test the signal strength in different areas to find the best placement for clear communication.
  • Keep the units away from water and direct sunlight to ensure longevity.
  • Consider using the intercom for quick check-ins with elderly family members or children, leveraging its simplicity and ease of use.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the manufacturer or your point of purchase. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.