OriPure PHZ5

Contents

OriPure PHZ5 Electric Guitar Humbucker Pickup User Manual

Model: PHZ5 | Brand: OriPure

1. Safety Information

Please read all safety information before installation and use to prevent damage and ensure proper operation.

  • This product is designed for use with electric guitars and basses.
  • Installation requires basic knowledge of guitar electronics and soldering.
  • Improper installation may cause damage to the guitar or electronic components.
  • If you are not familiar with guitar wiring or soldering, professional installation is recommended.
  • Keep small parts away from children to avoid choking hazards.
  • Do not expose the product to moisture, water, or extreme heat.
  • This product is not a toy and is intended for musical instrument use only.
  • This product complies with general consumer product safety requirements when used as intended.

2. Introduction

The OriPure PHZ5 series offers a selection of high-quality handcrafted double coil humbucker pickups, designed for electric guitar enthusiasts. These pickups enhance your instrument's sound and are available in various configurations (neck, bridge, or high output bridge, as well as sets) to cater to diverse tonal needs.

Front view of the OriPure PHZ5 humbucker pickup, showing the two coils and adjustable pole pieces.
Figure 1: OriPure PHZ5 Humbucker Pickup (Front View)

3. Key Features

  • Craftsmanship: Each pickup is meticulously handcrafted to ensure superior quality and performance.
  • Magnet Type: Utilizes Alnico 5 magnets for a clear, bright tone with rich harmonic content.
  • Wiring Options: All pickups come with a 4-conductor cable for versatile wiring configurations, allowing for various tonal options, including single-coil mode.
  • Wax Potted: Vacuum wax potted to minimize noise and provide squeal-free operation.
  • Tone Characteristics: Delivers a bright, sharp, transparent, warm, and crisp sound, suitable for blues and jazz.
  • Pole Pieces: Features 6 non-adjustable slug pole pieces and 6 adjustable screw pole pieces for tailored sound.
  • Base Plate: Copper-nickel alloy baseplate for enhanced conductivity.

4. Specifications

Attribute Value
Model Number PHZ5 (M00744-2)
Type Humbucker Pickup (Bridge)
Magnet Alnico 5
Pole Pieces 6 Non-Adjustable Slug & 6 Adjustable Screw
Pole Spacing (Bridge) 52mm
Resistance (High Output Bridge) Approx. 16K ohms
Peak Frequency Approx. 8.6H
Output 4 Wires
Base Plate Copper-nickel alloy
Material Metal, Plastic
Color Black (also available in White, Zebra)
Approx. Product Dimensions (L x W x H) 84.0mm x 37.6mm x 14.0mm
Approx. Package Weight 0.2 kg

Note: All parameters are for reference only; actual performance may vary based on the guitar and related equipment. DC Resistance values may fluctuate due to ambient temperature, with a potential change range of up to 500Ω in extreme conditions.

Technical diagram illustrating the dimensions of the OriPure PHZ5 humbucker pickup in millimeters and inches.
Figure 2: OriPure PHZ5 Humbucker Pickup Dimensions

5. Setup and Installation

Installing the OriPure PHZ5 humbucker pickup requires basic knowledge of guitar electronics and soldering. If you are unfamiliar with these procedures, professional installation is highly recommended to avoid damage to your instrument or the pickup.

5.1. Package Contents

Each pickup set includes the following hardware for installation:

  • 1 x OriPure PHZ5 Humbucker Pickup (Bridge)
  • 2 x Mounting Screws
  • 2 x Springs
OriPure PHZ5 humbucker pickup with included mounting screws and springs.
Figure 3: Pickup with Included Hardware

5.2. Wiring Instructions

The PHZ5 pickup features a 4-conductor design, allowing for versatile wiring configurations, including switching to single-coil mode for a more diverse tonal experience. This design enables seamless switching between classic humbucker and single-coil tones.

Detailed wiring instructions for the 4-conductor humbucker pickup, showing connections for ground, main line, and single-cutting lines.
Figure 4: Wiring Diagram
  • Black and Silver Wire: This is the ground wire. Connect it to the volume potentiometer shell.
  • Green Line: This is the main line. Connect it to the gear switch.
  • Red and White Wires: These are single-cutting lines. Connect them to the single-cutting switch. If you do not need the single-cutting function, you can wrap these wires with insulating tape.

For detailed wiring diagrams specific to your guitar model or desired configuration, consult a qualified guitar technician or refer to online resources.

6. Operating Your Pickup

Once installed, the OriPure PHZ5 pickup will deliver its characteristic bright, sharp, transparent, warm, and crisp sound. Experiment with your guitar's tone and volume controls, as well as amplifier settings, to explore the full range of tonal possibilities.

6.1. Tonal Versatility

The 4-conductor wiring allows for advanced tonal shaping. By utilizing a single-cutting switch (coil-split), you can switch between the full humbucker sound and a brighter, lower-output single-coil tone. This versatility makes the PHZ5 suitable for various music styles, from blues and jazz to rock and more.

6.2. Pole Piece Adjustment

The adjustable screw pole pieces can be raised or lowered to fine-tune the balance of string volume. Adjust them slightly with a small screwdriver to achieve your preferred string-to-string balance and attack.

7. Maintenance

  • Cleaning: Gently wipe the pickup cover with a soft, dry cloth to remove dust and grime. Avoid using abrasive cleaners or solvents.
  • Protection: Protect the pickup from physical impact and extreme environmental conditions (moisture, excessive heat/cold).
  • Inspection: Periodically check the wiring connections for any signs of wear or looseness.

8. Troubleshooting

  • No Sound/Weak Output:
    • Check all wiring connections for proper soldering and continuity.
    • Ensure the pickup is correctly installed and making good contact with the guitar's circuit.
    • Verify that your guitar's volume and tone pots are functioning correctly.
  • Excessive Noise/Hum:
    • Confirm that the ground wire is securely connected.
    • Ensure the pickup is properly wax potted (which it is from factory) to prevent microphonics.
    • Check for external interference from power sources or other electronic devices.
  • Unbalanced String Volume:
    • Adjust the individual screw pole pieces to balance the output of each string.
    • Check the pickup height relative to the strings; adjust as needed.

9. User Tips

  • The OriPure PHZ5 is noted for producing a clear upper-mid range sound with minimal buzzing, making it excellent for articulate playing.
  • Users have praised its well-rounded sound, offering deep bass and clear treble, providing a balanced tonal profile.
  • Experiment with different amplifier settings and pedal combinations to fully explore the pickup's versatile tonal characteristics.

10. Frequently Asked Questions (FAQ)

Q: Is this pickup available in white?
A: Yes, the OriPure PHZ5 series is available in Black, White, and Zebra color options.
Q: Is the pickup wax potted to prevent microphonics?
A: Yes, the pickup is vacuum wax potted to minimize noise and provide squeal-free operation, effectively preventing microphonics.

11. Warranty and Support

For warranty information, technical support, or further assistance, please refer to the official product documentation or contact the seller directly. A detailed user manual in PDF format is available for download: OriPure PHZ5 User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.