1. Product Introduction
Thank you for choosing the Retekess TD163 guest paging system. This system consists of a keyboard transmitter and multiple coaster pagers, designed to enhance efficiency and customer satisfaction in various service environments.
The TD163 system is widely used in fast food restaurants, coffee houses, pizza shops, 4S stores, churches, and other establishments where guests wait for service. It helps reduce labor costs and improves overall operational flow.
How the Coaster Paging System Works:
- Order Placement: Guests place an order and receive a coaster pager from the staff. Each pager has a unique ID (No. 1-998).
- Order Ready Notification: When the order is ready, the staff enters the pager's ID number on the transmitter. The corresponding pager will then vibrate, beep, or flash to notify the customer to pick up their order.

2. Product Overview
The TD163 system features a space-saving design with dual charging bases, allowing for efficient charging of multiple pagers simultaneously. The system is designed for durability and ease of use.


Video: Demonstrating the Retekess TD163 Wireless Restaurant Calling System in use.
3. Specifications
| Feature | Description |
|---|---|
| Operating Voltage | DC 3.7V (Rechargeable battery) |
| Prompt Mode | Vibration/Buzzer/Flashing |
| Standby current | <9mA |
| Standby time | ≈20 Hour |
| Receiving sensitivity | -110dBm |
| Battery capacity | 300mAh |
| Material | ABS |
| Size | Φ80*12mm |
| Feature | Description |
|---|---|
| Power input | DC12V/2A |
| Weight | 196g/6.91oz |
| Size | 270*90*25mm |
| Max Capacity | 998 pagers |
| Keypress Method | Touch type |
| Material | ABS |

4. Initial Setup
Power On
- Connect the power supply to the keyboard transmitter. The display will light up.
- Place the pagers onto the charging slots and connect the power source to the charging bases.
- During charging, the indicator light on the pager will be continuously on. In standby mode, the indicator light flashes.
- If a pager has a low battery, "Lo" will be displayed on its digital tube.
- Pagers can be powered on by placing them back into the charging slot while the keypad transmitter is connected to power.


5. Operating Instructions
Power Off
To turn off all pagers in the charging slots, press "999" on the keypad and then the CALL button. All pagers in the charging slots will enter charging mode (no number displayed on the digital tube). Then, disconnect the power source.
Important: Do not leave pagers charging or in standby mode for extended periods when not in use, as this can reduce battery performance.
Call Pager
Ensure the pager is in standby mode. Input the corresponding ID number using the keypad, then press the CALL button. The pager will beep, vibrate, or flash according to its set prompt mode. The pager will stop its alert once it is returned to the charging slot.

Settings
To enter the setting mode, press the "Call" and "Delete" buttons simultaneously. "F1" will appear on the display. Use the keypad to navigate through different settings.

- Keypad ID Setting (F1):
- Enter setting mode (Call + Delete, "F1" displayed).
- Press "Call" to enter sub-menu ("0" displayed).
- Enter the desired ID number (1-999) via the Keypad.
- Press "Call" to confirm. The display will return to "F1". - Paring Pager ID Setting (F2):
- Enter setting mode (Call + Delete, "F1" displayed).
- Enter "2" via the Keypad ("F2" displayed).
- Press "Call" to enter sub-menu ("0" displayed).
- Enter the desired ID number (1-998) via the Keypad.
- Remove the pager from the charging slot and press "Call" within 5 seconds. The pager will flash and beep, indicating successful setting. The display will return to "F2". - Prompt Time Setting (F3):
- Enter setting mode (Call + Delete, "F1" displayed).
- Enter "3" via the Keypad ("F3" displayed).
- Press "Call" to enter sub-menu ("0" displayed).
- Enter the desired reminder duration (0-250 seconds). If set to 0s, the pager will not stop automatically until returned to the charging slot.
- Remove the pagers from charging slots and press "Call" within 5 seconds. The pagers will flash and beep, indicating successful setting. The display will return to "F3". - Beep Prompt Speed Setting (F4):
- Enter setting mode (Call + Delete, "F1" displayed).
- Enter "4" via the Keypad ("F4" displayed).
- Press "Call" to enter sub-menu ("0" displayed).
- Enter the desired value: 0 (turn off beep), 1 (slow mode), 2 (medium speed), 3 (fast mode).
- Remove the pagers from charging slots and press "Call" within 5 seconds. The pagers will flash and beep, indicating successful setting. The display will return to "F4". - Vibration Prompt Setting (F5):
- Enter setting mode (Call + Delete, "F1" displayed).
- Enter "5" via the Keypad ("F5" displayed).
- Press "Call" to enter sub-menu ("0" displayed).
- Enter the desired value: 0 (turn off vibration), other values (turn on vibration mode).
- Remove the pagers from charging slots and press "Call" within 5 seconds. The pagers will flash and beep, indicating successful setting. The display will return to "F5". - Flash Prompt Speed Setting (F6):
- Enter setting mode (Call + Delete, "F1" displayed).
- Enter "6" via the Keypad ("F6" displayed).
- Press "Call" to enter sub-menu ("0" displayed).
- Enter the desired value: 0 (turn off flash), 1 (slow mode), 2 (fast mode), 3 (breathing light mode).
- Remove the pagers from charging slots and press "Call" within 5 seconds. The pagers will flash and beep, indicating successful setting. The display will return to "F6".
After all settings are completed, press the "Delete" button to return to the Call state.


6. Maintenance
Cleaning
The TD163 Wireless Restaurant Calling System has an IP33 waterproof rating, making it resistant to dust and water splashes. The touch-sensitive keypad is designed for easy and hygienic cleaning.

Battery Care
To prolong battery life, avoid leaving pagers on charging slots or in standby mode for excessively long periods when not in active use. The pagers use a 602030 Lithium Battery with a capacity of 300mAh.
7. Troubleshooting
- Pager displays "Lo": This indicates a low battery. Place the pager back on the charging slot to recharge.
- Pager not responding: Ensure the pager is within the operating range of the transmitter. The system has a range of up to 500m in open areas, but indoor range is typically 100m and can be affected by obstacles.
- Pager not charging: Verify that the charging base is properly connected to power and that the pager is correctly seated in the charging slot.
- Pager not pairing: Follow the Paring Pager ID Setting (F2) instructions carefully, ensuring the pager is removed from the charging slot and the "Call" button is pressed within 5 seconds.
8. User Tips
- Adjustable Alerts: The pager's vibration is strong, and the beeping sound is clear. Both can be adjusted to suit the noise level and environment of your establishment.
- Battery Life: Pagers offer approximately 7-8 hours of working time and about 20 hours of standby time. Ensure regular charging to maintain optimal performance.
- Range Considerations: The system boasts a significant range (up to 500m in open areas, 100m indoors). However, dense walls or other electronic interference can reduce this range. Position the transmitter centrally for best coverage.
- No Boundary Alert: Please note that the TD163 system does not include a boundary alert function for pagers leaving the service area.
- Customization: The pager stickers are 48mm x 48mm, allowing for custom branding or messaging.


9. Safety Information and Precautions
ATTENTION! Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.
This radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications. RF energy, when used improperly, can cause biological damage. All Retekess radios are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. Manufacturers also recommend specific operating instructions to users of the radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it.
RF Energy Exposure
- DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the antenna gain shall not exceed the specified gain by the manufacturer declared.
- DO NOT transmit for more than 50% of total radio use time; more than 50% of the time can cause RF exposure compliance requirements to be exceeded.
- During transmissions, your radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so.
- The device complies with RF specifications when the device is used at 5mm from your body. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.
- DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.
Local Government Regulations
When radios are used as a consequence of employment, the Local Government Regulations require users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retekess radio has an RF Exposure Product Label. Also, your Retekess user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.
Radio License (if appropriate)
Governments keep the radios in classification, business radios operate on radio frequencies that are regulated by the local radio management departments (FCC, ISED, OFCOM, ANFR, BFTK, Bundesnetzagentur...). To transmit on these frequencies, you are required to have a license issued by them. For detailed classification and the use of your radios, please contact the local government radio management departments. Use of this radio outside the country where it was intended to be distributed is subject to government regulations and may be prohibited.
Unauthorized Modification and Adjustment
Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority granted by the local government radio management departments to operate this radio and should not be made. To comply with the corresponding requirements, transmitter adjustments should be made only by or under the supervision of a person certified as technically qualified to perform transmitter maintenance and repairs in the private land mobile and fixed services as certified by an organization representative of the user of those services. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the local government radio management departments equipment authorization for this radio could violate the rules.
FCC Requirements
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
CE Requirements
- Henan Eshow Electronic Commerce Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at www.retekess.com.
- Disposal: The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.
IC Requirements
- This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
- Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage; (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Safety Operation
- Avoid Choking Hazard: Small Parts. Not for children under 3 years.
- Protect your hearing: Use the lowest volume necessary to do your job. Turn up the volume only if you are in noisy surroundings. Turn down the volume before adding headset or earpiece. Limit the amount of time you use headsets or earpieces at high volume. When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear. Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss. Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.
- Avoid Burns: Long transmission. When the transceiver is used for long transmissions, the radiator and chassis will become hot.
- Forbid: Do not use charger outdoors or in moist environments, use only in dry locations/conditions. Do not disassemble the charger, that may result in risk of electrical shock or fire. Do not operate the charger if it has been broken or damaged in any way. Do not place a portable radio in the area over an air bag or in the air bag deployment area. The radio may be propelled with great force and cause serious injury to occupants of the vehicle when the air bag inflates.
- To reduce risk: Pull by the plug rather than the cord when disconnecting the charger. Unplug the charger from the AC outlet before attempting any maintenance or cleaning. Contact Retekess for assistance regarding repairs and service. The adapter shall be installed near the equipment and shall be easily accessible. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Adapter shall be installed near the equipment and shall be easily accessible. The plug considered as disconnect device of adapter. The operating temperature of the EUT can't exceed the specified range.
Approved Accessories
This radio meets the RF exposure guidelines when used with the Retekess accessories supplied or designated for the product. Use of other accessories may not ensure compliance with the RF exposure guidelines and may violate regulations. For a list of Retekess-approved accessories for your radio model, visit www.retekess.com.
10. Warranty and Support
This guarantee card should be kept by the user; no replacement if lost. Most new products carry a two-year manufacturer's warranty from the date of purchase.
Warranty Service
To obtain warranty and after-sales service:
- Contact the seller from whom you purchased the product.
- Products may be repaired by our local repair center.
For warranty service, you will need to provide a receipt or proof of purchase from the actual seller for verification.
Exclusions from Warranty Coverage
The warranty does not cover:
- Any product damaged by accident.
- Damage resulting from misuse or abuse of the product, or from unauthorized alterations or repairs.
- If the serial number has been altered, defaced, or removed.
Contact Information
Manufacturer: Henan Eshow Electronic Commerce Co., Ltd
Address: 7/F, Sanjiang Building, No.170 Nanyang Road, Huiji District, Zhengzhou, Henan, China
Email: support@retekess.com
Web: www.retekess.com