Introduction
Thank you for choosing SucceBuy Workbench Caster Wheels. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new caster set. These industrial-grade casters are designed for effortless mobility and stability, featuring silent dual ball bearings, durable polyurethane wheels, and a convenient foot-operated brake system. Please read this manual thoroughly before use and retain it for future reference.
Safety Information
- Always ensure the casters are properly installed and securely fastened to the workbench or equipment before use.
- Do not exceed the maximum load capacity of 165 lbs (74.8 kg) per caster.
- Engage the foot-operated brake when the workbench needs to remain stationary to prevent accidental movement.
- Avoid moving the workbench over uneven surfaces or obstacles that could damage the wheels or cause instability.
- Wear appropriate personal protective equipment, such as the included gloves, during installation to prevent injury.
- Keep children and pets away from the workbench during movement or installation.
Package Contents
Verify that all items listed below are present in your package:
- 4 x Workbench Caster Wheels
- 1 x Pair of Gloves
- 4 x M10 Nuts
- 4 x Φ10 Washers
- 16 x ST5 Screws
- 1 x User Manual (this document)
Specifications
| Attribute | Value |
|---|---|
| Model Number | CC-CZJL-2.5 |
| Type | Workbench Caster Wheels / Furniture Caster |
| Certification | CE |
| Number of Wheels | 4 |
| Max Load Capacity (per caster) | 165 lbs / 74.8 kg |
| Product Size (L x W x H) | 6.29 x 2.75 x 6.85 in / 160 x 70 x 174 mm |
| Installation Height | 3.22 in / 82 mm |
| Features | Foot-Operated Brake, 360° Swivel, Dual Ball Bearings, Non-Slip Design |
| Wheel Material | High-Quality Polyurethane |
| Frame Material | Thickened Carbon Steel with Premium Electroplating |
Setup and Installation
The SucceBuy Workbench Caster Wheels feature an easy 6-hole side-mount design for quick installation.
- Prepare the Mounting Surface: Identify the desired mounting location on your workbench or equipment. Ensure the surface is flat, stable, and capable of supporting the casters and the load.
- Mark Drill Holes: Position the caster's mounting plate against the workbench leg. Use a pencil to mark the six screw holes. Ensure the caster is aligned correctly for optimal function. The installation height is 3.22 inches (82 mm).
- Drill Pilot Holes: Using an appropriate drill bit, drill pilot holes at the marked locations. The diagram suggests spacing of 4-3/4" and 2" between holes.
- Attach the Mounting Plate: Secure the caster's mounting plate to the workbench using the provided ST5 screws. Ensure all screws are tightened firmly.
- Install the Caster Wheel: Attach the caster wheel assembly to the mounting plate using the M10 nuts and Φ10 washers. Tighten securely with a wrench.
- Repeat for all Casters: Install all four caster wheels following the same steps.
Operating Instructions
Engaging and Disengaging the Brake
Your SucceBuy casters are equipped with a foot-operated brake for secure positioning.
- To Engage the Brake: Press down firmly on the non-slip brake pedal with your foot until it locks into place. This will lift the workbench approximately 3/4" (19 mm) off the ground, preventing movement.
- To Disengage the Brake: Gently lift the brake pedal with your foot. The workbench will lower, allowing the casters to roll freely.
Moving the Workbench
The 360-degree swivel design allows for easy and flexible movement in any direction.
- Ensure all brakes are disengaged before attempting to move the workbench.
- Apply gentle, even pressure to guide the workbench in the desired direction. The dual ball bearings ensure smooth and silent gliding.
- For precise positioning, utilize the 360° omnidirectional rotation capability to maneuver around obstacles or into tight spaces.
Maintenance
- Regular Cleaning: Keep the wheels and swivel mechanisms free from dust, debris, and obstructions. Use a damp cloth to wipe down the polyurethane wheels and metal components.
- Lubrication: Periodically apply a small amount of silicone-based lubricant to the swivel bearings and wheel axles to ensure smooth operation and prevent squeaking. Avoid excessive lubrication, which can attract dirt.
- Inspect Fasteners: Regularly check all screws, nuts, and washers to ensure they are tight. Re-tighten any loose fasteners to maintain stability and safety.
- Wheel Inspection: Examine the polyurethane wheels for any signs of wear, cracks, or damage. While designed to be floor-friendly and leave no marks, damaged wheels may compromise performance and floor protection.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Casters not rolling smoothly | Debris in wheels/bearings; lack of lubrication; damaged wheel. | Clean wheels and bearings. Apply lubricant. Inspect for damage and replace if necessary. |
| Brake not engaging/disengaging | Mechanism obstructed; worn brake components. | Clear any obstructions. Check for wear and tear on the brake pedal and mechanism. |
| Workbench unstable or wobbling | Loose mounting screws; uneven installation. | Tighten all mounting screws. Ensure casters are installed at the same height and level. |
| Squeaking noise during movement | Dry bearings or swivel mechanism. | Apply lubricant to the swivel and wheel bearings. |
User Tips
- For heavy workbenches, consider installing the casters slightly inward from the corners to distribute weight more effectively and enhance stability.
- When moving the workbench, try to keep the path clear of small debris or cords to prevent snagging or damage to the wheels.
- If your workbench is frequently moved across different floor types, regularly check the polyurethane wheels for embedded particles that could scratch sensitive surfaces.
- Always engage the brakes when performing tasks that require a stable surface, such as cutting, drilling, or precision assembly.
Warranty and Support
SucceBuy products are manufactured to high-quality standards. For any questions, concerns, or support needs regarding your workbench caster wheels, please contact SucceBuy customer service. Please have your model number (CC-CZJL-2.5) and purchase information ready when contacting support.
