Ainavi Car Radio Multimedia System

Introduction

Thank you for choosing the Ainavi Car Radio Multimedia System. This manual provides essential information for the proper installation, operation, and maintenance of your new car radio. Please read it thoroughly before use to ensure optimal performance and safety. This system is designed to enhance your driving experience with advanced features like wireless CarPlay, Android Auto, GPS navigation, and multimedia entertainment.

Figure 1: Ainavi Car Radio Multimedia System installed in a Toyota RAV4 XA50 dashboard.

Package Contents

Please check the package for the following items:

• Frame + Screen (Main Unit)
• Power cable
• USB cables (x2)
• Rear CAM input cable
• GPS antenna
• SIM+4G antenna (Only for 4G version)

Figure 2: List of included products.

Specifications

The Ainavi Car Radio Multimedia System offers various models with different specifications. Below is a general overview and a detailed table for specific models.

Figure 3: Model Specifications Table.

Note: A1/A3 models do not support CarPlay and Android Auto functions.

Installation Guide

The Ainavi Car Radio Multimedia System is designed for 'Plug and Play' installation. However, professional installation is recommended.

1. Pre-Installation Check

• Ensure your vehicle is a Toyota RAV4 XA50 model (2020-2025).
• Verify all components listed in the 'Package Contents' section are present.
• If your original radio has a large cover behind it, you may need to purchase an additional plastic cover for proper fitment.

Figure 4: Note regarding the need for a plastic cover if your original radio has a large back cover.

2. Wiring and Connections

The system comes with the correct cables based on your car model. Simply plug them into the original plugs.

Figure 5: Plug and Play installation.

3. Cable Layout Recommendations

For optimal performance and aesthetics, consider the following cable routing:

• USB Port and SIM Card Slot Cables: Route these to the storage compartment located on the passenger side.
• GPS and 4G Antennas: Install these either on the right front portion of the dashboard or within the A-pillar. To optimize signal reception, the antenna module's black side should be positioned facing upwards.

Figure 6: Recommended cable layout for optimal signal and tidy installation.

4. Original Camera Compatibility

Style B models include an LVDS adapter to support original cameras. If you have an original camera and are experiencing issues, ensure you have the correct model and all necessary adapters are properly connected.

Figure 7: Various views of the car radio installed in a Toyota RAV4 XA50.

Operation Guide

1. User Interface (Ainavi UI 5.0)

The Ainavi UI 5.0 offers a new level of customization with an intuitive layout and editable shortcuts. You can tailor the user interface to your preferences for effortless navigation and efficient operation.

Figure 8: Ainavi UI 5.0 with editable shortcuts.

2. Wireless CarPlay & Android Auto

Enjoy seamless smartphone integration with wireless CarPlay and Android Auto on A2, G5, H5, and H6 models. This feature allows you to use mobile apps like maps and music directly on the screen, enabling hands-free control of calls, music, and navigation.

Figure 9: Wireless CarPlay and Android Auto in action.

3. Global Positioning System (GPS)

The H6 model boasts advanced positioning with support for GPS, Galileo, GLONASS, and BeiDou satellite systems. This multi-constellation technology delivers faster and more accurate location tracking for precise navigation and route guidance.

Figure 10: Global Positioning System interface.

4. Multimedia Entertainment

Support HD video and lossless music playback. After connecting to the Internet, you can watch Netflix, YouTube, Disney+, and other video apps. The system also supports 4K video playback and a Picture-In-Picture function.

Figure 11: Multimedia features including FM/AM/RDS, USB ports, and video playback.

5. Split Screen Functionality

Multitask effortlessly with split-screen functionality. Run two apps simultaneously on a single screen for enhanced efficiency and productivity, such as navigation and music playback.

Figure 12: Split Screen mode for multitasking.

6. Digital Theater System (DSP)

The system features a Digital Theater System (DTS) with 48EQ (H5, G5, H6 models) or 12EQ (A3, A4/A2 models) for superior audio quality. Adjust sound field settings, bass enhancement, and wave filters to customize your listening experience.

Figure 13: Digital Theater System (DTS) settings.

7. Gyroscope Function

The gyroscope function allows you to monitor the tilt angle of the car during driving, greatly improving driving safety.

Figure 14: Gyroscope function display.

8. Steering Wheel Control (SWC)

After installation, you can use the buttons on your steering wheel to control the screen, providing convenience and reducing distractions while driving.

Figure 15: Steering Wheel Control in use.

9. Day and Night Modes

The Ainavi UI 5.0 supports switching between day and night modes, which can be linked to your car's light settings for automatic adjustment, improving visibility and reducing eye strain.

Figure 16: Ainavi UI 5.0 Day/Night mode.

Maintenance

1. Screen Care

The screen features Full Lamination Technology (FLT) to improve display quality, reduce reflection, and prevent dust from entering. Clean the screen with a soft, lint-free cloth. Avoid using harsh chemicals or abrasive materials.

Figure 17: Full Lamination Tech for screen durability.

2. Cooling System

The H6, H5, and G5 models include a powerful built-in cooling fan, providing up to 6000 revolutions per minute to effectively reduce chip temperature and ensure smoother operation. Ensure the fan vents are not obstructed.

Figure 18: Cooling fan performance data.

Troubleshooting

• No power: Check all power cable connections. Ensure the vehicle's ignition is on.
• No sound: Verify speaker connections. Check audio settings (DSP, volume). Ensure the original sound system is supported and correctly configured.
• GPS signal weak/lost: Ensure the GPS antenna is installed in an optimal location (dashboard or A-pillar, black side facing up) and not obstructed.
• 4G/WiFi connectivity issues: Check the 4G antenna connection (if applicable). Ensure SIM card is correctly inserted and activated. Verify WiFi settings. Note that 4G network compatibility varies by region.
• CarPlay/Android Auto not connecting: Ensure your phone is compatible and connected via USB or Bluetooth as required. A1/A3 models do not support these functions.
• Original camera not working: For Style B models, ensure the LVDS adapter is correctly installed. Verify all camera connections.

User Tips

• When installing, take clear pictures of your original car radio and send them to customer service if you are unsure about cable compatibility. This helps ensure you receive the correct cables.
• If you have an original rearview camera, confirm compatibility with the specific model you purchase (e.g., Style B with LVDS adapter) to avoid issues.
• Utilize the editable shortcuts in Ainavi UI 5.0 to personalize your home screen for quick access to frequently used apps.
• For optimal audio, experiment with the DSP settings (EQ, Bass Enhancement, Sound Field Settings) to match your preferences and vehicle acoustics.

Warranty and Support

Ainavi products are designed for quality and reliability. For any technical assistance or warranty claims, please contact Ainavi customer support. Keep your purchase receipt as proof of purchase.

The product has received the following certifications:

• CE
• FCC
• RoHS
• WEEE
• CCC

Figure 19: Qualification Certificates.

For further information or assistance, please refer to the official Ainavi website or contact their customer service directly.