Introduction
Thank you for purchasing the BESTVA DC SERIES LED Grow Light. This manual provides detailed instructions for mounting, installation, and proper usage of the product. Please read and understand this manual completely before using the product to ensure optimal performance and safety. Only use the product as specified herein.
For any issues or assistance, please contact our customer service team at support@bestvaled.com.
Package Contents
Before installation, please verify that all components are present and undamaged.
- LED Grow Light (KP4000)
- Metal Hanger
- Adjustable Hanger Rope
- Input Power Cord

Setup and Installation
Follow these steps to properly install your KINGLED Grow Light:
- Step One: Unbox and Attach Hangers
Unbox the metal hanger kits. Attach the four small hooks to the four holes located on the back side of the light fixture. - Step Two: Connect and Hang
Connect the adjustable rope ratchet to the metal hangers. Hang the light above your plants at the appropriate height, as recommended in the "Operating Instructions" section. - Step Three: Power Connection
Plug the input power cord into a suitable electrical socket. Turn on the VEG switch or BLOOM switch as needed for your plant's growth stage.

Operating Instructions
7.1 Planting Related Suggestions
The KINGLED Grow Light offers a full spectrum suitable for various plant growth stages. The following table provides general suggestions for switch choice, lighting time, and hanging height. Adjust these parameters based on your specific plant needs.
| Plant Stage | Switch Choice | Lighting Time | Hanging Height |
|---|---|---|---|
| Seedling | VEG | 15-18 h/d | 24-30 Inches |
| Vegetative | VEG | 15-18 h/d | 18-24 Inches |
| Flowering | BLOOM | 12-14 h/d | 12-18 Inches |
| Fruiting | VEG & BLOOM | 12-14 h/d | 12-18 Inches |
7.2 Use Environment
This product is designed for use in greenhouses and climate-controlled LED rooms. It can also be used in damp environments.
- Important: Do NOT use this product outdoors or expose it to water.
- The LED fixture operates optimally when the ambient air temperature is between 68~95°F (20~35°C).
Optimized Full Spectrum
The DC series provides a 12-band wavelength spectrum crucial for precise crop growth. It includes 3000K Warm White, 5000K Cold White, 460nm Blue, and 660nm Red light. This spectrum is designed to simulate sunlight and provide appropriate light for plants at different growth stages, from seedling to flowering.

PPFD Map (Photosynthetic Photon Flux Density)
The PPFD map illustrates the light intensity available to plants at different heights. This helps in positioning the grow light for optimal plant growth.

Maintenance
Proper maintenance ensures the longevity and optimal performance of your grow light.
- Cooling Down: Always allow for a cooling down period of at least 30 minutes before touching the LED board.
- Cleaning: Regularly check the LED light for dust or dirt buildup. Clean as necessary using a dry cloth. Do not use sulfur vaporizers or water misters.
- Storage: Store the LED fixture in a dry and clean environment, with an ambient temperature range of -4~185°F (-20~85°C).
Troubleshooting
If you encounter issues with your grow light, consider the following:
- No Power: Ensure the power cord is securely plugged into both the light fixture and the electrical socket. Check if the VEG or BLOOM switch is turned on.
- Damaged Components: Do not use the light if the LED fixture or its power cord are damaged. Ensure all fittings are intact and there is no damage to the unit.
- Light Not Dimmable: Please note that this model (KP4000) is explicitly stated as "No" for "Is Dimmable" in the specifications.
Specifications (KP4000 Model)
Below are the detailed specifications for the KINGLED KP4000 LED Grow Light:
| Attribute | Value |
|---|---|
| Model Number | KP4000 |
| Actual Power | 400W |
| Input Voltage | 100-240VAC |
| Nominal Voltage | 85-265V |
| Frequency | 50/60 Hz |
| LED Chip Quantity | 2304 pcs (896 Warm White, 896 Cold White, 256 Blue, 256 Red) |
| Light Color | Red, Blue, Orange, White, IR, UV (Full Spectrum: 460NM, 660NM, 3000K, 5000K) |
| Lumen Maintenance | 10000 LM |
| PPFD at 6" | 2350 µmol/m²/s |
| PPFD at 12" | 1360 µmol/m²/s |
| PPFD at 18" | 820 µmol/m²/s |
| Color Rendering Index (CRI) | >80 |
| Is Dimmable | No |
| Body Material | Aluminum |
| Lifespan | >50,000 hours |
| Warranty | 3 years |
| Certification | CCC, ROHS, CE, FCC |
| Product Dimensions (L x W x H) | 73.3 cm x 33 cm x 10.5 cm (28.9 in x 13 in x 4.1 in) |
| Product Weight | 4.65 KG |

Warranty and Support
Warranty Information
BESTVA offers a 3-year warranty for this product. To activate your warranty, please contact our service team within 24 hours of purchase.
- Free Returns: Free returns and money-back guarantee are available for customers within 30 days from the date of purchase.
- Parts Replacement: We offer free shipping for parts needed for repair within 180 days from the date of purchase. After 180 days, the buyer is responsible for shipping costs.
- Warranty Exclusions: The warranty does not cover damage due to high moisture levels, water exposure, power surges, improper hanging/mounting, improper use, dust buildup, or user modifications.
- If parts are damaged outside of warranty coverage, please contact us; you will only be responsible for the shipping fee for replacement parts.
BESTVA reserves the right to interpret this warranty structure. For any questions regarding the warranty policy, please contact us.
Contact Support
For warranty assistance, technical support, or any other inquiries, please reach out to us:
- Email: support@bestvaled.com
- Website: bestvaled.com
You can also refer to the official user manual PDF for additional details: User Manual (PDF)
User Tips
- Optimal Placement: Utilize the provided PPFD map to position your grow light at the ideal height for your plants' current growth stage to maximize light absorption and growth efficiency.
- Environmental Control: Maintain the recommended ambient temperature (68~95°F / 20~35°C) for the grow light's environment to ensure its longevity and consistent performance.
- Regular Cleaning: A quick wipe-down with a dry cloth can prevent dust buildup on the LED board, which can otherwise reduce light output and efficiency over time.