FITUEYES AS406002GB

Contents

FITUEYES 4-Tier Media Stand Audio/Video Component Cabinet

Model: AS406002GB | Brand: FITUEYES

Introduction

Thank you for choosing the FITUEYES 4-Tier Media Stand. This instruction manual provides important information for the safe assembly, operation, and maintenance of your new audio/video component cabinet. Please read this manual thoroughly before assembly and retain it for future reference.

This media stand is designed to organize your audiovisual equipment, including TVs, sound bars, DVD players, game consoles (such as Xbox One and PS4), and speakers. Its modern, streamlined design makes it suitable for various room settings.

Assembled FITUEYES 4-Tier Media Stand with various electronic devices

Figure 1: Fully assembled media stand showcasing its capacity for electronic components.

Safety Information

Please observe the following safety precautions to prevent injury and damage to the product:

  • Always place the media stand on a flat, stable, and level surface.
  • Do not exceed the maximum weight capacity for each shelf.
  • Distribute weight evenly across the shelves to maintain stability.
  • Keep small parts away from children during assembly.
  • Avoid placing hot items directly on the glass surfaces without protection.
  • Regularly check all connections and tighten if necessary to ensure stability.
  • Do not stand or climb on the media stand.
  • Handle glass shelves with care to prevent chipping or breakage.

Package Contents

Before assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

  • Tempered Glass Shelves (4 pieces)
  • Segmented Aluminum Tubes (various lengths for different tiers)
  • Long Screw Rods
  • End Caps/Feet
  • Assembly Hardware (washers, nuts, etc.)
  • Instruction Manual

Specifications

FeatureDetail
Overall Dimensions (W x D x H)23.6” x 17.9” x 30.3” (600mm x 455mm x 770mm)
MaterialThickened Reinforced Tempered Glass, Solid Steel Frame
Number of Tiers4
Top Shelf Weight CapacityMax 110 lbs (50 kg)
Middle/Bottom Shelves Weight CapacityMax 33 lbs (15 kg) per shelf
Shelf Spacing OptionsD = 186mm, E = 234mm (adjustable)
Installation MethodSelf-contained
Diagram showing the dimensions of the media stand: 23.6 inches wide, 17.9 inches deep, 30.3 inches high, with shelf spacing and weight limits.

Figure 2: Detailed dimensions and weight capacities of the media stand.

Setup and Assembly Instructions

Assembly is quick and easy, typically taking about 30 minutes. No special tools are required; components are tightened by hand.

  1. **Unpack and Identify Parts:** Carefully remove all components from the packaging. Lay them out and compare them against the package contents list to ensure everything is present.
  2. **Prepare the Base:** Attach the feet/end caps to the bottom glass shelf. Ensure they are securely tightened by hand.
  3. **First Tier Assembly:** Insert the long screw rods into the designated holes on the bottom glass shelf. Then, place the segmented aluminum tubes over the screw rods.
  4. **Second Shelf Placement:** Carefully lower the next glass shelf onto the aluminum tubes, aligning the holes with the screw rods.
  5. **Customize Shelf Spacing (Optional):** The stand allows for flexible shelf spacing. Refer to Figure 4 for different configuration options (D=186mm, E=234mm). Choose the appropriate length of segmented aluminum tubes to achieve your desired spacing.
  6. **Repeat for Remaining Tiers:** Continue stacking aluminum tubes and glass shelves, ensuring each layer is stable before proceeding.
  7. **Top Shelf and Final Tightening:** Place the top glass shelf. Once all shelves and tubes are in place, ensure all screw rods are properly secured within the end caps and all connections are hand-tightened firmly to prevent any wobbling.
Close-up of tempered glass, long screw rod connection structure, and segmented aluminum tube structure, highlighting the sturdy construction.

Figure 3: Structural details showing the long screw rod connection and segmented aluminum tube design.

Diagram illustrating three different configurations for shelf spacing, labeled 1, 2, and 3, with D=186mm and E=234mm indicating adjustable heights.

Figure 4: Multifunctional storage options with adjustable shelf heights.

Operating Instructions

Once assembled, your FITUEYES Media Stand is ready for use:

  • **Placement:** Position the stand in your desired location, ensuring it is on a stable and level surface.
  • **Equipment Placement:** Carefully place your audio/video components on the shelves. Ensure that the weight of each item does not exceed the maximum capacity for that shelf (110 lbs for the top shelf, 33 lbs for middle/bottom shelves).
  • **Cable Management:** Utilize the open design for easy cable routing and management to keep your setup tidy.
  • **Ventilation:** The open design also promotes good airflow around your electronics, helping to prevent overheating.

Maintenance

To keep your media stand in excellent condition:

  • **Cleaning Glass:** Use a soft, lint-free cloth and a glass cleaner to wipe down the tempered glass shelves. Avoid abrasive cleaners or harsh chemicals that could scratch or damage the glass.
  • **Cleaning Frame:** Wipe the steel frame with a soft, damp cloth. Dry immediately to prevent water spots or rust.
  • **Regular Checks:** Periodically check all connections (screw rods, tubes, feet) and tighten them by hand if they feel loose. This ensures the stand remains sturdy and stable.
  • **Avoid Overloading:** Do not place items heavier than the specified weight limits on any shelf.

Troubleshooting

If you encounter any issues with your media stand, refer to the following common solutions:

  • **Stand is Wobbly:**
    • Ensure the stand is on a completely flat and level surface.
    • Check all screw rod connections and aluminum tube fittings. Hand-tighten them firmly until the wobble is eliminated.
    • Verify that the metal tubes are properly secured in the end caps.
  • **Glass Shelf Appears Uneven:**
    • Re-check the assembly of the segmented aluminum tubes to ensure they are all of the correct length for their position and fully seated.
    • Ensure the screw rods are inserted evenly and fully tightened.
  • **Difficulty Assembling:**
    • Review the assembly instructions carefully, paying close attention to the diagrams.
    • Ensure you are using the correct components for each step, especially when customizing shelf spacing.
    • Do not force parts; if they don't fit, re-check alignment.

User Tips

  • **Consider Shelf Spacing:** Before final assembly, plan the arrangement of your components. Use the adjustable shelf spacing options (D=186mm, E=234mm) to best fit your devices and allow for adequate ventilation.
  • **Cable Management:** While the open design helps, consider using cable ties or sleeves to keep wires organized and out of sight for a cleaner look.
  • **Robot Vacuum Friendly:** The design allows sweeping robots to clean underneath, making floor maintenance easier.

Warranty and Support

For any questions, concerns, or assistance with your FITUEYES Media Stand, please contact the seller or manufacturer's customer support. Please retain your proof of purchase for warranty claims.

This product is designed for durability and ease of use. Should you encounter any issues not covered in this manual, professional assistance is recommended.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.