1. Introduction
This manual provides detailed instructions for assembling and maintaining your MOC-220988 VCARB 02 Formula Car building block model. This set consists of 301 high-quality ABS plastic parts, designed to create a detailed replica of a Formula Car. Please read all instructions carefully before beginning assembly.

Figure 1: Assembled MOC-220988 VCARB 02 Formula Car
2. Safety Information
- WARNING: Do not eat. This product contains small parts which may pose a choking hazard. Keep out of reach of very young children.
- California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Always assemble the model on a clean, flat surface to prevent loss of small parts.
3. Package Contents
Your MOC-220988 VCARB 02 Formula Car building block set includes:
- 301 building block parts made from environment-friendly ABS plastic.
- The set is packaged in a sealed bag; no original box is included.
Note on Parts:
- Some electroplated or printed parts may be replaced with ordinary, non-printed parts.
- Out-of-print parts may be substituted with alternative compatible parts.
- Minor color differences from the manual may occur for a few parts, typically internal components that do not affect the model's overall appearance.
4. Setup and Assembly
- Obtain Instructions: The detailed building instructions will be sent to you via email in PDF format. Please ensure you provide your email address to the seller after completing your purchase to receive these instructions.
- Unpack and Organize: Carefully open the sealed bag and lay out all parts on a clean, organized surface. It is recommended to sort parts by color and type to facilitate assembly.
- Follow PDF Instructions: Refer to the emailed PDF instruction manual for step-by-step assembly guidance. Each step will illustrate which parts are needed and how they connect.
- Component Replacement (Tires/Rims): Pay attention to any specific instructions regarding component replacement, such as for tires and rims, as illustrated in Figure 2. Ensure correct orientation and secure fitting.

Figure 2: Tire and Rim Component Replacement Diagram
5. Operating the Model
This MOC-220988 VCARB 02 Formula Car is a static display model designed for creative play and exhibition. Once assembled, it can be used for:
- Display: Showcase your completed model on a shelf, desk, or in a display case.
- Creative Play: Engage in imaginative play scenarios, simulating races or other adventures.
The model is not motorized and does not require batteries for operation.
6. Maintenance
To keep your building block model in excellent condition:
- Cleaning: Use a soft, dry cloth or a small brush to gently remove dust from the model. For stubborn dirt, a slightly damp cloth can be used, but avoid excessive moisture.
- Storage: Store the model away from direct sunlight and extreme temperatures to prevent discoloration or warping of the plastic parts.
- Handling: Handle the model with care to avoid accidental disassembly or damage to delicate parts.
7. Troubleshooting
- Missing Parts: In the rare event that you find parts missing from your set (e.g., tires or rims), please contact the seller immediately. A free missing part replacement service is provided.
- Difficulty Assembling: If you encounter difficulty with a specific step, double-check the PDF instructions and ensure you are using the correct parts and orientation. Sometimes, a small part may be overlooked.
- Parts Don't Fit: Ensure you are using the correct parts for the step. Building blocks are designed for a snug fit, but excessive force should not be necessary.
8. Specifications
| Attribute | Detail |
|---|---|
| Model Number | MOC-220988 |
| Number of Parts | 301 |
| Material | ABS Plastic |
| Block Size | Small building block (Compatible with Lego) |
| Recommended Age | 14+ years, 18+ years |
| Gender | Unisex |
| Origin | Mainland China |
| Certification | CE (Certificate Number: U00807210924419-1E) |
| Is Electric | No Battery |
| Package Dimensions (approx.) | 20cm (Length) x 20cm (Width) x 20cm (Height) |
| Package Weight (approx.) | 0.5 kg |
9. User Tips
- Check Parts Immediately: Upon receiving your building block set, it is highly recommended to check all parts against the inventory list in the PDF instructions to ensure no components are missing. This helps in promptly addressing any discrepancies.
- Organize Your Workspace: Before starting assembly, organize your parts into small containers or trays. This prevents small pieces from getting lost and makes the building process more efficient and enjoyable.
- Take Your Time: Building block models are meant to be a relaxing and engaging activity. Do not rush the assembly process. Enjoy each step and the gradual formation of your model.
10. Warranty and Support
The seller provides a free missing part replacement service. If you discover any missing components in your building block set, please contact the seller directly with details of the missing parts. They will assist you in obtaining the necessary replacements.
For any other inquiries or support regarding your MOC-220988 VCARB 02 Formula Car model, please reach out to the seller through your purchase platform.