HWATEL HWATEL 3-Band Cellular Signal Amplifier

Contents

HWATEL 3-Band Cellular Signal Amplifier User Manual

Model: HWATEL 3-Band Cellular Signal Amplifier

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your HWATEL 3-Band Cellular Signal Amplifier. This device is designed to improve cellular signal strength for 2G, 3G, and 4G networks across the 900MHz (Band 8), 1800MHz (Band 3), and 2100MHz (Band 1) frequency bands. It features advanced technologies like Automatic Gain Control (AGC) and Automatic Level Control (ALC) for optimal performance and extended lifespan.

Key Features:

  • 3-Band Signal Booster: Supports 900MHz (B8), 1800MHz (B3), 2100MHz (B1).
  • High Gain: Up to 75dB gain and 27dBm power output.
  • Advanced Control: Automatic Gain Control (AGC) and Automatic Level Control (ALC) for stable operation and extended service life.
  • Numerical Display: Provides accurate real-time signal information.
  • Isolated Modular Design: 11 isolated modulars to prevent interference.
  • Durable Construction: Telecom Grade ABS case with 400 heat sink holes for efficient cooling.
  • Qualcomm Chip: Features a 2022 version Qualcomm chip for enhanced processing (note: while the chip may be 5G capable, this booster primarily supports 2G/3G/4G networks on the specified bands).
  • Environmental Protection Design: Seamless welding partition of tin plate for body components to eliminate electromagnetic radiation.
HWATEL 3-Band Cellular Signal Amplifier with supported frequencies and carrier logos
Figure 1: HWATEL 3-Band Cellular Signal Amplifier showing supported frequencies (900, 1800, 2100 MHz) and compatible European/Asian carriers.
Comparison of old and new signal booster models highlighting upgraded features
Figure 2: Comparison of previous and current booster models, highlighting the upgrade to 75dBi gain, 27dBm power, and 11 isolated modulars for improved performance and reduced interference.

2. Package Contents

Please check the box for the following items:

  • 1 x HWATEL 3-Band Cellular Signal Amplifier (Booster)
  • 1 x Power Adaptor

Note: Antennas and cables are NOT included and must be purchased separately.

Contents of the product box: signal booster and power adapter
Figure 3: Items included in the package: the signal booster and its power adapter. Antennas and cables are not included.

3. Pre-Installation Check

Before installing the booster, it is crucial to verify two conditions:

  1. Signal Level: The outdoor signal level must be better than 3 Bars (-108dB).
  2. Signal Frequency: The signal frequency must be the SAME as the booster's supported bands (900MHz, 1800MHz, 2100MHz).

The booster will NOT work if these conditions are not met.

Use the following methods to check your signal information:

  • Android: Use apps like "Network cell info lite" or "Cellular-Z APP" to check network details.
  • iOS: Dial *3001#12345#* and navigate to "Serving Cell info".
  • Samsung: Dial *#0011#* to enter "ServiceMode".
Diagram explaining how to check signal strength and frequency on Android, iOS, and Samsung devices
Figure 4: Instructions for checking current signal strength and frequency on various mobile operating systems to ensure compatibility and effectiveness of the booster.

4. Setup Instructions

Follow these steps carefully to install your HWATEL Cellular Signal Amplifier:

  1. Outdoor Antenna Placement:

    Measure and find a position outdoors with a signal strength better than -95dB (at least 2 bars). Install the outdoor antenna in this location, ensuring it is pointed towards the nearest cellular tower.

  2. Connect Outdoor Antenna:

    Connect the outdoor antenna to the booster's "BTS" (Base Transceiver Station) port using a suitable cable (not included).

  3. Connect Indoor Antenna:

    Connect the indoor antenna to the booster's "MS/Mobile" port using a suitable cable (not included).

  4. Power On and Adjust:

    Plug in the power adaptor to the booster and a power outlet. Power on the booster. Carefully adjust the direction and height of the outdoor antenna to achieve the best possible signal. Then, adjust the indoor antenna to ensure the desired coverage area is adequately covered.

Important: The outdoor and indoor antennas MUST be separated by a wall or a distance of over 10 meters to prevent oscillation and ensure proper operation.

Detailed installation diagram for the cellular signal booster, showing outdoor and indoor antenna placement and connections
Figure 5: Step-by-step installation guide, illustrating the connection of outdoor and indoor antennas to the booster and the importance of antenna separation.

5. Operating Instructions

Once properly installed and powered on, the HWATEL signal amplifier will automatically begin to boost the cellular signal. The device features a numerical LCD display that provides real-time operational status.

Understanding the LCD Display:

Close-up of the signal booster's LCD display showing channel information, signal strength, and status indicators
Figure 6: The LCD display shows signal strength for each channel (CH1, CH2, CH3) corresponding to the 900/1800/2100MHz bands, along with indicators for ALC (Automatic Level Control), TEMP (Temperature), and POW (Power).
  • CH1, CH2, CH3: These represent the three frequency bands (900MHz, 1800MHz, 2100MHz). The bars next to each channel indicate the current signal strength.
  • dBm Value: Displays the signal power in dBm. A higher (less negative) dBm value indicates a stronger signal.
  • ALC: Automatic Level Control indicator. When active, it helps prevent signal overload and extends the device's lifespan.
  • TEMP: Temperature indicator.
  • POW: Power indicator.

The Automatic Level Control (ALC) feature is designed to automatically adjust the booster's output power to prevent saturation and ensure stable operation, significantly prolonging the device's service life.

Diagram illustrating the function of Automatic Level Control (ALC) in extending the booster's lifespan
Figure 7: Explanation of ALC (Automatic Level Control) which helps extend the service life of the booster by managing signal levels.

6. Maintenance

To ensure optimal performance and longevity of your signal amplifier, follow these maintenance guidelines:

  • Keep Clean: Regularly wipe the exterior of the booster with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Ventilation: Ensure the booster is placed in a well-ventilated area. Do not block the heat sink holes (400 heat sink holes are designed for efficient cooling).
  • Cable Integrity: Periodically check all cable connections for tightness and signs of wear or damage. Loose connections can degrade performance.
  • Antenna Position: Ensure outdoor and indoor antennas remain in their optimal positions and are not obstructed.
  • Environmental Conditions: Protect the outdoor antenna from extreme weather conditions. The booster itself should be kept in a dry, indoor environment.
Image showing the environmental protection design of the booster, emphasizing seamless welding and electromagnetic radiation elimination
Figure 8: The booster features an environmental protection design with seamless welding and tin plate partitioning to minimize electromagnetic radiation, contributing to a more comfortable user experience.
Internal view of the booster highlighting the Qualcomm chip, heat sink holes, and robust design
Figure 9: The HWATEL Patent Based Design includes a Qualcomm Chip (2022 version), ultra-low power consumption, and 400 heat sink holes for enhanced durability and performance.

7. Troubleshooting

If you experience issues with your signal amplifier, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No signal improvement
  • Outdoor signal too weak (below -108dB or 3 bars).
  • Antennas not properly aligned or separated.
  • Incorrect frequency band selected/booster not compatible with local frequency.
  • Loose cable connections.
  • Verify outdoor signal strength and frequency using a mobile app (see Section 3).
  • Adjust outdoor antenna direction towards the cell tower.
  • Ensure outdoor and indoor antennas are separated by at least 10 meters or a wall.
  • Check all cable connections for tightness.
  • Confirm your local carrier's frequency bands match the booster's supported bands (900/1800/2100MHz).
Booster not powering on
  • Power adaptor not connected or faulty.
  • Power outlet not working.
  • Ensure the power adaptor is securely connected to the booster and a working power outlet.
  • Test the power outlet with another device.
Intermittent signal or dropped calls
  • Interference between outdoor and indoor antennas.
  • Weak incoming signal.
  • Increase the separation distance between the outdoor and indoor antennas.
  • Re-adjust outdoor antenna for a stronger, more stable signal.

8. Specifications

FeatureDetail
TypeModem Cable (Cellular Signal Amplifier/Booster)
Supported Frequencies900MHz (Band 8), 1800MHz (Band 3), 2100MHz (Band 1)
Gain75dB
Power Output27dBm
Control FeaturesAGC (Automatic Gain Control), ALC (Automatic Level Control)
DisplayNumerical LCD
Modular Design11 isolated modulars
ChipsetQualcomm Chip (2022 version)
Case MaterialTelecom Grade ABS
Cooling400 heat sink holes
Dimensions (approx.)200mm (L) x 154mm (W) x 28mm (H)
Weight (approx.)1.4 kg (package weight)
CertificationCE, FCC, RoHS
Certification of Conformity document for the signal booster, listing CE, FCC, and RoHS standards
Figure 10: Certification of Conformity, indicating compliance with CE, FCC, and RoHS standards for the multiband mobile signal amplifier.
Diagram illustrating the three-level filtering combination design for signal stability
Figure 11: The "King of STABILITY" diagram, showing the three-level filtering combination design that amplifies the target signal layer by layer, ensuring high signal-to-noise ratio and stable transmission.

9. User Tips

  • Antenna Separation is Key: Many users find that maximizing the distance between the outdoor and indoor antennas, both horizontally and vertically, significantly improves performance and prevents feedback issues. A minimum of 10 meters or a solid wall separation is crucial.
  • Outdoor Signal Strength: The booster amplifies an existing signal. If the outdoor signal is very weak (less than 2-3 bars), the booster's effectiveness will be limited. Try to find the strongest possible outdoor signal location for your antenna.
  • Check Frequencies: Before purchasing or installing, always confirm your local carrier's operating frequencies match the booster's supported bands (900/1800/2100MHz). Use the diagnostic codes provided in Section 3.
  • Cable Quality: Invest in high-quality, low-loss coaxial cables for connecting your antennas to the booster. Poor quality or excessively long cables can lead to significant signal loss.
  • Fine-Tuning: After initial setup, spend some time fine-tuning the outdoor antenna's direction. Even small adjustments can lead to noticeable improvements in signal strength.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.

The product is certified with CE, FCC, and RoHS standards, ensuring compliance with relevant safety and environmental regulations.

© 2024 HWATEL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.