Introduction
This manual provides essential instructions for the safe and efficient operation and maintenance of your FLB800 6L Stainless Steel Electric Deep Fryer. Designed for both commercial and home use, this fryer is suitable for preparing a variety of fried foods such as French fries, chicken wings, chicken legs, fish, and steak. Please read this manual thoroughly before initial use and retain it for future reference.
Important Safety Instructions
To prevent personal injury or property damage, always follow basic safety precautions when using electrical appliances. This appliance is intended for frying food only. Misuse can result in serious injury.
- Keep Away from Children: This appliance is not intended for use by children. Close supervision is necessary when any appliance is used near children.
- Never Leave Unattended: Do not leave the appliance unattended when it is connected to a power outlet or in operation.
- Electrical Power Requirements:
- Ensure the socket used has wiring of more than 1.5 square meters.
- Standard wall sockets may not be sufficient; if the wiring is more than 2.5 square meters, it is recommended to use an air switch for safety.
- Refer to the actual product label for the exact wattage. If the received product is 3000W, ensure your electrical circuit can safely handle this power load.
- Hot Surfaces: The fryer and its components become extremely hot during and after use. Always use the plastic handles provided with the basket and allow the unit to cool completely before cleaning or handling.
- Oil Safety:
- Never fill the fryer with oil beyond the maximum fill line.
- Do not mix different types of oil.
- Exercise extreme caution when adding food to hot oil to prevent splashing. Ensure food is as dry as possible.
- Ventilation: Use the fryer in a well-ventilated area.
- Cleaning: Always unplug the fryer and allow it to cool completely before cleaning. Do not immerse the control panel or heating element in water.
Product Overview and Components
The FLB800 Deep Fryer is constructed from durable stainless steel and features a single tank design. Key components include:
- Stainless Steel Fryer Body
- Removable Control Panel with Temperature Dial and Indicator Lights
- Heating Element (S-shaped heat pipes)
- Heat Conductor
- Heat Pipe Protective Plate
- Stainless Steel Fryer Basket with Plastic Handle
- Lid with Plastic Knob

Figure 1: Full view of the FLB800 6L Stainless Steel Electric Deep Fryer.

Figure 2: Internal components including heat conductor, S-shaped heat pipes, and heat pipe protective plate.

Figure 3: Removable heating element assembly.

Figure 4: Fryer basket.
Setup
- Unpacking: Carefully remove all components from the packaging. Retain packaging for storage or return if necessary.
- Placement: Place the fryer on a stable, flat, heat-resistant surface. Ensure there is adequate clearance around the fryer for ventilation and to prevent heat damage to surrounding surfaces.
- Assembly:
- Insert the heating element assembly into the main fryer body, ensuring it is securely seated.
- Place the heat pipe protective plate at the bottom of the oil tank, above the heating elements.
- Position the fryer basket inside the tank.
- Place the lid on top of the fryer.
- Electrical Connection: Before plugging in, ensure the power supply matches the voltage specified on the product label (UK 220-240V). Connect the fryer to a properly grounded electrical outlet that meets the wiring requirements mentioned in the Safety Instructions.
Operating Instructions
- Fill with Oil: Pour cooking oil into the fryer tank. Ensure the oil level is between the MIN and MAX fill lines indicated inside the tank. Do not overfill or underfill.
- Power On: Plug the fryer into a suitable electrical outlet. The power indicator light (usually red) will illuminate.
- Set Temperature: Turn the temperature selection dial to your desired frying temperature. The temperature range is 0°C to 200°C. The heating indicator light (usually green) will turn on, indicating that the heating elements are active.

Figure 5: Control panel with temperature settings and recommended frying temperatures.
Recommended Frying Temperatures:
Food Item Temperature (°C) Temperature (°F) French Fries 143°C 280°F Chicken 179°C 350°F Fish 179°C 350°F Steak 179°C 350°F - Preheating: Allow the oil to preheat to the set temperature. The heating indicator light will turn off once the desired temperature is reached and cycle on/off to maintain it.
- Frying Food: Carefully place food into the fryer basket. Lower the basket slowly into the hot oil. Do not overload the basket, as this can lower the oil temperature and result in soggy food.
- Monitor Frying: Keep an eye on the food as it fries. The lid can be used to cover the fryer during cooking, but be aware of condensation.
- Remove Food: Once food is cooked to your preference, carefully lift the basket out of the oil. Allow excess oil to drain back into the tank.
- Serve: Transfer fried food to a plate lined with paper towels to absorb any remaining oil.
- Power Off: After use, turn the temperature dial to the "OFF" position and unplug the fryer from the electrical outlet.

Figure 6: Note on control panel variations: New Type vs. Old Type. Functionality remains similar.
Maintenance and Cleaning
Regular cleaning and maintenance will extend the life of your deep fryer and ensure safe operation.
- Cool Down: ALWAYS unplug the fryer and allow it to cool completely before attempting any cleaning. Hot oil and surfaces can cause severe burns.
- Drain Oil: Once cooled, carefully drain the oil from the tank. Filter and store reusable oil properly, or dispose of used oil according to local regulations.
- Disassemble: Remove the control panel with the heating element, fryer basket, and heat pipe protective plate from the tank.
- Clean Components:
- The stainless steel tank, fryer basket, and lid can be washed with warm, soapy water. Rinse thoroughly and dry completely.
- Wipe the exterior of the control panel and heating element with a damp cloth. NEVER immerse the control panel or heating element in water or any other liquid.
- Ensure all parts are completely dry before reassembling or storing.
- Reassemble and Store: Reassemble the fryer once all components are clean and dry. Store the fryer in a cool, dry place.
Troubleshooting
If you encounter issues with your deep fryer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fryer does not turn on. | Not plugged in; power outlet issue; circuit breaker tripped. | Ensure the fryer is securely plugged into a working outlet. Check your home's circuit breaker. Verify the outlet meets wiring requirements. |
| Oil is not heating up. | Temperature dial set to OFF or too low; heating element not properly seated; faulty heating element. | Turn the temperature dial to the desired setting. Ensure the heating element assembly is correctly installed. If problem persists, contact support. |
| Heating indicator light does not turn off. | Thermostat issue; continuous heating. | Unplug the unit immediately. Do not use if the heating element does not cycle off. Contact support. |
| Food is soggy or not crispy. | Oil temperature too low; too much food in basket; food not dry enough. | Allow oil to reach full temperature before adding food. Fry in smaller batches. Pat food dry before frying. |
Specifications

Figure 7: Product dimensions.
| Feature | Detail |
|---|---|
| Model Number | FLB800 |
| Material | Stainless Steel |
| Maximum Capacity | 6 Liters |
| Frequency | 50-60Hz |
| Wattage | 2.2 KW (Note: Some units may be 3.0 KW; check product label) |
| Voltage | 220-240V (UK Standard) |
| Maximum Temperature | 200°C (392°F) |
| Dimensions (Approx.) | 44 cm x 28.5 cm x 28 cm (17.32'' x 11.22'' x 11.2'') |
| Package Weight (Approx.) | 4.8 kg (4800g) |
User Tips
Based on general deep fryer usage and common practices:
- For best results, ensure food is thawed and patted dry before frying to prevent excessive splattering and to achieve a crispier finish.
- Do not overcrowd the basket; fry in small batches to maintain oil temperature and ensure even cooking.
- Regularly filter your cooking oil to remove food particles, which helps extend the oil's life and keeps food tasting fresh.
- Always use oils with a high smoke point suitable for deep frying.
Note: No specific user tips were available from provided customer reviews or Q&A data.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.