Before using the product, please read this manual carefully and keep it for future reference. Illustrations of product, accessories, and user interface in this user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
Important Safety Information
⚠️ Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.
This video provides a quick visual guide to the W5 Electric Scooter, demonstrating its features and basic operation including charging, folding, app connectivity, speed modes, and safety features like lighting and braking.
Package Contents
Image showing the W5 Electric Scooter and its charger.
Scooter
Charger
Image showing the mounting hardware kit.
Mounting Hardware Kit (including 2 spare bolts)
User Manual & Safety Instructions (PDF reference: View PDF)
Product Overview
Detailed diagram of the W5 Electric Scooter highlighting its main components.
Bell
Brake Lever
Folding Buckle
Headlight
Display
Throttle
Hanger
Stem
Folding Knob
Kickstand
Charging Port
Hook
Rear Fender
Taillight & Brake Light
Disc Brake
Setup and Assembly
1. Scooter Assembly
Visual guide for assembling the scooter's handlebar and stem.
Raise the stem to the riding position and fully tighten the folding knob.
Install the handlebar assembly onto the stem. Pre-tighten all four bolts, then fully tighten them using the supplied hex wrench.
2. Folding and Unfolding
Folding
Diagram illustrating the folding process for compact storage.
Turn the scooter off.
Loosen the folding knob.
Fold down the stem so that the folding buckle on the handlebar catches the hook on the rear fender.
Unfolding
Diagram illustrating the unfolding process for riding.
Press the folding buckle to release it from the hook.
Lift the stem to the riding position.
Fully tighten the folding knob.
Operating Instructions
The scooter's display shows real-time speed, battery level, and riding mode. The power button controls various functions.
Power ON/OFF: Press and hold the Power button to turn the scooter on/off.
Headlight & Taillight ON/OFF: With the scooter powered on, press the Power button once to turn the headlight & taillight on/off.
Switching Riding Mode: With the scooter powered on, double-press the Power button to cycle through the riding modes (6 / 15 / 25 km/h).
Switching Speed Unit: With the scooter powered on, press the Power button three times to switch between km/h and mph.
Zero Start and Non-zero Start: With the scooter powered on, press the Power button four times to switch between zero start and non-zero start.
Cruise Control ON/OFF: With the scooter powered on, press the Power button five times to enable or disable cruise control.
Important Notes:
The scooter will automatically shut down if there is no operation for 10 minutes.
When cruise control is turned on, maintain a constant speed for 5 seconds, and the scooter will continue at this speed without throttle input.
Charging Your Scooter
Image showing the general location of the charging port on the scooter.
The scooter is fully charged when the charger indicator changes from red to green.
The scooter has charging protection and will automatically stop charging after a full charge. However, it is not recommended to leave it overcharging.
Keep the charging port cover closed when not charging to prevent dust and moisture ingress.
The scooter cannot be turned on during charging for safety reasons.
Technical Specifications
W5 Electric Scooter Specifications
Feature
Specification
Model
W5
Unfolded Size
110 x 49 x 110 cm (43.3 x 19.3 x 43.3 in)
Folded Size
110 x 49 x 46 cm (43.3 x 19.3 x 18.1 in)
Weight
14.2 kg (31.3 lbs)
Battery Capacity
36V 7.8Ah
Motor Power
350W
Tire Diameter
8.5 inch (21.6 cm) Pneumatic (inner and outer) road tires
Range
24–34 km (15-21 miles)
Max Load Capacity
120 kg (264 lbs)
Recommended Age
14+
Operating Temperature
-2°C to 35°C (28.4°F to 95°F)
Charger Input
AC 100-240 V, 50/60 Hz
Charger Output
DC 42 V, 1.5 A
Charging Time
3-5 hours
Waterproof Rating
IPX4
Brakes
Rear: Disc brake + hidden electronic brake
APP Support
Yes
*Note: Range and maximum load capacity are measured under laboratory conditions and may vary based on factors such as rider weight, terrain, wind speed, and riding habits.
Troubleshooting: Error Codes
If you encounter any of the following error codes or other issues, please refer to this table. For persistent problems, contact customer support.
Code
Definition
E10
Communication Fault
E14
Throttle Fault
E15
Brake Lever Fault
E16
Motor Hall Sensor Fault
E50
Over-voltage
Maintenance and Care
Cleaning: Regularly wipe down the scooter with a damp cloth. Do not use high-pressure water jets or corrosive cleaning agents.
Tire Pressure: Check tire pressure regularly to ensure optimal performance and safety. Maintain recommended pressure for pneumatic tires.
Brake Inspection: Periodically check the brake system for wear and proper function. Adjust or replace components as needed.
Storage: Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (around 50-70%) for long-term storage to preserve battery life.
Battery Care: Avoid fully discharging the battery. Charge it regularly, even if not in frequent use, to maintain battery health.
User Tips
For optimal range, ensure tires are properly inflated before each ride.
Utilize the app to monitor your ride data and customize settings for a personalized experience.
Always wear a helmet and appropriate safety gear when riding.
Familiarize yourself with local regulations regarding electric scooter use.
Warranty and Support
For detailed warranty information and customer support, please refer to the official documentation or contact the seller directly.
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.