1. Introduction
Thank you for choosing the ATK A87 Pro Wireless Tri-mode Mechanical Keyboard. This manual provides detailed instructions for setting up, operating, and maintaining your keyboard to ensure optimal performance and longevity. The ATK A87 Pro is an 87-key mechanical keyboard designed for esports and general use, featuring tri-mode connectivity, a large 12000mAh battery, 1ms ultra-low delay, and customizable ARGB lighting.
2. Key Features
- Tri-mode Connectivity: Supports Wired (USB-C), Wireless 2.4G, and Bluetooth connections.
- 87-Key Layout: An 80% distribution layout that saves desk space while retaining essential keys.
- 12000mAh Battery: High-capacity battery with NTC temperature control for extended usage.
- 1ms Ultra-Low Delay: SmartSpeed Wireless technology ensures minimal latency for competitive gaming.
- ARGB Backlighting: 16 million color customizable RGB lighting with music rhythm synchronization.
- Full Key Hot-Plug: Allows for easy replacement of mechanical switches without soldering.
- Gasket Mounted Structure: Customized five-layer fill for enhanced typing feel and sound.
- PBT Keycaps: Durable keycaps for long-term use.
- Adjustable Foot Support: Two-stage foot support for ergonomic typing angles (4.5°, 13°, 17°).
- ATKHUB Software: Full self-developed management software (client/web version) for customization.
3. Package Contents
Please check the package for the following items:
- ATK A87 Pro Mechanical Keyboard
- USB-C Cable
- Wireless 2.4G Receiver
- Keycap Puller
- Switch Puller
- User Manual (this document)
4. Setup Instructions
4.1 Initial Charging
Before first use, it is recommended to fully charge the keyboard. Connect the USB-C cable to the keyboard's port and the other end to a powered USB port on your computer or a USB wall adapter. The charging indicator will show the charging status.
4.2 Connecting the Keyboard
The ATK A87 Pro supports three connection modes: Wired, Wireless 2.4G, and Bluetooth.
4.2.1 Wired Mode
- Connect the provided USB-C cable to the keyboard's USB-C port.
- Connect the other end of the USB-C cable to an available USB port on your computer.
- The keyboard will be automatically recognized and ready for use.
4.2.2 Wireless 2.4G Mode
- Locate the 2.4G wireless receiver, typically stored in a hidden compartment on the keyboard (often under the foot brace).
- Plug the 2.4G receiver into an available USB port on your computer.
- Switch the keyboard's mode selector to 2.4G wireless mode. The keyboard should automatically connect to the receiver.
- If connection fails, press and hold the designated pairing key combination (refer to keyboard specific key combinations, usually Fn + 4) until the indicator light flashes, then re-plug the receiver.

Image: Keyboard showing adjustable foot support and the hidden compartment for the 2.4G wireless receiver.
4.2.3 Bluetooth Mode
- Switch the keyboard's mode selector to Bluetooth mode.
- On your computer or device, open Bluetooth settings and search for new devices.
- The keyboard should appear as "ATK A87 Pro" or similar. Select it to pair.
- If prompted for a PIN, enter it and press Enter on the keyboard.
- The keyboard supports connecting to multiple devices, but only one can be actively used at a time. Use Fn + 1/2/3 to switch between paired Bluetooth devices.
4.3 Adjusting Keyboard Angle
The keyboard features two-stage adjustable foot support, allowing you to set the typing angle to 4.5°, 13°, or 17° for ergonomic comfort.

Image: Multi-level keyboard design illustrating the two-stage foot support for different typing angles.
5. Operating Instructions
5.1 Mode Switching
Use the physical switch on the keyboard to toggle between Wired, 2.4G Wireless, and Bluetooth modes.
5.2 ARGB Backlighting Control
The keyboard features dynamic ARGB backlighting. Use the Fn key in combination with other keys to control lighting effects:
- Fn + \|: Cycle through different lighting effects.
- Fn + [{: Decrease brightness.
- Fn + ]}: Increase brightness.
- Fn + ;:: Decrease animation speed.
- Fn + '"': Increase animation speed.
- Fn + Arrow Keys: Change lighting direction or color (depending on effect).
- Fn + Backspace: Toggle ARGB music rhythm mode.

Image: Illustration of the ARGB music rhythm feature, highlighting 16 million colors and high brightness with low power consumption.
5.3 Multimedia and Function Keys
The F1-F12 keys often have secondary multimedia or system functions accessible via the Fn key. Refer to the keycap legends for specific functions (e.g., volume control, media playback).
5.4 ATKHUB Software
Download and install the ATKHUB software from the official ATK website (www.atkgear.com) to customize key assignments, macros, and advanced lighting effects. The software is available as a client or web version.

Image: Screenshot of the ATKHUB software interface, demonstrating configuration options for the keyboard.
6. Maintenance
6.1 Cleaning the Keyboard
- Disconnect the keyboard from your computer before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and chassis.
- For deeper cleaning, use the provided keycap puller to remove keycaps and a brush or compressed air to remove dust and debris from between the switches.
- Do not use harsh chemicals or abrasive materials.
6.2 Battery Care
- The keyboard is equipped with a 12000mAh battery with NTC temperature control for optimal performance and safety.
- Avoid exposing the keyboard to extreme temperatures (hot or cold) as this can affect battery life.
- If storing the keyboard for an extended period, charge it to about 50% to prolong battery health.
6.3 Switch Replacement (Hot-Plug)
The ATK A87 Pro features full key hot-plug sockets, allowing you to easily change mechanical switches without soldering.
- Using the provided switch puller, gently grip the switch and pull it straight up to remove it.
- Align the pins of the new switch with the holes on the PCB.
- Gently push the new switch down until it clicks into place. Ensure the pins are not bent.
7. Troubleshooting
7.1 Keyboard Not Responding
- Wired Mode: Ensure the USB-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
- Wireless 2.4G Mode: Ensure the 2.4G receiver is plugged in and the keyboard is switched to 2.4G mode. Re-pair if necessary (Fn + 4).
- Bluetooth Mode: Ensure Bluetooth is enabled on your device and the keyboard is in Bluetooth mode. Re-pair the device if needed. Check battery level.
7.2 Backlighting Not Working/Incorrect
- Check brightness settings (Fn + [{ / ]}).
- Cycle through lighting effects (Fn + \|) to see if it's an effect issue.
- Ensure the keyboard battery has sufficient charge.
- If using ATKHUB software, check lighting configurations.
7.3 Keys Not Registering or Double-Typing
- This could indicate a faulty switch. Utilize the hot-plug feature to replace the affected switch.
- Ensure the keyboard is clean and free of debris under the keycaps.
7.4 Connectivity Issues (Lag/Disconnections)
- Wireless 2.4G: Ensure the receiver is not obstructed and is close to the keyboard. Avoid interference from other 2.4G devices.
- Bluetooth: Ensure your device's Bluetooth is up to date. Reduce distance between keyboard and device. Avoid environments with high wireless interference.
- Ensure the keyboard battery is adequately charged.
8. Specifications
| Feature | ATK A87 Pro |
|---|---|
| Product Name | ATKA87 three-mode mechanical keyboard |
| Product Model | ATK A87 Pro |
| Keyboard Structure | Customized-level Gasket |
| Internal Fill | Poron sandwich cotton, IXPE10x shaft underpad, PET acoustic cushion, EPDM axle seat cotton, silicone silencer base pad |
| Keyboard Configuration | 87 keys |
| Connection Mode | Wireless 2.4G / Bluetooth / Wired (Tri-mode) |
| Lights | 16 million color RGB support music rhythm |
| Battery Capacity | 12000mAh |
| Latency | 1ms (SmartSpeed Wireless) |
| Keycap Material | PBT |
| Switch Type | Mechanical (Full key hot plug) |
| Compatible Systems | Windows / MacOS |
| Drive Software | ATKHUB (client/web version) |

Image: Detailed comparison table of specifications for ATK A87 and ATK A87 Pro models.
8.1 Available Switch Options
The ATK A87 Pro is compatible with various mechanical switches, including:
- Gaote Wumei Axle Pro: Linear axis, 38 ± 7gf trigger pressure, 3.3mm total travel, 50 million cycles.
- Huannuo Polar Latte Axis: Linear axis, 45gf trigger pressure, 3.6mm total travel, 50 million cycles.
- Xuhua Taiji Axis: Linear axis, 40 ± 5gf trigger pressure, 3.6 ± 0.2mm total travel, 50 million cycles.
- Gaote Ice Snake Axis: Linear axis, 40 ± 10gf trigger pressure, 3.60 ± 0.2mm total travel, 50 million cycles.
- Kaihua Polar Fox Axis: Paragraph axis, 56 + 10gf trigger pressure, 3.6 ± 0.3mm total travel, 80 million cycles.

Image: Visual representation and specifications of different mechanical switch options.
9. User Tips
- Optimize Wireless Performance: For the best wireless experience, especially in 2.4G mode, ensure the receiver is plugged into a front USB port on your PC or a USB hub close to the keyboard to minimize interference.
- Customization: Explore the ATKHUB software to unlock the full potential of your keyboard. You can remap keys, create macros, and design unique lighting profiles.
- Battery Saving: If you're not using the ARGB lighting, turning it off or reducing its brightness can significantly extend battery life.
- Ergonomics: Experiment with the adjustable foot supports to find the most comfortable typing angle for your posture.
10. Warranty and Support
For warranty information, technical support, driver downloads, and other services, please visit the official ATK website at www.atkgear.com. Keep your proof of purchase for any warranty claims.