FOSSIBOT F109S

Contents

FOSSIBOT F109S Rugged Smartphone User Manual

Model: F109S

Introduction

The FOSSIBOT F109S is a rugged smartphone designed for durability and performance in challenging environments. Featuring a powerful Helio G81 Octa-core processor, a large 10600mAh battery, a 50MP AI main camera, and an innovative rear display, it is built to withstand drops, dust, and water while providing a smooth user experience with Android 15. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

FOSSIBOT F109S Rugged Smartphone with key features listed

Image: FOSSIBOT F109S Rugged Smartphone highlighting its main features: Android 15, 50MP Camera, 10600mAh Battery, 6.7" NFC, 24GB RAM+256GB ROM.

Package Contents

Ensure all items are present in your package:

  • F109 S Smartphone
  • Type-C USB Cable
  • 18W Charger
  • User Manual / Warranty Card
  • SIM Card Pin
FOSSIBOT F109S Package Contents including phone, cable, charger, manual, and SIM pin

Image: Contents of the FOSSIBOT F109S retail package.

Setup

1. SIM Card and TF Card Installation

The FOSSIBOT F109S supports Dual SIM Dual Standby, allowing for two Nano SIM cards or one Nano SIM and one TF (microSD) card for expanded storage up to 2TB.

  1. Locate the SIM card tray on the side of the device.
  2. Insert the provided SIM card pin into the small hole next to the tray to eject it.
  3. Carefully place your Nano SIM card(s) and/or TF card into the designated slots on the tray. Ensure the cards are correctly oriented.
  4. Gently push the tray back into the phone until it clicks into place.
Diagram showing dual SIM and TF card slots on the FOSSIBOT F109S

Image: Illustration of the Dual SIM and TF card tray, supporting Nano SIM + Nano SIM or Nano SIM + TF card configurations.

2. Initial Charging

Before first use, it is recommended to fully charge your FOSSIBOT F109S. The device supports 18W fast charging.

  1. Connect the Type-C USB cable to the charging port on your phone.
  2. Connect the other end of the USB cable to the provided 18W charger.
  3. Plug the charger into a power outlet.
  4. The screen will indicate charging status. A full charge from 0% to 100% typically takes approximately 4 hours, while 0% to 70% takes about 2 hours.
FOSSIBOT F109S charging with 18W fast charger, showing charge times

Image: FOSSIBOT F109S connected to an 18W fast charger, illustrating charging speed (0-70% in 2H, 0-100% in 4H).

3. Powering On/Off

  • To Power On: Press and hold the Power button (usually on the side) until the FOSSIBOT logo appears.
  • To Power Off: Press and hold the Power button until the power options appear on the screen, then select "Power off".

4. Biometric Security Setup (Fingerprint & Face ID)

For secure and effortless access, you can set up fingerprint recognition and Face ID.

  1. Go to "Settings" > "Security & Privacy" > "Device unlock".
  2. Follow the on-screen instructions to register your fingerprints and/or set up Face ID using the front camera.
FOSSIBOT F109S showing fingerprint sensor on the side and front camera for Face ID

Image: Side view of FOSSIBOT F109S highlighting the fingerprint sensor and the front camera for Face ID.

5. Custom Button Configuration

The F109S features a customizable button for quick access to your favorite apps or functions.

  1. Navigate to "Settings" > "Smart Assistant" > "Custom Button" (or similar).
  2. Assign single press, double press, or long press actions to launch specific applications or functions.

Image: Side view of FOSSIBOT F109S showing the custom button. (Refer to image S4515184e7074408290fae4ab66ff4c68g.jpg for visual context)

Operating Instructions

1. Android 15 Operating System

Your FOSSIBOT F109S runs on Android 15, offering a smooth and user-friendly interface with enhanced privacy protection, better personalization options, and full access to Google Play services.

Screenshots of Android 15 OS interface on FOSSIBOT F109S

Image: Various screens demonstrating the Android 15 OS interface on the FOSSIBOT F109S.

2. Innovative Rear Display

The F109S features an innovative 1.32" secondary touch screen on the back, providing rapid access to information and notifications while conserving power.

  • Rapid Access: View time, notifications, and incoming calls without activating the main screen.
  • Customized Dials: Personalize the rear display with various dial designs.
  • Power Saving: Utilize the sub-screen for essential information to reduce main screen usage and extend battery life by up to 25%.
  • Selfies: Take high-quality selfies using the 50MP rear camera with the rear display as a viewfinder.
FOSSIBOT F109S rear display showing various functions like recorder, timer, notifications, and music controls

Image: The FOSSIBOT F109S rear display showcasing its multi-functional capabilities including recorder, timer, notifications, and music controls.

Person using FOSSIBOT F109S outdoors, showing the rear display with a compass and battery saving feature

Image: Outdoor usage of the FOSSIBOT F109S, demonstrating the low-power sub-screen with a compass and battery consumption reduction.

3. Camera Functions

The F109S is equipped with a versatile camera system:

  • 50MP AI Main Camera: Capture high-resolution photos with an f/1.8 aperture, suitable for various lighting conditions. Features include Beauty Mode, Night Mode, Bokeh, Pro Mode, and Scan.
  • 5MP Macro Camera: Explore the microscopic world and capture detailed close-up shots.
  • 16MP Front Camera: Take clear selfies and video calls.
Examples of photos taken with FOSSIBOT F109S 50MP main camera (landscape) and 16MP front camera (selfie)

Image: Sample photos from the 50MP AI Main Camera (landscape) and 16MP Front Camera (selfie) of the FOSSIBOT F109S.

Macro shot of an ant on a water droplet taken with FOSSIBOT F109S 5MP macro camera

Image: A detailed macro photograph of an ant on a water droplet, demonstrating the capability of the 5MP Macro Camera.

4. NFC Functionality

The F109S supports Multi-function NFC, allowing for seamless contactless payments, data sharing, and quick connections with compatible devices.

  • Contactless Payments: Use your phone for secure payments at NFC-enabled terminals.
  • Data Exchange: Share files, contacts, and other data by tapping your phone with another NFC-enabled device.
FOSSIBOT F109S being used for contactless payment via NFC

Image: FOSSIBOT F109S demonstrating contactless payment using its NFC feature.

5. Network Connectivity

The FOSSIBOT F109S supports global network bands for worldwide use. Ensure your SIM card is compatible with the supported bands in your region.

Network TypeSupported Bands
GSMB2/B3/B5/B8
WCDMAB1/B2/B4/B5/B8
FDDB1/B2/B3/B4/B5/B7/B8/B12/B17/B19/B20/B28AB/B66
TDDB38/40/41
FOSSIBOT F109S displaying network signal and listing global network bands

Image: FOSSIBOT F109S showing network signal strength and a list of supported global network bands.

Maintenance

1. Ruggedness and Protection

The FOSSIBOT F109S is built with a military-grade design (MIL-STD-810H) and boasts IP68/IP69K ratings, making it highly resistant to water, dust, and drops.

  • Waterproof: Can withstand immersion in up to 1.5 meters of water for 30 minutes. Also resistant to high-temperature and high-pressure water flow.
  • Dustproof: 360° all-round dust-proof design ensures functionality in dusty environments.
  • Drop-proof: Designed to resist drops from up to 1.5 meters.
FOSSIBOT F109S in a rocky outdoor environment, emphasizing its military-grade rugged design

Image: FOSSIBOT F109S in a rugged outdoor setting, illustrating its military-grade design and 1.5m drop resistance.

FOSSIBOT F109S submerged in water and covered in sand, demonstrating IP68/IP69K waterproof and dustproof features

Image: FOSSIBOT F109S submerged in water and covered in sand, showcasing its IP68/IP69K waterproof (1.5m underwater for 30 mins) and 360° all-round dust-proof capabilities.

2. Cleaning and Care

  • To clean the device, wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials.
  • If the phone has been exposed to saltwater, rinse it thoroughly with fresh water and dry it completely before charging or opening any ports.
  • Ensure all port covers are securely closed to maintain water and dust resistance.

3. Battery Care

The F109S is equipped with a large 10600mAh battery. To maximize battery lifespan:

  • Avoid extreme temperatures.
  • Use the original charger and cable provided.
  • Do not let the battery completely drain frequently.
  • For long-term storage, charge the battery to around 50% and store in a cool, dry place.
FOSSIBOT F109S with a visual representation of its 10600mAh battery and estimated usage times

Image: FOSSIBOT F109S illustrating its 10600mAh battery capacity and estimated usage times for standby, HD video, calling, gaming, navigation, and music.

Troubleshooting

  • Device not turning on: Ensure the battery is charged. Connect to the charger and wait a few minutes before attempting to power on again.
  • Screen unresponsive: Try restarting the device by holding the power button for an extended period (e.g., 10-15 seconds) until it reboots.
  • Network connectivity issues: Check if your SIM card is properly inserted. Verify that mobile data is enabled in settings. If issues persist, contact your network provider.
  • Apps crashing/freezing: Close background applications. Clear the cache of the problematic app (Settings > Apps > [App Name] > Storage > Clear Cache). If the issue continues, consider reinstalling the app.
  • Slow performance: Regularly clear unnecessary files and cache. Consider uninstalling unused apps.

Specifications

FeatureSpecification
BrandFOSSIBOT
ModelF109S
Operating SystemAndroid 15
ProcessorHelio G81 Octa-core Chip
RAMUp to 24GB (6GB + 18GB Extended)
ROM256GB
Expandable StorageUp to 2TB (TF Card Supported)
Battery Capacity10600mAh (Not Detachable)
Charging18W Fast Charging (Type-C Interface)
Main Display Size6.745" HD+ Normal Screen
Main Display Resolution1612x720
Aspect Ratio20:9
Screen-to-body Ratio89%
Peak Brightness450 nits
Rear Display1.32" Secondary Touch Screen
Rear Camera50MP AI Main Camera + 5MP Macro Camera
Front Camera16MP
SIM Card Quantity2 SIM Card (Nano SIM)
Biometrics TechnologyFingerprint Recognition, Face Recognition
NFCYes
3.5mm Headphone PortNo
Wireless ChargingNo
Cellular Networks2G, 3G, 4G
DurabilityIP68, IP69K, MIL-STD-810H (1.5m Drop-resistance, 1.5m Underwater 30Mins, 360° Dust-proof)
CertificationCE
Supported LanguagesArabic, Polish, German, Russian, French, Korean, Norwegian, Portuguese, Japanese, Turkish, Spanish, Italian, English
FOSSIBOT F109S highlighting key specifications like processor, camera, battery, and durability ratings

Image: Overview of FOSSIBOT F109S key specifications including Helio G81, 50MP camera, 10600mAh battery, Android 15, NFC, IP68/IP69K, and MIL-STD-810H.

User Tips

  • Maximize Battery Life: Utilize the low-power rear display for quick checks of time and notifications to significantly extend your phone's endurance, especially during outdoor activities.
  • Custom Button for Emergencies: Program the custom button for quick access to a flashlight, emergency contact, or a frequently used app when you're on the go.
  • Ruggedness in Action: While the phone is highly durable, always ensure port covers are sealed when exposing it to water or dust to maintain its IP ratings.
  • Storage Expansion: If you need more space for photos, videos, or apps, consider adding a TF card up to 2TB.

Warranty and Support

Your FOSSIBOT F109S comes with a standard manufacturer's warranty. Please refer to the "User Manual / Warranty Card" included in your package for detailed warranty terms, conditions, and contact information for customer support.

For further assistance, you may also visit the official FOSSIBOT support website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.