1. Introduction
The Eyoyo EY-022 is a versatile 2D Bluetooth barcode scanner designed for seamless integration with mobile phones and other Bluetooth-enabled devices. Its unique back clip-on design allows it to be easily attached to smartphones, transforming them into efficient scanning solutions. This manual provides essential information for the safe and effective use of your EY-022 scanner.
2. Safety & Warnings
Important Safety Information:
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Avoid exposing the device to extreme temperatures or moisture. Doing so may damage the device and void the warranty. It is made of battery and plastic and has sensitive electronic components inside.
- Do not leave the device in an outdoor car for a long time, as high temperatures may cause the camera battery to expand or explode.
- Batteries should be recycled or disposed of separately from household waste and according to local environmental laws and guidelines.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
3. Package Contents
Please check the box for the following items:
- 1x Eyoyo EY-022 2D Barcode Scanner
- 1x Charge Cable (USB)
- 1x USB Receiver (for laptop/PC connection)
- 1x User Manual
4. Specifications
| Attribute | Value |
|---|---|
| Product Type | Bar Code Scanner |
| Model Number | EY-022 |
| Brand Name | Eyoyo |
| Scanning Light Source | Laser Light |
| Signal Connection Type | Bluetooth |
| Interface Type | USB |
| Scan Element Type | CMOS |
| Optical Resolution | 300*300 |
| Scan Speed | 100 scans/second |
| Colour Depth | 32 Bit |
| Scan Breadth | A3 |
| Battery Capacity | 1600mAh |
| Charging Time | 1.5 hours |
| Working Time | Up to 7.5 hours |
| Standby Time | 720 hours |
| Phone Width Compatibility | 60mm (2.36 inch) - 110mm (4.33 inch) |
5. Installation & Setup
5.1 Initial Setup
- Before First Use: Remove all protective films from the device.
- Charging: Connect the provided USB cable to a certified 5V power adapter. Ensure the device is fully charged before first use.
5.2 Attaching to a Mobile Phone
The EY-022 scanner features a special back clip-on design that supports mobile phones with a width of 60mm (2.36 inch) to 110mm (4.33 inch).
- Hold the scanner and your phone.
- Gently stretch the scanner's clips outwards.
- Position your phone between the clips and release, ensuring the phone is securely held.
Note:
- Please do not install the scanner where there is a button on your phone.
- Please do not install the scanner where there are protruding decorations on your phone.
- The scanner is designed not to affect your phone's camera when clamped on the back.
6. Operation
6.1 Power On/Off
- To Turn On: Press and hold the power button for 3 seconds.
- To Turn Off: Press and hold the power button until the device powers down.
6.2 Connectivity
The EY-022 supports Bluetooth connectivity, allowing it to communicate with various devices such as smartphones, iPads, and computers. It supports Bluetooth HID, SPP, and BLE modes.
- Bluetooth Connection: The scanner's Bluetooth function turns on automatically upon power-up. Pair it with your device (phone, tablet, or computer) via Bluetooth settings.
- USB Receiver Connection: For devices without Bluetooth or for a more stable connection, use the included USB receiver. Plug the receiver into your computer's USB port. The scanner will automatically connect to the receiver.
6.3 Scanning Modes
The scanner offers three distinct scanning modes:
- Manual Trigger Mode: Press the scanning button to initiate a scan.
- Self-sensing Mode: The scanner automatically reads a barcode once it detects one in its scanning area.
- Continuous Mode: The scanner continuously scans, ideal for high-volume scanning tasks.
Short press the power button to change between scanning modes.
6.4 Scanning Barcodes
The EY-022 features a CMOS sensor capable of easily capturing most 1D and 2D QR barcodes from both paper and digital screens.
- 1D Barcodes Supported: UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13, EAN-14, EAN-128, UCC128, ISBN/ISSN, CODE11, CODE32, CODE39, CODE39 Full ASCII, CODE93, CODE128, cross 25 yards, industrial 25 yards, matrix 25 yards, China Postcode, UK/Plessey, GS1, etc.
- 2D Barcodes Supported: QR Code, DataMatrix, PDF417, Aztec, Hanxin, Micro PDF417.
The scanner can read barcodes even if they are damaged, distorted, colorful, fuzzy, or reflective.
7. Battery & Charging
The EY-022 is equipped with a built-in 1600mAh rechargeable battery.
- Charging Time: Approximately 1.5 hours for a full charge.
- Working Time: Up to 7.5 hours of continuous operation on a full charge.
- Standby Time: Up to 720 hours.
To charge, connect the provided USB cable to the scanner and a 5V power adapter. The charging indicator will show the charging status.
8. Maintenance
- Cleaning: Use a soft, dry cloth to clean the scanner's exterior. Do not use abrasive cleaners or solvents.
- Storage: After use, turn off the device and store it in a dry place, away from direct sunlight and extreme temperatures. Keep away from children.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.
9. Troubleshooting
- Scanner not turning on: Ensure the battery is charged. Connect to a power source and try again.
- Scanner not connecting via Bluetooth: Make sure Bluetooth is enabled on your host device. Ensure the scanner is in pairing mode (if applicable, refer to the full PDF manual for specific pairing instructions). Try unpairing and re-pairing the device.
- Scanner not connecting via USB receiver: Ensure the USB receiver is properly plugged into your computer. Try a different USB port.
- Unable to scan barcodes: Check if the scanner is powered on and in the correct scanning mode. Ensure the barcode is clean and well-lit. Verify the barcode type is supported by the scanner.
- Poor scanning performance: Ensure the scanning window is clean. Adjust the distance and angle between the scanner and the barcode.
10. User Tips
- For optimal performance with laptops, consider using the included USB receiver for a stable and direct connection, especially if your laptop's Bluetooth is inconsistent.
- When attaching the scanner to your phone, always ensure it's securely clipped to avoid accidental drops.
- Experiment with the different scanning modes (Manual, Self-sensing, Continuous) to find the one that best suits your workflow for various tasks.
11. Compliance Information
The Eyoyo EY-022 complies with the following standards:
- EN 301 489-1 V2.2.3 (2019-11)
- EN 301 489-3 V2.1.1 (2019-03)
- EN 301 489-17 V3.2.4 (2020-09)
- EN 300 328 V2.2.2 (2019-07)
- EN 300 440 V2.2.1 (2018-07)
- EN 62368-1:2014+A11: 2017
- EN 62479: 2010
12. Warranty & Support
12.1 Manufacturer Information
Company Name: ShenZhen Sky Blue Ocean Technology Co., Limited
Full Address: Area A, 2nd Floor, Building E, Zhenbao Industrial Zone, No.38 Industrial Road West, Longhua Street, Longhua District, Shenzhen
12.2 EU Authorized Representative
Company Name: Apex CE Specialists GmbH
Full Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
12.3 Further Assistance
For detailed warranty information, advanced troubleshooting, or specific configuration settings, please refer to the complete user manual available in PDF format. You can access the PDF manual here.
For customer support, you may contact the manufacturer via email at cs@vvavvstore.com.