FMS YK4103 FJ Cool Road Ze

Contents

Yikong YK4103 FJ Cool Road Ze 1/10 Scale RC Crawler Instruction Manual

Model: YK4103 FJ Cool Road Ze | Brand: FMS

1. Introduction

The Yikong YK4103 FJ Cool Road Ze is a 1/10 scale 4WD remote control climbing off-road vehicle designed for enthusiasts and collectors. This Ready-to-Go (RTR) RC crawler comes fully assembled, allowing you to start conquering various terrains right out of the box. It boasts a realistic scale model and is engineered for an immersive off-road experience.

The YK4103 features a robust 313mm metal wheelbase, ensuring stability and durability in challenging conditions. It includes a linked light group with angel headlights, steering lights, and brake lights for enhanced realism. The car shell is made from 1.5mm PC soft shell and is securely mounted using 4 magnets and 2 fixing bolts from the chassis, providing a reliable and convenient attachment method.

Two YK4103 RC cars on a wet road
Two YK4103 RC cars on a wet road, showcasing their realistic design.

2. Safety Information

WARNING: Not suitable for children under 36 months due to small parts.

Lithium Battery Use and Maintenance Guide

It is crucial to charge, discharge, and use lithium batteries in strict accordance with the following precautions. Property damage and personal injury caused by not following these instructions are not the responsibility of the manufacturer.

  • Charger Compatibility: Only use a LiPo special charger for charging lithium polymer (LiPo) batteries. Do not use nickel-cadmium (NiCd), nickel-metal hydride (NiMH), or other battery-specific chargers. Ensure to use the balance connector (white or black XH plug head, 2S three-strand, 3S four-strand, etc.) for balanced charging. Incorrect use can cause the battery to burn and explode.
  • Supervision: Do not charge batteries unattended.
  • Overcharge Prevention: The fully charged voltage of each battery cell must not exceed 4.25V.
  • Charging Environment: Ensure the charging desktop or platform is heat resistant and high temperature resistant. Do not let the battery cell overheat; temperatures above 60°C can cause safety hazards, including burning.
  • Flammable Materials: Do not charge the battery near or directly on flammable materials such as paper, plastic, carpet, vinyl, leather, wood, or inside the model body.
  • Over-discharge Prevention: The voltage of each battery cell should not be less than 3.3V after discharge to prevent damage, bulging, or swelling.
  • Moisture and Heat: Do not place the battery close to liquids or store it in damp places. Keep away from fire sources, open flames, or heaters.
  • Battery Modification: Do not assemble or disassemble the battery without permission. Do not reassemble old battery cores or connect disassembled battery cores with other batteries.
  • Child Safety: Keep batteries out of reach of children.
  • Post-Collision Check: If a collision occurs, remove the battery and carefully check its condition and connectors.
  • Electrolyte Contact: If electrolyte splashes into eyes or onto skin, immediately wash with water and seek medical attention for serious cases.
  • Wiring: Do not arbitrarily disassemble the battery to reorganize or change the wiring.
  • Pre-Use Check: Always check the battery voltage and power before charging or using.
  • Short Circuits: Avoid short circuits (positive and negative reverse).
  • Leakage: Do not directly contact a leaking battery.
  • Charging Temperature: Charge only between 0-45°C.
  • Charging Safety: Use a lithium battery explosion-proof charging bag for charging.
  • Long-Term Storage: If the battery is not used for a long time, charge it to approximately 40% (3.75-3.85V per cell) for optimal storage. This helps protect the battery and prolong its life. Ensure a charge and discharge activation cycle is performed every 3 months to maintain battery stability.
Lithium battery use and maintenance guide
Detailed instructions for safe lithium battery use and maintenance.

3. Product Overview

Key Features:

  • Ready-to-Go (RTR): Fully assembled for immediate use.
  • Realistic Scale Model: 1/10 scale design for an authentic appearance.
  • 4WD Capability: Excellent off-road performance and climbing ability.
  • Linked Light Group: Features angel headlights, steering lights, and brake lights.
  • Durable Construction: Metal and plastic components, 313mm metal wheelbase.
  • Magnetic Body Mounting: Secure car shell attachment with 4 magnets and 2 fixing bolts.
  • Differential Lock: Remotely switchable for synchronous or differential tire rotation, enhancing climbing or cornering.
  • High and Low Gears: Two-speed transmission for varying speed and torque requirements.
  • Advanced Axle Design: Straight bridge design with gearboxes to increase ground clearance and improve passing ability.
  • AxialDIG Wave Box Function: Allows locking of the rear wheel to reduce the turning radius.
  • Transfer Case: Enables switching between four-wheel drive, front-wheel drive, and rear-wheel drive modes.

Package Contents:

The YK4103 FJ Cool Road Ze package typically includes:

  • 1x Yikong YK4103 RC Crawler (Ready-to-Go)
  • 1x Remote Controller (MODE2)
  • 1x Original Box
  • 1x Main Lithium Battery (for the RC car)
  • 1x USB Cable (for charging)
  • 1x Operating Instructions Manual

Note: Additional batteries for the remote controller may be required and are typically not included.

Underside view of YK4103 RC car chassis
Underside view of the YK4103 RC car chassis, showing the motor, transmission, and wiring.
Side view of YK4103 RC car chassis
Side view of the YK4103 RC car chassis without the body shell, showing suspension and electronics.

4. Specifications

AttributeValue
Brand NameFMS
ModelYK4103 FJ Cool Road Ze
Scale1:10
TypeCar (RC Crawler)
MaterialMetal, Plastic
State of AssemblyReady-to-Go
Controller ModeMODE2
Is ElectricLithium Battery
CertificationCE
Recommend Age14+y
OriginMainland China
High-concerned chemicalNone
Package Length69 cm
Package Width30 cm
Package Height30 cm
Package Weight5.5 kg

5. Setup

5.1 Unboxing and Inspection

  1. Carefully remove all components from the packaging.
  2. Verify that all items listed in the 'Package Contents' section are present and undamaged.
  3. Familiarize yourself with the RC car and its components.

5.2 Battery Installation

  1. RC Car Battery: Install the main lithium battery into the designated compartment on the RC car. Ensure it is securely connected and follow all safety guidelines outlined in Section 2.
  2. Remote Controller Batteries: Install the required batteries (not included) into the remote controller. Refer to the remote controller's specific instructions for battery type and orientation.

5.3 Body Shell Mounting

  1. Align the car shell with the chassis. The 4 magnets on each side will help position it correctly.
  2. Once aligned, secure the shell by tightening the 2 fixing bolts from the chassis. This ensures the vehicle does not loosen during operation.

6. Operating Instructions

6.1 Remote Controller (MODE2)

The remote controller operates in MODE2. Familiarize yourself with the controls for steering, throttle, and special functions.

6.2 Driving Functions

Beginner knowledge diagram for RC car functions
Diagram explaining key operational features like differential lock, gears, and drive modes.
  • Differential Lock: The differential lock can be switched via remote control. When locked, the left and right tires rotate synchronously, providing excellent climbing ability, similar to a straight axle. When unlocked (differential speed), the tires can rotate independently, improving cornering ability.
  • High and Low Gears: The vehicle is equipped with a two-speed gear system. Use high gear for faster speeds and lower torque, suitable for general running. Use low gear for slower speeds and greater torque, ideal for climbing and tackling obstacles.
  • Transfer Case: The transfer case allows you to switch between three driving states: four-wheel drive (4WD), front-wheel drive, and rear-wheel drive. Select the appropriate mode based on the terrain and driving conditions.
  • AxialDIG Wave Box Function: This function allows you to lock the rear wheel, which significantly reduces the turning radius, making it easier to maneuver in tight spaces.

6.3 Lighting System

The YK4103 features a linked light group. This includes angel headlights, which illuminate the path, and functional steering and brake lights that respond to your remote control inputs, adding to the realism.

Internal view of RC car's rear light assembly and wiring
Internal view of the RC car's rear light assembly and wiring.

7. Maintenance

7.1 General Cleaning

  • After each use, especially after off-road driving, clean the vehicle to remove dirt, dust, and debris. Use a soft brush or compressed air for hard-to-reach areas.
  • Avoid using harsh chemicals or excessive water directly on electronic components.

7.2 Battery Maintenance

Refer to the detailed 'Lithium Battery Use and Maintenance Guide' in Section 2 for comprehensive battery care instructions. Proper battery maintenance is crucial for longevity and safety.

7.3 Component Inspection

  • Regularly inspect all moving parts, including wheels, suspension, and drivetrain components, for wear or damage.
  • Check all screws and fasteners for tightness. Tighten any loose connections.
  • After any significant impact or collision, thoroughly inspect the vehicle for damage before operating again.

7.4 Storage

  • Store the RC car in a cool, dry place away from direct sunlight and extreme temperatures.
  • Remove batteries from both the RC car and the remote controller if storing for an extended period.
  • For long-term battery storage, ensure LiPo batteries are charged to approximately 40% (3.75-3.85V per cell) as detailed in Section 2.

8. Troubleshooting

8.1 Common Issues and Solutions

  • Vehicle unresponsive: Check battery levels in both the RC car and remote controller. Ensure all connections are secure.
  • Loss of power/speed: Recharge the main battery. Inspect motor and ESC connections.
  • Unusual noises: Inspect gears and drivetrain for debris or damage.
  • Steering issues: Check steering servo connections and linkages. Ensure remote controller trim settings are neutral.

8.2 Tire Behavior (Friendly Reminder)

Friendly reminder about new car tire behavior
Important note regarding initial tire behavior.

When a new car is first used, the tires may appear sticky or filled with sponge, and might exhibit some shaking. This is a normal phenomenon and not a quality problem. It is recommended to run the car on the ground for a short period to allow the tires to settle and any internal sponge to be discarded naturally.

9. User Tips

  • Optimize for Terrain: Utilize the differential lock for maximum traction on steep climbs and unlock it for smoother cornering on less challenging terrain.
  • Gear Selection: Switch to low gear when encountering obstacles or needing more torque for climbing. Use high gear for faster traversal on open ground.
  • Maneuverability: Experiment with the AxialDIG wave box function to lock the rear wheel, significantly reducing your turning radius for navigating tight spots.
  • Drive Modes: Leverage the transfer case to switch between 4WD, front-wheel drive, and rear-wheel drive to adapt to different driving styles and conditions.
  • Battery Storage: For optimal battery health and longevity, always store your lithium batteries at approximately 40% charge (3.75-3.85V per cell) if not using the RC car for an extended period.

10. Warranty and Support

This model is considered a valuable, non-toy product. Warranty service is limited to electronic accessories. If other parts are damaged, replacement accessories will need to be purchased. The duration of the warranty for electronic accessories may vary by brand; please consult customer service for specific details based on the factory's unified policy.

IMPORTANT: This is a highly professional product. Please ensure you follow all instructions carefully. The manufacturer does not support returns for any reason after 7 days of use if the product has been opened. If you have any questions or require professional guidance, please contact customer service first.

Warranty and support information for the RC car
Important warranty and support information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.