Introduction
The SMSL DS20 is a high-performance portable Digital-to-Analog Converter (DAC) and Headphone Amplifier designed to deliver audiophile-grade sound quality in a compact and elegant form factor. Featuring a quad-CS43131 DAC configuration and an XMOS XU-316 USB processor, it supports high-resolution audio formats including PCM up to 32-bit/768kHz and native DSD256. Its fully balanced PLFC headphone amplifier circuit ensures clean and dynamic output for a wide range of headphones. The DS20 offers versatile connectivity with dual USB modes, making it compatible with various devices from PCs and mobile phones to gaming consoles.
Setup Guide
Package Contents
Please ensure all items are present:
- SMSL DS20 Portable DAC & Headphone Amplifier
- USB Cable (Type-C to Type-A)
- User Manual (this document)
Device Overview
Initial Charging
The DS20 has a built-in 6000mAh (22.2Wh) battery. Before first use, it is recommended to fully charge the device. Connect the DS20 to a USB power source (5V=3A, 9V=2A, 12V=1.5A) using the provided USB cable. The charging indicator will show the charging status.
Connecting to a Source Device
- Connect the DS20 to your source device (PC, smartphone, gaming console) using the appropriate USB cable.
- The DS20 supports dual USB modes: USB 2.0 for high-resolution audio on PCs and mobile devices, and USB 1.1 for plug-and-play compatibility with gaming consoles like PS5 and Nintendo Switch.
- For PC/Mac/Linux/Android/iOS devices, the DS20 will typically be recognized automatically. For Windows, drivers may be required for optimal performance (check SMSL's official website for the latest drivers).
- For SONY PS4/PS5 and Nintendo Switch, the USB 1.1 mode allows for driver-free operation.
Connecting Headphones
Plug your headphones into either the 3.5mm single-ended headphone output or the 4.4mm balanced headphone output on the top panel of the DS20.
Operating Instructions
Power On/Off
- Power On: Press and hold the power button (labeled '2' in the device overview image) for a few seconds until the device powers on.
- Power Off: Press and hold the power button for a few seconds to completely power off the device.
Volume Control
Use the rotary knob (labeled '1' in the device overview image) to adjust the output volume. Rotate clockwise to increase volume and counter-clockwise to decrease volume.
USB Mode Selection
The function buttons (part of '1' in the device overview image, typically short presses on the rotary knob or adjacent buttons) allow you to switch between USB 1.1 and USB 2.0 modes. Refer to the device's display or indicator lights to confirm the active mode.
- USB 2.0: Recommended for high-fidelity audio playback on computers and mobile devices that support USB Audio Class 2.0, enabling PCM up to 32-bit/768kHz and DSD256.
- USB 1.1: Ideal for gaming consoles (PS5, Nintendo Switch) or older devices that require USB Audio Class 1.0 for plug-and-play compatibility without drivers.
Playback
Once connected and powered on, the DS20 will act as your audio output device. Select it as the default audio output in your operating system or application settings. Begin playing your desired audio content.
Maintenance
Cleaning
Wipe the device with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the finish or internal components.
Battery Care
- Avoid fully discharging the battery frequently.
- Store the device in a cool, dry place when not in use for extended periods.
- Charge the device periodically if stored for a long time to prevent deep discharge.
General Handling
The DS20 features a durable all-metal chassis and magnetic backplate. However, avoid dropping the device or exposing it to extreme temperatures, humidity, or direct sunlight.
Troubleshooting
- No Sound Output:
- Ensure the DS20 is powered on and fully charged.
- Check that headphones are securely plugged into the correct output jack.
- Verify that the volume is not set to minimum or muted on both the DS20 and the source device.
- Confirm the DS20 is selected as the default audio output device in your operating system settings.
- Try switching between USB 1.1 and USB 2.0 modes, especially if connecting to a gaming console or if experiencing compatibility issues.
- Test with different headphones and source devices to isolate the problem.
- Device Not Recognized by Computer/Phone:
- Ensure the USB cable is securely connected. Try a different USB port or cable.
- Restart both the DS20 and the source device.
- For Windows PCs, check if specific drivers are needed and install them from the SMSL website.
- Try switching USB modes on the DS20.
- Poor Sound Quality (Distortion, Noise):
- Ensure the audio source file is of good quality.
- Check for loose connections.
- Reduce the volume if distortion occurs at high levels.
- Ensure the correct USB mode is selected for your source device and audio format.
- Avoid placing the DS20 near strong electromagnetic interference sources.
Specifications
| Feature | Detail |
|---|---|
| DAC Chip | Quad CS43131 |
| USB Processor | XMOS XU-316 (3rd Gen) |
| USB Transmission | Asynchronous |
| Operating Systems | Windows 7/8/8.1/10/11, macOS, Linux, Android, iOS |
| USB Compatibility | SONY PS4 / PS5, Nintendo Switch |
| Bit Depth | 1-bit, 16–32bit |
| PCM Sampling Frequencies | 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz |
| DSD Sampling Frequencies | 2.8224 MHz (DSD64), 5.6448 MHz (DSD128), 11.2896 MHz (DSD256) |
| Inputs | USB Type-C |
| Outputs | 3.5mm Single-Ended Headphone Out, 4.4mm Balanced Headphone Out |
| Output Level (3.5mm) | 3Vrms |
| Output Level (4.4mm) | 6Vrms |
| Output Impedance (HP) | <1Ω (both 3.5mm and 4.4mm) |
| Output Power (16Ω) | 500mW x 2 |
| Output Power (32Ω) | 500mW x 2 |
| Output Power (64Ω) | 350mW x 2 |
| Output Power (150Ω) | 240mW x 2 |
| Output Power (300Ω) | 120mW x 2 |
| Output Power (600Ω) | 60mW x 2 |
| THD+N (Unweighted) | 0.0002% |
| Dynamic Range | Up to 126 dB |
| SNR | Up to 126 dB |
| Battery Capacity | 6000mAh (22.2Wh) |
| Dimensions (W×H×D) | 71mm × 17mm × 118.5mm |
| Weight | 275g |
| Material | Plastic (internal components), Metal (chassis) |
User Tips
- The DS20 delivers clear, clean, and powerful sound, making it suitable for various music genres, including rock and J-pop.
- Its built-in battery prevents excessive drain on your mobile phone's battery, enhancing portability for extended listening sessions.
- While portable, be aware that its size and weight (275g) might be larger than some ultra-compact DACs, so manage expectations regarding its pocketability.
- For optimal sound, ensure you are using high-quality audio files and well-matched headphones.
Warranty & Support
The SMSL DS20 comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact your retailer or the official SMSL customer service. Contact information can typically be found on the SMSL official website.