Introduction
The TYXGOO EC21 4G WiFi Router is a versatile wireless CPE (Customer Premises Equipment) designed to provide high-speed internet access using a 4G SIM card. With support for WiFi 6 and a wireless transmission rate of up to 300Mbps, it offers reliable connectivity for home, office, remote areas, and outdoor use. This manual will guide you through the installation, operation, and maintenance of your EC21 router.
Setup Guide
1. Package Contents
Before you begin, ensure all items are present in your package:
- TYXGOO EC21 4G WiFi Router
- Power Adapter (DC 12V/1A)
- User Manual (this document)
2. Hardware Overview

Detailed diagram of the router's rear interface, showing the DC 12V/1A power input, four 100Mbps LAN ports, a SIM card slot (supports Nano SIM), and the reset button (press for 3 seconds to restore factory settings).
3. SIM Card Installation
- Locate the SIM Card Slot on the rear of the router (refer to Figure 1).
- Insert a Nano SIM card into the slot. Ensure the SIM card is inserted correctly with the gold contacts facing down and the notched corner aligned with the slot's orientation.
- Gently push the SIM card until it clicks into place.
4. Power Connection
- Connect the provided power adapter to the DC 12V/1A power input port on the router (refer to Figure 1).
- Plug the other end of the power adapter into a standard electrical outlet.
- The router will power on automatically. Wait for the indicator lights to stabilize, indicating that the router is ready for use.
5. Initial Network Access
Once powered on, the router will broadcast a default Wi-Fi network (SSID). You can find the default SSID and password printed on a label on the bottom of the router. Connect your devices (smartphones, laptops, etc.) to this Wi-Fi network.
Operating Instructions
1. Connecting Devices
- Wireless Connection: Search for the router's Wi-Fi network (SSID) on your device and enter the Wi-Fi password.
- Wired Connection: Connect an Ethernet cable from one of the router's LAN ports to the Ethernet port on your computer or other network device.
2. Accessing the Web Management Interface
To configure advanced settings, you can access the router's web management interface:
- Ensure your device is connected to the router's Wi-Fi or via an Ethernet cable.
- Open a web browser (e.g., Chrome, Firefox, Edge).
- In the address bar, type the router's default IP address (commonly
192.168.1.1or192.168.0.1) and press Enter. The exact IP address can usually be found on the router's label. - Enter the default username and password (also typically found on the router's label).
- Once logged in, you can change Wi-Fi name (SSID), password, network settings, and monitor 4G signal status.
3. 4G Internet Connectivity
The EC21 router automatically detects and connects to the 4G network via the inserted SIM card. Ensure your SIM card has an active data plan. The router's indicator lights will show the status of the 4G connection.

An illustration demonstrating the EC21 router's WiFi coverage within a home or office environment, emphasizing its 300Mbps wireless speed and the role of its four fixed antennas in providing strong and stable signal penetration.

Visual representation of various application scenarios for the EC21 router, including Home Use, Office Use, Remote Areas Use, and Outdoor Use. Also lists supported frequency bands: FDD LTE (B1/B3/B7/B8/B20), TDD LTE (B38/B40/B41), and WCDMA (B1/B8), applicable in Asia, Africa, and Europe.
Maintenance
1. Firmware Updates
Periodically check the manufacturer's website for firmware updates. Keeping your router's firmware up-to-date ensures optimal performance, security, and access to new features. Firmware updates are typically performed through the web management interface.
2. Cleaning
Clean the router with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays. Ensure the router is powered off and unplugged before cleaning.
3. Factory Reset
If you encounter persistent issues or forget your login credentials, you can restore the router to its factory default settings:
- With the router powered on, locate the 'RST' (Reset) button on the rear panel (refer to Figure 1).
- Using a paperclip or a thin object, press and hold the 'RST' button for approximately 3 seconds.
- Release the button when the indicator lights flash. The router will restart with factory default settings.
Troubleshooting
No Internet Connection
- Check SIM Card: Ensure the Nano SIM card is correctly inserted and has an active data plan.
- Signal Strength: Verify the 4G signal strength indicator on the router. If the signal is weak, try repositioning the router.
- Router Status: Check the router's indicator lights. If any critical lights are off or red, consult the manual or manufacturer's support.
- Reboot: Power off the router, wait 10 seconds, then power it back on.
Slow Internet Speed
- Signal Strength: A weak 4G signal can lead to slow speeds. Try moving the router to an area with better reception.
- Network Congestion: Too many devices connected or heavy network usage can slow down speeds.
- Interference: Other electronic devices or physical obstructions can interfere with Wi-Fi signals.
- Data Plan: Ensure your 4G data plan has sufficient speed and data allowance.
Cannot Connect to Wi-Fi
- Check Password: Ensure you are entering the correct Wi-Fi password.
- Router Range: Make sure your device is within the router's Wi-Fi range.
- Restart Devices: Restart both your router and the device you are trying to connect.
- Factory Reset: If all else fails, perform a factory reset and try connecting with the default Wi-Fi credentials.
Specifications
| Feature | Description |
|---|---|
| Brand Name | TYXGOO |
| Model Name | EC21 |
| Type | Wireless 4G CPE Router |
| Wireless Transmission Rate | 300Mbps |
| Frequency | 2.4 GHz |
| Frequency Band Class | Single-Band |
| Wireless Communication Standard | 802.11n, Wi-Fi 802.11g |
| Standards And Protocols | Wi-Fi 802.11g |
| Antenna Type | Fixed |
| With Modem Function | Yes |
| SIM Card Slot | Supports Nano SIM card only |
| LAN Ports | 4 x 100Mbps LAN ports |
| Power Input | DC 12V/1A (Power adapter included) |
| Recommended Uses | Home |
| Support Mesh | Not Supported |
| Max Connected Devices | Up to 32 devices |
| Supported Frequency Bands | FDD LTE: B1/B3/B7/B8/B20 TDD LTE: B38/B40/B41 WCDMA: B1/B8 |
| Applicable Regions | Asia, Africa, Europe |
| Origin | Mainland China |
User Tips
- Optimal Placement: For the best 4G signal and Wi-Fi coverage, place the router in a central location in your home or office, away from large metal objects, thick walls, and other electronic devices that might cause interference.
- Secure Your Network: Always change the default Wi-Fi name (SSID) and password to a strong, unique combination to protect your network from unauthorized access.
- Regular Reboots: Occasionally restarting your router (once a month, for example) can help clear its memory and improve performance and stability.
- Monitor Data Usage: If you have a limited 4G data plan, monitor your usage through the router's web interface or your mobile carrier's app to avoid exceeding your allowance.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer/manufacturer directly. Keep your proof of purchase for warranty claims.