Product Overview
The JIKONG V19 JK Smart Battery Management System (BMS) is designed for 4S to 24S battery packs, supporting Li-ion, LiFePo4, and LTO battery chemistries. It features active balancing, Bluetooth connectivity, and optional RS485, heating, and CAN communication. This manual provides essential information for the safe and effective use of your JIKONG BMS.
Video: JIKONG BMS Product Overview

Image: Overview of JIKONG BMS components and features.
Setup and Installation
Proper installation is crucial for the safe and optimal performance of your BMS. Please follow these steps carefully.
1. App and Manual Download
- For iOS: Search for "JIKONG BMS" in the Apple App Store.
- For Android: Search for "JK BMS" in the Google Play Store.
- Refer to the official PDF manual for additional detailed instructions: JIKONG BMS User Manual (PDF)
2. Hardware Connection
- Connect the protection board and battery pack according to the provided wiring diagram. Ensure that the last power cord (B+) is connected to the main positive pole of the battery pack.
- The total voltage of the battery pack must be greater than 20V (for Default BMS) or 10V (for 4S BMS) before starting up.

Image: Detailed wiring diagram for connecting the JIKONG BMS to a battery pack.

Image: Another perspective of the BMS wiring diagram.
3. Startup
Use the display activation button or an additional switch to activate the BMS.
4. App Connection
- Turn on GPS and Bluetooth on your mobile phone.
- Ensure your mobile Bluetooth is enabled.
- Open the JIKONG BMS app, click on the top left corner to search for devices.
- Click on the device name to connect. The default password is
1234.

Image: JIKONG BMS mobile application interface for monitoring and control.
5. Initial Parameter Settings
For the first startup, parameters need to be set. The default parameter setting password is 123456. Simply set the number of units (cells) and the battery type (Li-ion, LiFePo4, LTO).
6. Check Battery Status
Once parameters are set, go back to the real-time status page in the app. Check the battery status to ensure no error messages are prompted and normal operation is indicated. In the display, blue typically indicates the highest cell voltage, and red indicates the lowest cell voltage.
Optional Modules and Features
The JIKONG BMS supports various optional modules for enhanced functionality:
- Integrated Display: For direct monitoring of battery parameters.
- Heat Sink: For improved thermal management, especially in high-current applications.
- Bluetooth Module: For wireless communication with the mobile app.
- CAN Communication: For integration into vehicle or industrial systems.
- External Temperature Sensor: For precise temperature monitoring.
- Heating Function: For maintaining optimal battery temperature in cold conditions.
- RS485 Communication: For robust serial communication in various setups.
- External Display Unit: An additional display for monitoring.
- Active Balancing: Ensures cell voltage uniformity for extended battery life.
- Various Ports: The BMS is equipped with multiple ports for different connections.

Image: JIKONG BMS with an integrated display for real-time data.

Image: JIKONG BMS equipped with a heat sink.

Image: JIKONG BMS with its Bluetooth module.

Image: JIKONG BMS featuring a CAN communication port.

Image: JIKONG BMS with an external temperature sensor connected.

Image: JIKONG BMS with its heating function enabled.

Image: How to connect the heating cable to the JIKONG BMS.

Image: JIKONG BMS shown with the heating cable accessory.

Image: Example installation of the heating cable with the JIKONG BMS.

Image: JIKONG BMS with an RS485 communication port.

Image: JIKONG BMS connected to an external display unit.

Image: Illustration of the JIKONG BMS active balancing feature.

Image: Close-up of various ports and connections on the JIKONG BMS.
Operating Instructions
Once the BMS is installed and activated, you can monitor and manage your battery pack using the mobile application.
- Real-time Monitoring: The app provides real-time data on individual cell voltages, total pack voltage, current, temperature, and state of charge.
- Parameter Adjustment: Adjust protection parameters such as overcharge voltage, over-discharge voltage, overcurrent limits, and balancing settings via the app.
- Active Balancing: The active balancing feature works continuously to equalize cell voltages, improving battery performance and longevity.
- Error Notifications: The app will display error messages and warnings if any parameters exceed safe limits, allowing for prompt intervention.
Maintenance
The JIKONG BMS is designed for low maintenance. However, regular checks are recommended:
- Visual Inspection: Periodically inspect all wiring connections for tightness and signs of corrosion or damage.
- Software Updates: Check the app store regularly for any available firmware or app updates to ensure optimal performance and access to new features.
- Environmental Conditions: Ensure the BMS operates within its specified temperature range. If using the heating function, verify its proper operation in cold conditions.
Troubleshooting
If you encounter issues with your JIKONG BMS, refer to the following common problems and solutions:
BMS Does Not Turn On
- Battery Connection: Ensure that the last "B+" line of the cable has been correctly connected to the positive pole of the battery.
- Activation: Start up the BMS after charging. Ensure that the charger voltage is at least 4V greater than the battery pack voltage.
- Charger Output: Check whether the charger has voltage output.

Image: Troubleshooting flowchart for BMS startup problems.
Inaccurate Voltage Readings
Measure the actual total voltage of the battery pack with a multimeter. Then, enter this actual total voltage into the "voltage calibration" setting on the parameter setting page within the app.
Inaccurate Current Readings
- Wire Connection: The B- and P- terminals of the protection board use two 7AWG wires. Both must be connected in parallel; otherwise, it will lead to current errors.
- Current Calibration: Measure the actual current of the battery pack with a clamp meter. Enter this actual current into the "current calibration" setting on the parameter setting page. Higher actual current values during calibration generally lead to higher accuracy.
Inaccurate Capacity Readings
- Initial Estimate: The initial capacity displayed when the protection board is first powered on is an estimate based on monomer voltage and may be inaccurate.
- Calibration Cycle: For accurate capacity calibration, fully discharge the battery pack to its cut-off voltage, then fully charge it without interruption. The capacity will be calibrated during this full charge cycle.

Image: Troubleshooting guide for inaccurate voltage, current, and capacity measurements.
Inconsistent String Number
- Unit Quantity Setting: Check whether the "unit quantity" in the parameter settings within the app is set correctly to match your battery pack's cell count.
- Cable Connection: If there is no voltage reading for two or more strings in the middle of the pack, check whether the acquisition cable has fallen off or is improperly connected.
Specifications
| Feature | Description |
|---|---|
| Brand Name | jikong |
| Type | LIFEPO4 Battery BMS |
| Usage Scenario | Power BMS, 3C Digital BMS |
| Handware or Smart | SMART BMS |
| Balance Function | Active Balanced BMS |
| Charge and Discharge Port | Common Port BMS |
| Charging Current | Up to 300A (model dependent) |
| Function | Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection |
| Certification | CE, RoHS |
| High-concerned chemical | None |
| Origin | Mainland China |
Package Dimensions
- Length: 25 cm
- Width: 15 cm
- Height: 8 cm
- Weight: 0.8 kg

Image: Physical dimensions of the JIKONG BMS.
User Tips
- Always double-check all wiring connections before powering on the BMS to prevent damage.
- Utilize the mobile app's real-time monitoring features to keep track of your battery's health and performance.
- For optimal battery longevity, try to keep cell voltages balanced and avoid consistently pushing the battery to its absolute limits (full charge/discharge).
- If using the heating function, ensure the heating cables are properly insulated and secured to prevent short circuits or overheating.
- Regularly back up your BMS settings if the app allows, especially before performing firmware updates.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or the manufacturer, JIKONG, directly. Keep your purchase records handy when contacting support.
Additional documentation, including a detailed user manual in PDF format, can be found here: JIKONG BMS User Manual (PDF)