CIGMAN CLD-100 Laser Receiver User Manual

1. Introduction

The CIGMAN CLD-100 Laser Receiver is a versatile tool designed to extend the working range and enhance the visibility of compatible CIGMAN line laser levels. It can detect both red and green pulse laser beams, making it ideal for outdoor use or in bright conditions where the laser line might be difficult to see. Featuring three indicator lights, a dual-sided level bubble, and an adjustable beeper, the CLD-100 provides precise optical and sound signals for accurate leveling and alignment tasks.

CIGMAN CLD-100 Laser Receiver with 9V battery — Figure 1: CIGMAN CLD-100 Laser Receiver with included 9V battery.

CIGMAN CLD-100 Laser Receiver highlighting features: 50M Working Distance, 10 Min Auto Shut-off, Suits for Red & Green Beam, Sound Mode Switch — Figure 2: Key features of the CLD-100 Laser Receiver.

2. Package Contents

Please check the package carefully to ensure all items are present and undamaged:

1 x CIGMAN CLD-100 Laser Receiver
1 x Mounted Bracket
1 x 9V Battery
1 x User Manual

Contents of the CIGMAN CLD-100 package including receiver, bracket, battery, and manual — Figure 3: Package contents of the CLD-100 Laser Receiver.

3. Specifications

Category	Detail
Brand	CIGMAN
Type	Laser Receiver
Model	CLD-100
Color	Yellow+Black
Power	9V Battery
Working Frequency	5KHz~10KHz
Wavelength	400-650nm
Product Weight	0.3kg
Package Weight	0.35kg
Package Size (L x W x H)	17 x 8 x 8 cm

Detailed specification table for CIGMAN CLD-100 Laser Receiver — Figure 4: Detailed specifications of the CLD-100.

4. Setup

4.1 Battery Installation

Locate the battery compartment cover on the back of the receiver.
Slide or unclip the cover to open it.
Insert the provided 9V battery, ensuring correct polarity (+/-).
Close the battery compartment cover securely.

4.2 Attaching the Mounted Bracket

The CLD-100 comes with a mounted bracket for easy attachment to a grade rod or other suitable surfaces.

Align the receiver with the bracket.
Secure the receiver to the bracket using the screw mechanism.
Attach the bracket to your desired surface (e.g., grade rod) and tighten the clamp.

Hands attaching the mounting bracket to the CIGMAN CLD-100 Laser Receiver — Figure 5: Attaching the mounted bracket to the receiver.

User attaching the CIGMAN CLD-100 Laser Receiver with bracket to a grade rod outdoors — Figure 6: CLD-100 attached to a grade rod for outdoor use.

4.3 Compatibility Note

IMPORTANT: The CIGMAN CLD-100 laser receiver is NOT compatible with Rotary Laser Levels. It is designed to be used ONLY with CIGMAN line laser levels such as CM701, CM720, CM508, and CM505.

5. Operating Instructions

5.1 Powering On/Off

Press the power button (usually marked with a power symbol) to turn the receiver ON.
Press and hold the power button to turn the receiver OFF.
The receiver features a 10-minute auto shut-off function to conserve battery life if no laser signal is detected.

5.2 Activating Pulse Mode on Laser Level

Before using the CLD-100, ensure your compatible CIGMAN line laser level is set to Pulse Mode. This mode enables the laser receiver to detect the laser beam, especially over longer distances or in bright conditions.

User operating the CIGMAN CLD-100 Laser Receiver with a laser level outdoors — Figure 7: Using the CLD-100 Laser Receiver with a compatible laser level.

5.3 Detecting the Laser Beam

Hold the receiver with the detection window facing the laser level. Move the receiver up or down until the indicator lights and beeper signal the laser line.

Indicator Lights: The CLD-100 has three indicator lights (front, side, and back) to provide clear visual feedback from multiple angles.
- An arrow pointing up indicates the receiver needs to move up.
- An arrow pointing down indicates the receiver needs to move down.
- A horizontal line indicates the receiver is on the datum line.
Audible Beeper: The beeper provides an audible signal. The frequency of the beeps will change as you approach the laser line, becoming a continuous tone when the receiver is centered on the line.
Sound Mode Switch: Press the sound button (usually marked with a speaker symbol) to toggle the audible beeper ON or OFF.

Diagram showing laser receiver indicators: move up, move down, and datum line — Figure 8: Visual indicators for laser line detection.

User holding the CLD-100 Laser Receiver, showing its three side indicators in use — Figure 9: The CLD-100 features 3 side indicators for easy viewing.

5.4 Using the Level Bubbles

The CLD-100 is equipped with dual-sided bubble vials (horizontal and vertical) to help ensure the receiver is perfectly level or plumb when taking measurements.

Check the horizontal bubble vial on the top of the receiver for horizontal alignment.
Check the vertical bubble vial on the side of the receiver for vertical alignment.

Close-up of the dual-sided level bubbles on the CIGMAN CLD-100 Laser Receiver — Figure 10: Dual-sided level bubbles for accurate positioning.

6. Maintenance

Cleaning: Wipe the receiver with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Keep the detection window clean for optimal performance.
Storage: Store the receiver in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the 9V battery to prevent leakage.
Battery Replacement: Replace the 9V battery when the low battery indicator appears or if the receiver's performance degrades.

7. Troubleshooting

Problem	Possible Cause	Solution
Receiver does not turn on.	Dead or incorrectly installed battery.	Check battery polarity; replace with a fresh 9V battery.
Receiver does not detect laser beam.	Laser level not in Pulse Mode. Receiver too far from laser level. Incorrect laser level type (e.g., rotary laser). Detection window is dirty.	Activate Pulse Mode on your CIGMAN line laser level. Reduce distance between receiver and laser level. Ensure you are using a compatible CIGMAN line laser level. Clean the detection window.
Inaccurate readings.	Receiver not level/plumb. Unstable surface.	Use the built-in bubble vials to ensure proper alignment. Place the receiver on a stable surface or securely attach it to a grade rod.
Beeper not working.	Beeper is turned off.	Press the sound button to turn the beeper ON.

8. User Tips

For best results, always ensure your CIGMAN line laser level is in pulse mode when using the CLD-100 receiver.
When working outdoors or in very bright conditions, the receiver significantly improves the visibility and working range of your laser level.
Utilize the dual-sided level bubbles to quickly verify the receiver's orientation for precise measurements.
The adjustable beeper can be turned off in quiet environments or when visual cues are sufficient.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or visit the official CIGMAN website. Keep your purchase receipt as proof of purchase for any warranty claims.

CIGMAN CLD-100