PC Case D33, D28, D25, D35 Series

Contents

D33, D28, D25, D35 Series Metal MATX Mini ITX Small PC Case Instruction Manual

This manual provides detailed instructions for the assembly, operation, and maintenance of your D33, D28, D25, or D35 series small form factor PC case.

1. Introduction

The D-series PC cases are designed for compact and efficient computer builds, supporting various motherboard and power supply configurations. Crafted from durable 430 stainless steel, these cases offer a robust and stylish enclosure for your components. This manual covers the D25, D28, D33, and D35 models, highlighting their unique specifications and assembly considerations.

2. Specifications

Below are the detailed specifications for each model in the D-series. Please refer to the specific model you have purchased.

2.1. D25 Model Specifications

FeatureDetail
Material430 stainless steel
Chassis Dimensions (LWH)248mm x 155mm x 217mm (without foot pads)
Volume8.3L
Net Weight0.85KG (850g) with standard metal side cover
Motherboard SupportITX (170mm x 170mm)
CPU Cooler Height Limit135mm
Video Card SupportLength 246mm, Width 60mm, Height 145mm
2.5" Hard Disk Bays2 (mechanical or solid)
3.5" Hard Disk SlotsNone
Power Supply SupportSFX: 100mm x 125mm x 63.5mm; SFX-L: 110mm x 125mm x 63.5mm
Fan SpaceOne 9CM fan in the rear
Water Cooling SupportNone
Front I/O PortsMetal power button, USB 3.1 Gen2 port, 2-in-1 HD audio port
D25 Case Dimensions and Specifications (Black)
Figure 1: D25 Case Dimensions and Specifications (Black)
D25 White case exterior
Figure 2: D25 White case exterior
D25 Black case exterior
Figure 3: D25 Black case exterior

2.2. D28 Model Specifications

FeatureDetail
Material430 stainless steel
Chassis Dimensions (LWH)275mm x 160mm x 237mm (without foot pads)
Volume10L
Net Weight1.25KG (1250g) with standard metal side cover
Motherboard SupportITX (170mm x 170mm) - MATX (225mm x 205mm)
CPU Cooler Height Limit140mm
Video Card SupportLength 273mm, Width 60mm, Height 145mm (Note: If using ATX PSU, GPU length limited to 185mm)
2.5" Hard Disk Bays2 (mechanical or solid)
3.5" Hard Disk SlotsOne at the bottom (installation not recommended due to heavy impact; use if no 3.5" HDD slot is available)
Power Supply SupportSFX: 100mm x 125mm x 63.5mm; ATX: 140mm x 150mm x 86mm (Note: If using ATX PSU, motherboard limited to 225mm x 183mm)
Fan SpaceOne 9CM fan in the rear
Water Cooling SupportNone
Front I/O PortsMetal power button, USB 3.1 Gen2 port, 2-in-1 HD audio port
D28 Case Dimensions and Specifications (White)
Figure 4: D28 Case Dimensions and Specifications (White)
D28 White case exterior
Figure 5: D28 White case exterior
D28 Black case exterior
Figure 6: D28 Black case exterior

2.3. D33 Model Specifications

FeatureDetail
Material430 stainless steel
Chassis Dimensions (LWH)325mm x 155mm x 278mm (without foot pads)
Volume13.5L
Net Weight1.65KG (1650g) with standard metal side cover
Motherboard SupportITX (170mm x 170mm) - MATX (244mm x 244mm)
CPU Cooler Height Limit140mm
Video Card SupportLength 325mm, Width 60mm, Height 145mm
2.5" Hard Disk Bays2 (mechanical or solid)
3.5" Hard Disk SlotsOne at the bottom (Note: May conflict with 12CM fan or large graphics cards)
Power Supply SupportSFX: 100mm x 125mm x 63.5mm; ATX: 140mm x 150mm x 86mm (Note: If using ATX PSU, motherboard limited to 244mm x 220mm)
Fan Slots2 x 12CM at the top, 3 x 9CM at the bottom, or 1 x 9CM behind 2 x 12CM (some conflicts with hardware)
Water Cooling SupportNone
Front I/O PortsMetal power button, USB 3.1 Gen2 port, 2-in-1 HD audio port
Special NoteBottom 3.5" hard disk and fan may not be installable due to GPU size/height. Base installation on actual situation.
D33 Case Dimensions and Specifications (White)
Figure 7: D33 Case Dimensions and Specifications (White)
D33 White case exterior
Figure 8: D33 White case exterior
D33 Black case exterior
Figure 9: D33 Black case exterior
Internal view of a black D33 case with components installed, showing RGB lighting.
Figure 10: Internal view of a black D33 case with components installed, showing RGB lighting.

2.4. D35 Model Specifications

FeatureDetail
Material430 stainless steel
Chassis Dimensions (LWH)350mm x 160mm x 278mm (without foot pads)
Volume15.5L
Net Weight2.02KG (2020g) with standard metal side cover
Motherboard SupportITX (170mm x 170mm) - MATX (244mm x 244mm)
CPU Cooler Height Limit140mm
Video Card SupportLength 350mm, Width 60mm, Height 145mm
2.5" Hard Disk Bays2 (mechanical or solid)
3.5" Hard Disk SlotsMaximum two slots at the bottom (Note: One slot may conflict with a 12CM fan)
Power Supply SupportATX: 140mm x 150mm x 86mm
Fan Slots2 x 12CM at the top, 3 x 9CM at the bottom, or 1 x 9CM behind 2 x 12CM (some conflicts with hardware)
Water Cooling SupportNone
Front I/O PortsMetal power button, USB 3.1 Gen2 port, 2-in-1 HD audio port
Special NoteBottom 3.5" hard disk and fan may not be installable due to GPU size/height. Base installation on actual situation.
D35 Case Dimensions and Specifications (White)
Figure 11: D35 Case Dimensions and Specifications (White)
D35 White case exterior
Figure 12: D35 White case exterior
D35 Black case exterior
Figure 13: D35 Black case exterior
Internal view of a black D35 case with components installed.
Figure 14: Internal view of a black D35 case with components installed.

3. Setup and Component Installation

Before beginning installation, ensure you have all necessary components and tools (screwdriver, zip ties, etc.). Always handle components with care and consider anti-static precautions.

3.1. Preparing the Case

  1. Unpack the case and remove any protective packaging.
  2. Carefully remove the side panels. Most models use screws on the rear of the chassis.
  3. Identify the motherboard tray, power supply bay, and drive bays.

3.2. Motherboard Installation

  1. Install the I/O shield (if not pre-installed) into the rear opening of the case.
  2. Align the motherboard with the standoffs in the case. Ensure the standoffs match your motherboard's form factor (ITX or MATX).
  3. Secure the motherboard with the appropriate screws.

3.3. CPU Cooler Installation

Install your CPU cooler according to its manufacturer's instructions. Ensure it fits within the specified height limit for your case model (135mm for D25, 140mm for D28/D33/D35).

3.4. Power Supply Installation

  1. Mount your SFX or ATX power supply into its designated bay. Refer to the specifications for compatible PSU sizes for your model.
  2. Secure the power supply with screws from the rear of the case.

3.5. Graphics Card (GPU) Installation

  1. Remove the necessary PCIe slot covers from the rear of the case.
  2. Carefully insert the graphics card into the PCIe slot on your motherboard.
  3. Secure the graphics card with screws. Ensure it fits within the specified length, width, and height limits for your case model.

3.6. Storage Drive Installation

  1. Install 2.5" SSDs/HDDs into the dedicated 2.5" drive bays.
  2. For 3.5" HDDs, refer to your model's specifications. Note potential conflicts with fans or GPUs, especially for D33 and D35 models.
  3. Secure drives with screws.

3.7. Fan Installation

Install case fans in the designated slots (top, bottom, rear) as per your model's specifications. Be mindful of potential conflicts with other hardware, especially for bottom-mounted fans and 3.5" HDDs.

3.8. Cable Management

  1. Connect all necessary power cables from the PSU to the motherboard, GPU, and drives.
  2. Connect front panel cables (power button, USB 3.1 Gen2, HD audio) to the corresponding headers on your motherboard.
  3. Route cables neatly using zip ties or Velcro straps to improve airflow and aesthetics.
Internal view of a black D28 case with components installed.
Figure 15: Internal view of a black D28 case with components installed.
Internal view of a black D33 case with components installed, showing RGB lighting.
Figure 16: Internal view of a black D33 case with components installed, showing RGB lighting.

4. Operating Instructions

4.1. Power On/Off

  1. Ensure all components are correctly installed and cables are connected.
  2. Connect the power cable to the power supply unit and a wall outlet.
  3. Press the metal power button located on the front panel of the case to turn on your PC.
  4. To turn off, use the operating system's shutdown function or press and hold the power button for several seconds for a forced shutdown (not recommended for regular use).

4.2. Front Panel I/O Usage

  • USB 3.1 Gen2 Port: Use for high-speed data transfer with compatible USB devices.
  • 2-in-1 HD Audio Port: Connect your headphones or headset for audio output and microphone input.

5. Maintenance

Regular maintenance helps ensure optimal performance and longevity of your PC components.

5.1. Dust Cleaning

  1. Exterior: Wipe the exterior of the case with a soft, damp cloth. Avoid abrasive cleaners.
  2. Interior: Periodically open the side panels and use compressed air to remove dust from fans, heatsinks, and other components. Pay special attention to any dust filters.

5.2. Fan Inspection

Check case fans and CPU cooler fans for dust buildup or obstructions. Ensure they are spinning freely and quietly. Clean as necessary.

6. Troubleshooting

If you encounter issues, consider the following common troubleshooting steps:

  • PC does not power on:
    • Ensure the power cable is securely connected to the PSU and wall outlet.
    • Check the power switch on the back of the PSU (if applicable) is in the 'ON' position.
    • Verify that the front panel power button cable is correctly connected to the motherboard.
    • Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.
  • No display output:
    • Ensure your monitor is connected to the graphics card (not the motherboard's integrated graphics, unless you are using integrated graphics).
    • Reseat the graphics card in its PCIe slot.
    • Reseat RAM modules.
  • Overheating:
    • Check that all case fans and CPU cooler fans are spinning correctly.
    • Clean any dust buildup from fans and heatsinks.
    • Ensure proper airflow within the case; improve cable management if necessary.
  • Front panel USB/Audio not working:
    • Verify that the USB 3.1 Gen2 and HD Audio cables from the front panel are correctly connected to the corresponding headers on your motherboard.

7. User Tips

  • Plan Your Build: Due to the compact nature of these cases, carefully plan your component selection to ensure compatibility, especially regarding GPU length, CPU cooler height, and PSU size.
  • Cable Management is Key: Good cable management is crucial in small cases for optimal airflow and ease of future maintenance. Utilize any tie-down points available.
  • Test Components Outside the Case: Before fully assembling, consider testing your motherboard, CPU, RAM, and GPU outside the case to quickly identify any faulty components.
  • Mind Drive Bay Conflicts: For models like D33 and D35, be aware that installing a 3.5" HDD at the bottom might conflict with larger graphics cards or bottom-mounted fans. Prioritize based on your needs.
  • Removable Handle: The removable aluminum handle provides portability. Ensure it is securely attached if you plan to transport your PC.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.