Introduction
Thank you for choosing the TESSAN 18-in-1 Multi Socket Power Strip. This power tower is designed to provide a versatile and safe power solution for your home or office, featuring numerous AC outlets and USB charging ports, along with essential safety protections. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.
Product Features
- 18-in-1 Connectivity: Features 12 AC outlets (Schuko type), 4 USB-A ports, and 2 USB-C ports, allowing simultaneous charging of up to 18 devices.
- Space-Saving Tower Design: Vertical tower structure optimizes desk space and helps manage cables efficiently.
- Individual Switches: Four independent switches control specific groups of AC outlets, providing flexible power management and energy saving. Note: The individual switches do not control the USB ports.
- Fast USB Charging: Includes 4 USB-A ports (up to 12W max) and 2 USB-C ports (up to 15W max), with a total USB output of 5V/4.8A (24W).
- Advanced Safety Protection: Equipped with surge protection, overload protection, overcurrent protection, overvoltage protection, short circuit protection, and 750°F heat resistance. Child protection features are also integrated.
- Optimal Plug Arrangement: AC outlets are arranged at a 45° angle to accommodate various plug sizes without blocking adjacent sockets.
- Stable Design: Four rubber feet on the base prevent slipping and ensure stability on surfaces.
- Long Extension Cable: Comes with a 2-meter extension cable for flexible placement.
- Certifications: CE, RoHS compliant.


Setup Instructions
- Unpack: Carefully remove the power strip from its packaging. Inspect for any signs of damage.
- Placement: Place the power strip on a stable, flat surface, such as a desk or floor. Ensure it is away from water, heat sources, and direct sunlight. The four rubber feet on the base provide stability.
- Connect to Wall Outlet: Plug the power strip's 2-meter extension cable into a grounded wall socket. Ensure the wall socket meets the rated voltage and current requirements of the power strip (250V, 10A).
- Indicator Lights: Observe the "Protected" and "Grounded" indicator lights on the base.
- A green "Protected" light indicates that the surge protection is active.
- A red "Grounded" light indicates that the power strip is properly grounded.

Operating Instructions
- Connecting AC Devices: Plug your devices into any of the 12 AC outlets. The 45° angled arrangement allows for larger plugs without obstruction.
- Using USB Ports:
- Connect your USB-A compatible devices to the 4 USB-A ports. Each port provides up to 12W.
- Connect your USB-C compatible devices to the 2 USB-C ports. Each port provides up to 15W.
- Individual Power Switches: The power strip features four individual switches, each controlling a specific set of AC outlets.
- Press a switch to turn on or off the corresponding group of AC outlets. The switch will illuminate when active.
- Use these switches to conserve energy by turning off devices not in use, without needing to unplug them.
- Important Note: The individual switches only control the AC outlets and do NOT affect the power supply to the USB ports. USB ports are always active when the main power is connected.



Maintenance
- Cleaning: Always unplug the power strip from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use for extended periods, unplug the power strip and store it in a cool, dry place away from children and pets.
- Inspection: Periodically inspect the power cord and the unit for any signs of damage, such as frayed wires, cracks, or loose connections. If damage is found, discontinue use immediately and contact customer support.
Safety Precautions
- Do not exceed the maximum rated power of 2500W or rated current of 10A.
- Do not disassemble or modify the power strip.
- Avoid exposing the power strip to water or high humidity.
- Do not use in wet environments.
- Keep out of reach of children.
- Do not use with appliances that draw excessive power, suchs as heaters or air conditioners, to avoid overloading.
Troubleshooting
- No power to outlets/USB ports:
- Ensure the power strip is securely plugged into a working wall outlet.
- Check if the wall outlet itself is receiving power (test with another device).
- Verify that the individual switches for the AC outlets are turned ON.
- Check the overload protection button. If it has popped out, the power strip may have been overloaded. Unplug some devices, then press the button to reset.
- Devices not charging via USB:
- Ensure your USB cable is functional and properly connected to both the power strip and your device.
- Confirm your device is compatible with the USB-A (12W) or USB-C (15W) output.
- Check if the total power draw from all connected USB devices exceeds the maximum total USB output of 24W. If so, disconnect some devices.
- "Protected" indicator light is off:
- If the green "Protected" light is off, it indicates that the surge protection component has been compromised or has reached its end of life after a significant surge. The power strip may still function as an extension cord, but it will no longer provide surge protection. It is recommended to replace the unit for continued surge protection.
- "Grounded" indicator light is off:
- If the red "Grounded" light is off, it means the power strip is not properly grounded. This could be due to a faulty wall outlet or an issue with the power strip itself. Ensure the wall outlet is correctly wired and grounded. If the issue persists, discontinue use and consult a qualified electrician or contact customer support.

Specifications
| Feature | Specification |
|---|---|
| Model Number | GM-JA-EU03-GR |
| Brand Name | TESSAN |
| Type | Extension Socket |
| Outlets Number | 12 (Schuko) |
| USB A Ports | 4 |
| USB C Ports | 2 |
| Rated Power | 2500W |
| Rated Voltage | 250V |
| Rated Current | 10A |
| USB Total Power | 24W |
| Single USB Max Output | 5V 3A |
| Extension Cable Length | 2m |
| Surge Protector | Yes |
| Overload Protection | Yes |
| Sub-control Switch | Yes (4 switches) |
| Master Switch | No |
| Grounding | Standard Grounding |
| Application | Residential / General-Purpose |
| WIFI | No |
| Origin | Mainland China |
| Plug Type | EU |
| Certification | CE, RoHS |
| Package Dimensions (L x W x H) | 25cm x 17cm x 14cm |
| Package Weight | 1.014 kg |
User Tips
- Optimize Space: The tower design is excellent for saving space on crowded desks. Utilize the 45° angled outlets to plug in bulky adapters without blocking other sockets.
- Energy Efficiency: Take advantage of the individual switches to turn off power to specific devices or groups of devices when not in use. This helps reduce standby power consumption.
- Cable Management: The vertical design naturally helps in organizing cables. Consider using cable ties to keep cords tidy around the base of the tower.
- USB Charging Convenience: With dedicated USB-A and USB-C ports, you can charge most mobile devices directly without needing their original power adapters, freeing up AC outlets.
Warranty & Support
TESSAN products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your product, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.