1. Introduction
The ANCEL AD710 is a professional automotive diagnostic tool designed to provide comprehensive diagnostics for various vehicle systems. It offers full OBD2 functions, along with specialized diagnostics for ABS (Anti-lock Braking System), SRS (Supplemental Restraint System), and Engine systems. Additionally, it includes a professional battery testing function and two essential reset services: ABS Bleeding and Electronic Parking Brake (EPB) Reset. The device supports a wide range of vehicles and features lifetime free software updates.
2. Package Contents
Please check the package contents upon receipt to ensure all items are present:
- 1x ANCEL AD710 Host Unit
- 1x Rubber Protective Cover
- 1x OBD Diagnostic Cable
- 1x USB Cable
- 1x User's Manual (this document)
- 1x Alligator Clamps (for battery testing)
- 1x Plastic Box (storage case)
3. Setup and Initial Use
3.1 Powering the Device
The ANCEL AD710 is powered directly from your vehicle's OBDII connector. No external battery or charger is required for basic operation.
3.2 Connecting to the Vehicle
- Locate the vehicle's 16-pin OBDII diagnostic port. This port is usually located under the dashboard on the driver's side.
- Ensure the vehicle's ignition is in the 'OFF' position.
- Connect the OBD Diagnostic Cable to the ANCEL AD710 unit.
- Plug the other end of the OBD Diagnostic Cable into the vehicle's OBDII port.
- Turn the vehicle's ignition to the 'ON' position (engine can be off). The AD710 unit will power on automatically.
3.3 App Download for Bluetooth Mode (Optional)
For utilizing Bluetooth features with your smartphone or tablet:
- iOS Devices: Search for "ANCEL" in the Apple App Store and download the official ANCEL app.
- Android Devices: Search for "ANCEL" in Google Play Store and download the official ANCEL app.
4. Operating Instructions
4.1 General Navigation
The ANCEL AD710 features a user-friendly interface with a 3.5" TFT color display and intuitive buttons:
- OK Button: Confirms selections or enters sub-menus.
- ESC Button: Returns to the previous screen or cancels an operation.
- Directional Buttons (Up/Down/Left/Right): Navigates through menus and options.
- F1 Button: Context-sensitive function button (refer to on-screen prompts).
4.2 Full OBD2 Functions
The AD710 supports all 10 modes of OBDII diagnostics:
- Read Codes: Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) codes.
- Erase Codes: Clears Diagnostic Trouble Codes (DTCs) and resets the Check Engine Light (MIL).
- I/M Readiness: Checks the readiness of the emission monitoring systems.
- Data Stream: Displays live data stream in text or graph format.
- O2 Sensor Test: Retrieves O2 sensor monitor test results.
- On-Board Monitoring: Retrieves test results for emission-related powertrain components and systems.
- EVAP System Test: Initiates a leak test for the vehicle's EVAP system.
- Vehicle Information: Retrieves the Vehicle Identification Number (VIN), Calibration ID (CALID), and Calibration Verification Number (CVN).
- Freeze Frame: Displays a snapshot of operating conditions at the time of an emission-related fault.
4.3 System Diagnostics (ENGINE/ABS/SRS)
The AD710 provides in-depth diagnostics for critical vehicle systems:
- ENGINE Diagnosis: Offers advanced diagnostics, including testing of O2 sensors and EVAP systems. Perform a leak test on your vehicle's EVAP system and monitor the fuel tank's integrity. The O2 sensor test helps fine-tune the air/fuel mixture, improving fuel efficiency and reducing emissions.
- ABS Diagnosis: Quickly identify and resolve ABS-related issues, including sensor faults (such as wheel speed sensors), wiring problems (faulty circuits or connectors within the ABS system), or ABS pump failures (malfunctions in the ECU controlling the ABS). Ensure proper system operation, restore optimal braking performance, and clear any warning lights.
- SRS Diagnosis: Quickly detect issues within the Supplemental Restraint System, such as airbag ECU faults, airbag sensor failures, airbag system plug disconnections or poor contacts, and seat belt sensor failures or system errors. This ensures the SRS is working properly. After repair, reset the system to clear the warning light and restore full safety performance. Note: It cannot reset Airbag crash or transmission codes.
4.4 12V Complete Battery Test
The AD710 supports testing of 6V and 12V lead-acid batteries with Cold Cranking Amps (CCA) ranging from 100 to 2000. This function provides accurate battery health analysis.
- Battery Test: Checks the overall health and charge level of the battery.
- Cranking Test: Analyzes the starting system, including starter motor and ignition switch.
- Charging Test: Evaluates the vehicle's charging system, including the alternator and regulator.
- Review Data: Allows you to view previously recorded test results.
4.5 Reset Services (Lifetime Free)
The AD710 offers two crucial reset functions:
4.5.1 ABS Bleeding
This function exhausts air from the ABS pump to ensure the normal operation of the ABS system.
Notes:
- The vehicle's electronic parking brake (or hand brake) must be released.
- For some specific models (e.g., 2020 Audi Q3), the vehicle hood must be opened.
Procedure:
- Step 1: First Flush Cycle.
- Step 2: Front Bleeding.
- Step 3: Second Flush Cycle.
- Step 4: Rear Bleeding.
4.5.2 EPB (Electronic Parking Brake) Replace Brake Pads
After replacing the brake pads, the service life of the new brake pads needs to be reset.
Notes:
- The vehicle must have an electronic handbrake to enable the EPB function.
- The vehicle must be parked in a stable area, and the battery must be sufficiently charged.
- For some specific models (e.g., 2020 Audi Q3), the vehicle hood must be opened.
4.6 DTC Lookup
The DTC Lookup function allows you to view the definition of a fault code directly on the device screen, eliminating the need to search online. It shows the code and its meaning.
4.7 DLC PIN Test
This feature detects the voltage of the 16-pin DLC (Data Link Connector) diagnosis, helping to identify potential wiring or power issues with the OBDII port.
The test displays voltage readings for various pins, including:
- Chassis ground
- Signal ground
- SAEJ1850 bus+
- SAEJ1850 bus-
- ISO 15765-4 (CAN high)
- ISO9141 (K-line)
- ISO9141 (L-line)
- Battery Power (+12V)
- ISO 15765-4 (CAN LOW)
5. Maintenance
5.1 Software Updates (Lifetime Free)
The ANCEL AD710 offers lifetime free software updates to ensure compatibility with new vehicle models and to introduce new features. No additional cost is required for updates.
There are two methods for updating the device software:
- USB Mode Upgrade: Connect the device to a computer using the provided USB cable and follow the instructions on the ANCEL website for software updates. This method is generally faster.
- WiFi Mode Upgrade: Connect the device to a stable Wi-Fi network and follow the on-screen prompts for over-the-air updates.
5.2 Cleaning and Storage
- Clean the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Store the device in its plastic box in a dry, cool environment, away from direct sunlight and extreme temperatures.
- Keep the OBD diagnostic cable and alligator clamps free from dirt and damage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Loose OBDII connection; Vehicle ignition off; Vehicle's OBDII port issue. | Ensure the OBDII cable is securely connected. Turn vehicle ignition to 'ON'. Check vehicle's OBDII port for damage or power. |
| Cannot connect to vehicle ECU | Vehicle not OBDII compliant; Incorrect protocol; Faulty vehicle ECU. | Verify vehicle is OBDII compliant (1996 US-based, 2000 EU-based, Asian cars). Ensure correct protocol is selected if applicable (usually auto-detected). Consult a mechanic if ECU is suspected. |
| ABS Bleeding/EPB Reset fails | Vehicle conditions not met; Insufficient battery charge; Incompatible vehicle. | Ensure electronic parking brake is released (for ABS Bleeding). Ensure vehicle is stable and battery is sufficiently charged (for EPB Reset). Check compatibility for specific vehicle models. |
| Bluetooth connection issues | App not installed; Bluetooth not enabled; Device not paired. | Download the official ANCEL app. Enable Bluetooth on your mobile device. Follow app instructions to pair with the AD710. |
| Software update failure | Unstable internet/USB connection; Insufficient storage. | Ensure a stable internet connection for WiFi updates or a secure USB connection for PC updates. Check available storage on the device. |
7. Specifications
| Feature | Detail |
|---|---|
| Product Model | ANCEL AD710 |
| Item Type | ABS SRS Engine System Diagnostic Tool + Battery Tester |
| Display | Backlit, 3.5" TFT color display |
| Operating Voltage | 8V-18V |
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Weight | 1.02 KG |
| Dimensions (L x W x H) | 23 cm x 7 cm x 17 cm |
| Supported Protocols | KWP2000, ISO9141, J1850 VPW, J1850 PWM, CAN |
| Supported Languages | German, English, Spanish, French, Chinese |
| Battery Test Range | 6V and 12V lead-acid batteries, 100-2000 CCA |
| External Testing Certification | CE |
| Software Update | Yes, Lifetime Free (USB & WiFi) |
| Connectivity | OBDII, USB, Bluetooth (for iOS/Android app) |
8. Warranty and Support
8.1 Warranty Period
The ANCEL AD710 comes with a 12-month warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use.
8.2 Lifetime Free Software Updates
Benefit from lifetime free software updates, ensuring your device remains current with the latest vehicle models and diagnostic capabilities.
8.3 Customer Support
For technical assistance, troubleshooting, or any inquiries regarding your ANCEL AD710, please contact ANCEL's 24/7 online customer service. Refer to the product packaging or ANCEL's official website for contact details.
9. User Tips
- Vehicle Compatibility: Always verify the compatibility of the ANCEL AD710 with your specific vehicle make, model, and year before attempting diagnostics, especially for advanced functions like ABS Bleeding and EPB Reset.
- Battery Condition for Resets: For functions such as EPB Reset, ensure your vehicle's battery is sufficiently charged to prevent interruptions during the procedure.
- App for Enhanced Features: Download the official ANCEL app on your iOS or Android device to utilize the Bluetooth mode for additional functionalities and convenience.
- Understanding DTCs: Use the built-in DTC Lookup feature to quickly understand fault codes without needing external resources.
- Regular Updates: Take advantage of the lifetime free software updates to keep your tool's firmware and vehicle database current.
