1. Product Overview
The Eigotrav PD-270 is a versatile 5-in-1 portable device designed for automotive emergencies and outdoor use. It functions as a powerful car jump starter, a 150PSI digital air compressor, a portable power bank, and features a multi-mode LED flashlight. With a 12000mAh high-capacity lithium polymer battery and 6000A peak current, it can jump start a wide range of 12V vehicles.
2. Package Contents
Please check the package for the following items:
- 1 x Eigotrav PD-270 Jump Starter Lithium Battery
- 1 x Intelligent Battery Clamp (Jumper Cable)
- 1 x Air Hose
- 1 x Micro USB Cable
- 4 x Air Nozzles
- 1 x Carrying Case
- 1 x User Manual
3. Device Layout and Features
Familiarize yourself with the different parts of your Eigotrav PD-270:
- Air Outlet: For connecting the air hose for inflation.
- Air Hose: Flexible hose for connecting to tires and other inflatables.
- LED Light: Multi-mode flashlight (Lighting, SOS, Strobe).
- Input/Output Ports: USB ports for charging the device and external devices.
- Display: LCD screen showing operating status, battery level, and pressure readings.
- Starter Clip Port: Connection point for the intelligent battery clamp.
3.1 Air Nozzle Storage
The device includes a convenient storage compartment for the various air nozzles.
4. Initial Setup and Charging
Before first use, ensure the Eigotrav PD-270 is fully charged. Connect the Micro USB cable to the input port and a suitable USB power adapter (not included). The LCD display will indicate the charging status.
Important: Ensure the power is not below 50% before attempting to jump start a vehicle.
5. Operating Instructions
5.1 Jump Starting a Vehicle
The Eigotrav PD-270 can jump start 12V vehicles with petrol engines up to 7.5L and diesel engines up to 6.0L. This includes cars, SUVs, ATVs, motorcycles, motorboats, lawn mowers, tractors, trailers, and snowmobiles.
- Ensure the jump starter's battery level is above 50%.
- Connect the intelligent battery clamp to the jump starter's starter clip port.
- Connect the red (+) clamp to the positive terminal of the vehicle's battery.
- Connect the black (-) clamp to the negative terminal of the vehicle's battery.
- If the intelligent clamp indicates a correct connection (e.g., green light), turn on the jump starter's power switch.
- Start your vehicle.
- Once the vehicle starts, immediately remove the intelligent battery clamp from the vehicle battery, then disconnect it from the jump starter.
Safety Precautions for Jump Starting:
- Never connect the black clamp to the red clamp.
- If the positive and negative polarity of the smart clip is reversed, an alarm will sound. Correct the connection immediately.
- Do not use the jump starter to start the vehicle continuously. Allow at least 30 seconds of rest between attempts.
- Do NOT jump start your car if the jump starter gets too hot.
- Not suitable for vehicles with engine displacement larger than the recommendation.
5.2 Using the Air Compressor
The built-in air compressor has a maximum pressure of 150 PSI for inflating tires and other items.
- Connect the air hose to the air outlet on the jump starter.
- Select the appropriate air nozzle for the item you wish to inflate and attach it to the air hose.
- Connect the air hose to the item (e.g., tire valve).
- Turn on the air compressor function. The LCD display will show the current pressure.
- Set the desired pressure using the controls.
- Start inflation. The compressor will automatically stop when the set pressure is reached.
- Disconnect the air hose and store the nozzles.
The air compressor is suitable for various items with recommended pressure ranges:
- Balls: 4-16 PSI
- Bicycles: 30-65 PSI
- Motorcycles: 1.8-3.0 Bar
- Cars: 1.8-3.5 Bar
5.3 Using as a Power Bank
The Eigotrav PD-270 features USB output ports (5V/2.1A) to charge your electronic devices.
- Connect your device's USB charging cable to the USB output port on the jump starter.
- The jump starter will begin charging your device.
5.4 Using the LED Flashlight
The built-in LED flashlight has three modes for various situations:
- Lighting: Standard illumination.
- Strobe: Flashing light for signaling or disorientation.
- SOS: Morse code signal for emergency situations.
Refer to the device controls to cycle through the flashlight modes.
6. Maintenance
- Charging Cycle: It is recommended to perform a complete discharge/charge cycle at least every three months to maintain battery health.
- Storage: Store the device in a cool, dry place within the recommended operating temperature range (-20 °C to +85 °C).
- Cleaning: Wipe the device with a dry, soft cloth. Do not use harsh chemicals or immerse in water.
- Heat Management: Do NOT charge the product when it feels hot to the touch, such as right after jump starting a car.
7. Troubleshooting
The Eigotrav PD-270 features an Intelligent Protection System to ensure safe operation. The LCD display will show operating status, battery level, and potential malfunctions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not start after jump attempt. |
|
|
| Air compressor not inflating or showing incorrect pressure. |
|
|
| Device feels hot during or after use/charging. | Overuse or high ambient temperature. | Allow the device to cool down completely before further use or charging. The honeycomb heat dissipation system helps manage temperature. |
Integrated Safety Protection Functions:
- Spark Proof Protection
- Overload Protection
- Reverse Charge Protection
- Overcharge Protection
- AI Software Monitoring
- Short Circuit Protection
- Reverse Polarity Protection
- Over Voltage Protection
- Over Current Protection
- High and Low Temperature Protection
8. Specifications
| Feature | Specification |
|---|---|
| Model No. | PD-270 |
| Color | Silver Black |
| Material | Lithium Polymer Battery |
| Dimensions | 184 x 106 x 46 mm |
| Weight | 1.34 kg |
| Battery Voltage | 12V |
| Battery Capacity | 12000 mAh (3.7 V) |
| Rated Capacity | 44.4 Wh |
| Constant Starting Current | 400A |
| Peak Starting Current | 6000A |
| Cylinder Diameter (Air Compressor) | 19 mm |
| Cylinder Rated Power (Air Compressor) | 120 W |
| Inflation Pressure (MAX) | 150 PSI |
| Input | 5V-2A (current range 0.5A-2A) |
| USB Output | 5V-2.1A |
| Quick Charge Protocol | Supports Quick Charge 3.0 |
| Gasoline Engine Compatibility | Up to 7.5 Liters |
| Diesel Engine Compatibility | Up to 6.0 Liters |
| Compatible Battery Types | Lead-acid, wet, gel, MF, EFB, AGM batteries |
| Operating Environment Temperature | -20 °C to +85 °C (-4°F to 185°F) |
9. User Tips
- Always ensure the jump starter is adequately charged (above 50%) before attempting to jump start a vehicle for optimal performance.
- For prolonged battery life, perform a full discharge and recharge cycle every three months.
- When inflating tires, monitor the LCD display for accurate pressure readings and avoid over-inflation.
- Utilize the LED flashlight's SOS mode in emergency situations to attract attention.
- Store the various air nozzles in the dedicated compartment to prevent loss.
10. Warranty and Support
The Eigotrav PD-270 comes with a 24-month warranty. For any issues or technical assistance, please contact Eigotrav customer service. Our team is committed to providing lifetime professional technical support and will respond to inquiries within 24 hours.