ETENWOLF AIR 3

Contents

ETENWOLF AIR 3 Portable Air Compressor Camping Light

User Manual

Introduction

Thank you for purchasing the Air 3 tiny pump from ETENWOLF. Each product has been carefully tested by our engineers to ensure optimal performance and safety. Before using the device, please read and adhere to the following instructions for maximum performance and security.

Warning!

Please read all safety warnings and all instructions to reduce the risk of electric shock, fire and/or serious injury.

Product Overview

The ETENWOLF AIR 3 is a versatile, ultra-small inflation pump designed for various outdoor activities. It features a powerful 2600mAh lithium battery, high-speed inflation, and a built-in camping light.

ETENWOLF AIR 3 Portable Air Pump

ETENWOLF AIR 3 Portable Air Pump

Key Features:

  • Suitable for mattresses, sleeping mats, self-inflating air cushions, swimming rings, and inflatable swimming pools.
  • 2600mAh lithium battery for extended use.
  • High-speed inflation at 360L/Min @ 0PSI (5.54CFM@0PSI), with a maximum air pressure of 0.58PSI.
  • 100% duty cycle air pump, allowing continuous operation without breaks.
  • 10W PD fast charging capability.
  • Integrated lighting and deflation functions.

Parts Identification:

  1. Hanging ring
  2. Deflation port
  3. Start/pause power button
  4. Battery indicator
  5. Light button
  6. Type-C Charging port
  7. Camping light
  8. Inflation port
Diagram showing the internal airflow and 2X faster inflation speed of the ETENWOLF AIR 3 pump.

The ETENWOLF AIR 3 offers 2X faster inflation speed at 360L/Min.

Hand holding the compact ETENWOLF AIR 3 pump, showing its lightweight and portable design.

Lightweight and compact design for easy portability.

Setup

Package Contents:

  • Air 3 Outdoor inflation pump x1
  • A-C charging cable x1
  • Gas nozzle x5
  • Storage Bag x1
Image showing the package contents of the ETENWOLF AIR 3: pump, USB-C cable, 5 nozzles, and user manual.

All items included in the package.

Nozzles:

The Air 3 pump comes with 5 different nozzles to accommodate various inflatables:

Image showing the ETENWOLF AIR 3 pump with its five different nozzles, suitable for various inflatables like airbeds, swimming pools, and vacuum bags.

Versatile usage scenarios with different nozzles.

Diagram illustrating various valve types and their corresponding nozzles for air mattresses, vacuum storage bags, swimming rings, camping sleeping pads, and inflatable swimming pools.

A variety of valves for different inflatables.

Operating Instructions

Inflation:

  1. Attach the appropriate nozzle clockwise onto the inflation port.
  2. Long-press the Start/pause power button for 2 seconds to activate the pump.
  3. Connect the pump to the object to be inflated and press the Start/pause power button to begin inflation.
  4. Press the Start/pause power button again to stop inflation.
Four-step visual guide for inflating items with the ETENWOLF AIR 3 pump: attach nozzle, long-press power, connect to item, press to stop.

Step-by-step inflation guide.

Note:

  • The air pump requires manual stopping; it will not stop automatically.
  • Always check the allowable pressure of the inflatable item before use. Overinflating may result in object explosion.

Deflation:

  1. Attach the appropriate nozzle clockwise onto the deflation port.
  2. Follow the same steps as inflation (2-4) to deflate the item.

Note:

  • The air pump requires manual stopping; it will not stop automatically.

Adjusting Airflow Speed:

  • Long-press the power button for 2 seconds to turn on the device.
  • Press the power button once to initiate high-speed operation.
  • Within the first 5 seconds of high-speed operation, press the power button a second time to switch to low-speed operation.
  • Press the power button a third time to stop the operation.
  • If the high-speed fan has been operating for more than 5 seconds, pressing the power button will stop the operation immediately.

High speed flow: 13 CFM (Cubic Feet Per Minute) / 360 LM (Liters per Minute)

Low speed flow: 8 CFM (Cubic Feet Per Minute) / 225 LM (Liters per Minute)

Camping Light Function:

Press the light button to turn on the light when the pump is activated. The light has three levels of brightness, a strobe light, and an SOS signal:

  • Level 1: 60 lumens, Lighting Duration: 40 hours (under full charge)
  • Level 2: 200 lumens, Lighting Duration: 10 hours (under full charge)
  • Level 3: 600 lumens, Lighting Duration: 3 hours (under full charge)
  • Strobe light
  • SOS signal

In any active light mode, press and hold the light button for 2 seconds to turn off the light.

Image showing the ETENWOLF AIR 3 pump hanging in a tent, illustrating its use as a camping light with different brightness levels and durations.

More than a pump, also a light: 60, 200, and 600 lumens settings.

Video demonstrating the ETENWOLF AIR 3's inflation, deflation, and lighting capabilities in various outdoor settings.

Maintenance

Battery Charging:

Use a certified charger that provides a voltage of 5V and a maximum charging current of 3A (5V/3A).

Charging time: Approximately 1.5 hours (5V/2A).

Battery Indicator:

  • 0-10% orange flashing
  • 10%-30% orange
  • 30%-100% white

While Charging:

  • 0-99% white flashing
  • 100% full charged white
Diagram showing the 2600mAh battery capacity and various charging methods for the ETENWOLF AIR 3 pump.

Large capacity 2600mAh battery with multiple charging options.

Battery Care:

Please charge the device once every six months to maintain optimal battery performance, especially during long periods of non-use.

Troubleshooting

  • Red flashing light: Indicates high temperature warning or overload. Check for any vent blockages.
  • Pump not turning on: Ensure the battery is charged. If unable to charge, try using a compatible charger (5V/3A).
  • Weak or insufficient inflation/deflation: Check the battery level. Ensure the correct nozzle is securely attached and there are no obstructions in the inflation or deflation ports.
  • Overinflation prevention: Always check the maximum allowable pressure for your inflatable item to prevent damage or explosion. The pump requires manual stopping.

Specifications

Attribute Value (Air 3 pump)
Dimensions 1.8 inches x 1.9 inches x 2.3 inches (4.8cm x 4.8cm x 6cm)
Pressure High speed flow: 0.65PSI/4.5kPa
Low speed flow: 0.5PSI/3.5kPa
Inflation/Deflation speed High speed flow: 13CFM/360LM
Low speed flow: 8CFM/225LM
Battery capacity 2600mAh x 3.7V (9.6Wh)
Charging time 1.5 hours (5V/2A)
Operating temperature Charging: 0°C-45°C/30°F-113°F
Operating: -20°C-70°C/-4°F-158°F
Storage temperature -20°C-55°C/-4°F-131°F
Brightness of light 60 lumens, lighting duration: 40 hours
200 lumens, lighting duration: 10 hours
600 lumens, lighting duration: 3 hours
Image showing the dimensions of the ETENWOLF AIR 3 pump: 6cm height and 4.8cm width.

Compact dimensions for easy handling.

Comparison chart highlighting ETENWOLF AIR 3's superior inflation speed, 2600mAh battery, cooling system for heat dissipation, and long standby time compared to other pumps.

Why choose ETENWOLF AIR 3 inflatable pump.

Safety Instructions

  • This product is intended for adult use only.
  • Do not drop the unit into water or expose it to rain or water. This product is not waterproof.
  • Do not obstruct vent holes or open sources. Do not insert objects into the inflation or deflation connector.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.

Warranty & Support

2-Year Coverage:

Within two years of purchase, we will provide timely and effective online after-sale service. We will repair or replace any defective product (due to manufacturing fault) within this warranty period.

Contact Information:

Made in P.R.C

User Tips

  • Check Battery: If the pump seems weak or not performing as expected, ensure the battery is fully charged.
  • Nozzle Selection: Always use the correct nozzle for your inflatable to ensure efficient and effective inflation/deflation.
  • SOS Light: The integrated SOS light function can be a valuable safety feature in emergencies during outdoor activities.
  • Regular Charging: Charge the pump every six months, even if not in use, to maintain battery health and longevity.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.