1. Introduction
Thank you for choosing the realme Buds Wireless 5 ANC earphones. These neckband-style wireless earphones are designed to provide a superior audio experience with advanced noise cancellation and powerful bass. This manual will guide you through the setup, operation, and maintenance of your new device.

Figure 1: realme Buds Wireless 5 ANC - Overview of key features.
2. Package Contents
Please check the box for the following items:
- realme Buds Wireless 5 ANC Earphones x 1
- Quick Start Guide x 1
- Eartips x 6 (M size is pre-installed)
3. Product Overview
The realme Buds Wireless 5 ANC features a neckband design with earbuds, incorporating advanced audio and noise cancellation technologies.

Figure 2: Detailed feature breakdown of the realme Buds Wireless 5 ANC.
3.1. Dynamic Bass Driver
Equipped with a 13.6mm Dynamic Bass Driver featuring a titanized diaphragm, these earphones deliver rich, deep bass and clear, flexible middle and high pitches for an immersive sound experience.

Figure 3: Internal structure of the 13.6mm Dynamic Bass Driver and its frequency response.
3.2. Hybrid Noise Cancellation System
The 50dB Hybrid Noise Cancellation system utilizes both Feedforward and Feedback microphones to eliminate external noise, providing a quiet listening environment.

Figure 4: Hybrid Noise Cancellation mechanism with Feedforward and Feedback Mics.
4. Setup
4.1. Initial Charging
Before first use, fully charge your realme Buds Wireless 5 ANC. A full charge takes approximately 1 hour. A quick 10-minute charge can provide up to 20 hours of playback (at 50% volume in normal mode).

Figure 5: Internal view of the battery component in the neckband.
4.2. Bluetooth Pairing
- Ensure the earphones are powered on and in pairing mode (refer to the Quick Start Guide for specific instructions on entering pairing mode).
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for available devices and select "realme Buds Wireless 5 ANC" from the list.
- Once connected, the earphones will indicate successful pairing.
The earphones support Bluetooth 5.4 and have a connection range of up to 10 meters.
5. Operating Instructions
5.1. Noise Cancellation Modes
The earphones feature 50dB Hybrid Noise Cancellation and Adaptive Three-level Noise Reduction. While there are no physical control buttons or volume control on the earphones themselves, these features are typically managed via the connected device's settings or a dedicated app (note: the product specifications indicate 'Support APP: No', implying control is primarily device-based or automatic).

Figure 6: Adaptive Noise Reduction adapts to environments like train stations, indoors, and urban streets.
5.2. Audio Effects
Experience enhanced sound with Dynamic Audio and 360° Spatial Audio Effect. These features provide a theatre-level 360° acoustics experience, adding depth and dimension to your music.

Figure 7: Customizing audio settings for Dynamic Audio.

Figure 8: Visual representation of the 360° Spatial Audio Effect.
5.3. Phone Calls
The earphones include a microphone for clear calls with ENC Call Noise Cancellation. Battery life for phone calls is approximately 16 hours with noise cancelling/transparent mode on, and 20 hours in normal mode.
6. Maintenance
6.1. Cleaning
Regularly clean the earbuds and neckband with a soft, dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials. Remove eartips and clean them separately with mild soap and water if necessary, ensuring they are completely dry before reattaching.
6.2. Water and Dust Resistance
The earphones are rated IP55 for dust and water resistance. This means they are protected against limited dust ingress and low-pressure water jets from any direction. They are suitable for use during exercise and in light rain, but should not be submerged in water or exposed to high-pressure water. Ensure the charging port is dry before charging.

Figure 9: The earphones are designed for durability with IP55 rating.
6.3. Storage
Store the earphones in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on them or tangling the neckband.
7. Troubleshooting
- No Sound/Poor Sound Quality:
Ensure the earphones are properly paired and connected to your device. Check the volume levels on both the earphones (if applicable, though these do not have dedicated volume controls) and your connected device. Ensure the eartips are correctly fitted and clean. - Earphones Not Pairing:
Make sure the earphones are in pairing mode. Turn off and on Bluetooth on your device. Try restarting both the earphones and your device. Ensure the earphones are charged. - Noise Cancellation Not Working Effectively:
Ensure the eartips provide a good seal in your ear canal. Check for any obstructions on the microphone ports. - Battery Drains Quickly:
Battery life can vary based on volume level and ANC usage. Ensure the earphones are fully charged. If the issue persists, contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Product Name | realme Buds Wireless 5 ANC |
| Colors | Midnight Black, Twilight Purple, Dawn Silver |
| Sound Driver Size | 13.6mm Dynamic Bass Driver |
| Connection Range | ≤10m |
| Bluetooth Version | 5.4 |
| Dustproof and Waterproof Rating | IP55 |
| Audio Codecs | SBC/AAC |
| Battery Life (Playback, 50% volume) | 38 hours (ANC off), 20 hours (ANC on) |
| Battery Life (Phone Call) | 16 hours (ANC/transparent mode on), 20 hours (Normal mode on) |
| Noise Cancelling Features | 50dB Hybrid Noise Cancellation, ENC Call Noise Cancellation, Adaptive Three-level Noise Reduction |
| Audio Effect | Dynamic Audio, 360° Spatial Audio Effect |
| Fast Charge | 1 hour for full charge, 10 mins charge for 20 hours playback |
| Material | Plastic |
| Vocalism Principle | Dynamic |
| Communication | Wireless (Neckband) |
| Style | Neckband headphones |
| With Microphone | Yes |
| Active Noise-Cancellation | Yes |
| Volume Control | No |
| Control Button | No |
| Support APP | No |
9. User Tips
- Choose the Right Eartips: Experiment with the included eartip sizes to find the best fit for your ears. A good seal is crucial for optimal sound quality and effective noise cancellation.
- Manage Battery Life: To maximize battery life, consider turning off Active Noise Cancellation when not needed, as it consumes more power.
- Keep it Clean: Regularly cleaning your earbuds and eartips will prevent wax buildup and maintain sound quality and hygiene.
10. Warranty and Support
For warranty information and customer support, please refer to the official realme website or contact your local realme service center. Keep your purchase receipt as proof of purchase for any warranty claims.