1. Product Features
- Pure sine wave inverter output.
- Supports parallel operation of up to 9 units for increased capacity.
- Configurable input voltage range for various applications (home appliances, personal computers).
- Adjustable battery charging current based on specific application needs.
- Configurable AC/Solar Charger priority via LCD setting.
- Compatible with both mains voltage and generator power sources.
- Automatic restart function upon AC recovery.
- Comprehensive protection against overload, over temperature, and short circuits.
- Smart battery charger design for optimized battery performance and longevity.
- Cold start function for reliable operation in various conditions.
2. Setup and Installation
2.1 System Connection
Refer to the diagram below for a typical system connection. Ensure all connections are secure and follow local electrical codes.
Diagram shows connections for Solar Power (Max. VOC: 500VDC, PV Array MPPT Range: 90-500VDC, Max. PV Array Power: 15000W), Generator, Utility, 48V Lithium/Lead-Acid Battery, and Home Appliances (single phase 230V output 11KW). Max charging current: 150A (AC charger + solar charger).
2.2 Rear Panel Connections
Identify the various input and output terminals on the rear panel for proper wiring.
Rear panel includes: AC INPUT, MAIN OUTPUT, SECOND OUTPUT, PV1 (+/-), PV2 (+/-), RS232 port, BMS port, Parallel Connection ports, and DC INPUT.
2.3 Parallel Operation
The inverter supports parallel operation of up to 9 units, configurable for single or 3-phase systems. Refer to the diagram for communication and power connections.
Diagram illustrates parallel wiring for multiple inverters, including communication connections (1 to N units) and power distribution for single/3 phase output.
2.4 Battery Compatibility
This inverter is compatible with multiple battery types. When solar energy is present, setting the battery type to 'LIB' will activate lithium batteries after 3 seconds.
Compatible battery types include AGM, GEL, FLD, LI (Lithium), SLD, and USER-defined settings.
3. Operating Instructions
3.1 LCD Display and Control Buttons
The inverter features an LCD display and control buttons on the front panel for monitoring and configuring settings.
The front panel includes an LCD screen, status indicators (AC/INV, CHARGE, FAULT), and navigation buttons (UP, DOWN, ESC, ENTER) for menu access and setting adjustments.
3.2 Configuration Settings
Use the LCD menu to configure various operational parameters:
- Input Voltage Range: Adjust for optimal performance with home appliances or personal computers.
- Battery Charging Current: Set the desired charging current for your battery bank.
- AC/Solar Charger Priority: Choose whether AC power or solar power takes precedence for charging.
The inverter also features an auto-restart function when AC power is restored and a cold start function for initial power-up.
4. Maintenance
To ensure optimal performance and longevity of your PowMr Hybrid Solar Inverter, regular maintenance is recommended:
- Cleaning: Keep the inverter's exterior clean and free from dust and debris. Ensure ventilation openings are unobstructed.
- Connection Checks: Periodically inspect all electrical connections (PV, AC input/output, battery, parallel communication) for tightness and signs of corrosion.
- Environment: Ensure the inverter is installed in a well-ventilated area, within the specified operating temperature range (-10°C to 50°C), and protected from direct sunlight and moisture.
- Firmware Updates: Check the manufacturer's website for any available firmware updates to ensure your inverter has the latest features and bug fixes.
5. Troubleshooting
The PowMr Hybrid Solar Inverter is equipped with a smart protection system to prevent damage and ensure safe operation. If an issue occurs, the inverter will typically display an error code or indicator.
5.1 Smart Protection System
The inverter incorporates multiple protection modes:
- Charge low and high temperature protection
- Discharge low and high temperature protection
- Discharge overcurrent protection
- Charging overcurrent protection
- Charging undervoltage protection
- Short-circuit protection
- Solar panel reverse connection protection
- Battery overvoltage protection
- Over temperature protection
- Overload protection
If the inverter enters a protection mode, identify the cause (e.g., check battery temperature, load, or wiring) and resolve it. The inverter may automatically restart once the fault is cleared, especially after AC recovery.
6. Specifications
Detailed technical specifications for the PowMr 11KW Hybrid Solar Inverter (Model POW-HVM11KP):
| Parameter | Value |
|---|---|
| Model Number | POW-HVM11KP |
| Capacity | 11000VA / 11000W |
| PV&DC/AC | 12000VA / 12000W |
| Operating Temperature Range | -10°C to 50°C |
| Protection Degree | IP21 |
| Max. PV Array Power | 15KW (2x7500W) |
| PV Array MPPT Voltage Range | 90VDC - 500VDC |
| Full Load MPPT Range | 360VDC - 430VDC |
| Max Solar Voltage | 500VDC |
| Max Charging Current | 150A (MPPT) |
| Max Input Current | 36A |
| Nominal Input Current | 27A / 27A |
| Inverter Mode - Battery Voltage Range | 42VDC - 64VDC (48V nominal) |
| Max Battery Discharge Current | 228A |
| AC Output | 230VAC, 50/60HZ, 47.8A 1Φ (Pure Sine Wave) |
| AC Input - AC Charger | 54VDC 150A |
| AC Input | 230VAC, 50/60HZ, 60A 1Φ |
| Two Load Output Power (Full Load) | 11000W |
| Maximum Main Load | 11000W |
| Maximum Second Load | 11000W |
| Second Load Cut Off Voltage | 44VDC |
| Second Load Return Voltage | 52VDC |
| Weight | 22KG |
| Output Type | SINGLE |
| Is Smart Device | Yes |
| Certification | CE |
7. User Tips
- Off-Grid Capability: This inverter is designed to function effectively without a grid connection, making it suitable for standalone solar systems.
- Battery Compatibility: When connecting batteries, ensure they are compatible with the inverter's voltage range (48V nominal, 42-64VDC operating range). The inverter supports various battery chemistries, including Lithium (LI) with specific activation procedures.
- Dual PV Input: The inverter supports two solar inputs (PV1 and PV2), each capable of handling significant power, contributing to the total 15KW max PV array power.
- Output Voltage: The inverter provides a 230V AC output, suitable for standard household appliances in regions using this voltage.
8. Warranty and Support
The PowMr 11KW Hybrid Solar Inverter comes with a 1-year warranty from the date of purchase.
For technical support, warranty claims, or any operational questions, please contact PowMr customer service or your authorized dealer. Ensure you have your model number (POW-HVM11KP) and serial number (found on the product label) ready when contacting support.