Robotime ROKR Cuckoo Clock Mechanical 3D Wooden Puzzle Instruction Manual

1. Introduction

The Robotime ROKR Cuckoo Clock is an exquisite mechanical 3D wooden puzzle designed for assembly. This model features a three-story themed structure with vibrant silk-printed details, recreating vintage wood textures. Once assembled, it functions as a decorative wall clock with interactive sound and light effects.

2. Safety Information

WARNING: CHOKING HAZARD - small parts. Not for children under 3 years.

• Keep all small parts away from young children.
• Handle wooden pieces carefully to avoid splinters.
• Ensure proper ventilation if using any adhesives (not typically required for this model but good general practice).

3. Package Contents

Your Robotime ROKR Cuckoo Clock package includes:

• Precisely laser-cut wooden puzzle pieces (435 pieces)
• Detailed instruction manual (this document serves as a guide, refer to the included physical manual for step-by-step visual instructions)
• Necessary small components for mechanical functions (e.g., gears, wires for lights)

Note: Batteries are not included in the package.

4. Setup and Assembly

Assembly of the ROKR Cuckoo Clock is a DIY process that typically takes approximately 6 hours. It is suitable for individuals aged 14 and above.

4.1 Preparation

• Clear a spacious, well-lit workspace.
• Organize the wooden sheets and identify the different parts.
• Read through the entire physical instruction manual before beginning assembly.

4.2 Assembly Process

The puzzle pieces are crafted from high-quality, precisely laser-cut wood. Follow the step-by-step instructions provided in the physical manual to connect the pieces. Pay close attention to the orientation and fit of each component, especially for the mechanical parts.

4.3 Powering the Clock

The clock can be powered using either a Type-C cable or batteries. Batteries are not included and must be purchased separately.

• Battery Installation: Locate the hidden battery box (refer to the detailed images in the manual). Insert the required batteries according to the polarity markings.
• Type-C Power: Connect a Type-C cable to the designated input port (Input 5V=1A, as indicated in some diagrams).

5. Operating Instructions

Once assembled and powered, your ROKR Cuckoo Clock offers interactive features.

5.1 Cuckoo Mechanism

The clock features a charming cuckoo that emerges from its window, flaps its wings, and chirps on the hour.

5.2 Time-Telling Function

The cuckoo's time-telling function is controlled by a hidden switch:

• To start the chime function: Long press the hidden switch (light flashes 2 times).
• To tell time (single chime): Tap the hidden switch once (cuckoo chimes once).
• To turn off the chime function: Long press the hidden switch (light flashes 4 times).

5.3 Ambient Lighting

The clock is equipped with four soft ambient lights that illuminate the scene. These lights are activated by pulling the retro hand-pull switch.

5.4 Product Demonstration Video

6. Maintenance

• Cleaning: Use a soft, dry cloth to gently wipe dust from the wooden surfaces. Avoid using abrasive cleaners or excessive moisture.
• Storage: Store the assembled clock in a dry environment, away from direct sunlight or extreme temperature changes, to prevent warping or damage to the wood.
• Battery Replacement: If using batteries, replace them when the lights dim or the cuckoo mechanism becomes sluggish.

7. Troubleshooting

• Cuckoo not chiming/lights not working: Check battery installation and ensure they are fresh. If using Type-C, ensure the cable is properly connected and the power source is active. Verify the hidden switch is in the correct position (long press to start chime function).
• Parts not fitting: Do not force pieces. Refer to the physical manual's diagrams to ensure correct orientation. Gently sand edges if necessary, but this should rarely be needed due to laser precision.
• Broken parts during assembly: If a piece breaks, especially a critical structural or mechanical component, contact customer support for assistance.

8. Specifications

9. User Tips

• Handle with Care: Be gentle when detaching pieces from the wooden sheets and during assembly, especially with delicate parts like the door supports for the cuckoo.
• Organize Pieces: Before starting, sort the pieces by number or type to streamline the assembly process.
• Test Functions: After completing the electrical connections, test the lights and cuckoo mechanism before fully enclosing them to ensure everything works correctly.

10. Warranty and Support

For any questions, issues, or assistance with your Robotime ROKR Cuckoo Clock, please contact the seller directly. They are committed to replying within 12 hours to address your concerns.