1. Product Overview
The DOOYA DM25LEU Tubular Motor is a compact and efficient motor designed for automating rolling blinds. It features a built-in lithium battery, allowing for wireless operation and easy installation without the need for complex wiring. Control is achieved via an RF433 emitter, utilizing a new rolling code version for enhanced security and reliability. The motor is specifically designed to fit 38mm diameter tubes and is conveniently charged via a USB connection.
Video: Unboxing and demonstration of the DM25LEU Tubular Motor.
2. Safety Information
This product complies with relevant EU directives for electrical safety, electromagnetic compatibility, and environmental protection. Please adhere to the following safety guidelines:
- Ensure the motor is installed by a qualified individual if you are unsure about the process.
- Do not expose the motor to excessive moisture or extreme temperatures.
- Keep children and pets away from moving blinds.
- Do not attempt to open or repair the motor yourself. Contact support if issues arise.
- This product complies with EU RoHS. Do not dispose of it as household waste. Please recycle it in accordance with local regulations for waste electrical and electronic equipment.
3. Package Contents
The standard package for the DM25LEU Tubular Motor typically includes:
- 1 x DOOYA DM25LEU Tubular Motor with built-in Li battery
- 1 x USB Power Line for charging
- 1 x Crown (for fitting into the tube)
- 1 x Drive (for fitting into the tube)
Depending on the bundle purchased, additional accessories such as mounting brackets and compatible RF433 remote controls (e.g., DC2702D, DC2760AM) may be included.

Image: DM25LEU motor with included accessories.
4. Specifications
Refer to the table below for detailed technical specifications of the DM25LEU Tubular Motor:
| Feature | Specification |
|---|---|
| Model Number | DM25LEU-1.1/20 |
| Motor Type | DC Tubular Motor |
| Torque | 1.1 Nm |
| Rolling Speed | 20 r/min |
| Wattage | 8W |
| Current | 1.0A |
| Charge Voltage | DC5V/2A |
| Battery Type | Built-in Lithium Battery |
| Battery Capacity | 2200mAh |
| IP Rating | IP20 |
| Control Method | RF433 Emitter (Rolling Code) |
| Compatible Tube Diameter | 38mm |
| Max Load Capacity | 3 kg |
| Max Blind Width | 2.5 m |
| Max Blind Area | 8 m² |
| Product Weight | 1.32 kg |
| Certifications | CE, TUV, VDE, NF, ROHS, 3C, UL, FC, ISO9001, ISO14001 |

Image: Motor label displaying key specifications.

Image: Comprehensive specifications table.

Image: DOOYA product certifications.
5. Installation
This section outlines the steps to install the DM25LEU Tubular Motor into your rolling blind system.
5.1 Pre-installation Checks
- Ensure your rolling blind tube has an inner diameter of 38mm.
- Verify that the weight of your rolling curtain cloth does not exceed 3 kg.
5.2 Motor Insertion Steps
- Remove the existing manual rolling mechanism from your blind tube.
- Attach the crown and drive components to the motor as shown in the diagram.
- Carefully insert the DM25LEU motor into the 38mm blind tube. Ensure it fits snugly.
- Secure the motor and tube assembly into the blind's mounting brackets.

Image: Comparison of manual vs. motorized rolling and motor insertion steps.

Image: Visual guide for 38mm tube compatibility.

Image: Final installation steps for roller blinds.
6. Charging the Motor
The DM25LEU motor is powered by a built-in lithium battery and requires charging via the provided USB power line.
- Initial Charge: For the first use, charge the DM25LEU motor for at least 10 hours to ensure optimal battery performance.
- Regular Charging: It is recommended to charge the motor every 3 months to maintain battery health, even if not in frequent use.
- Low Voltage Alarm: Do not operate the motor when it indicates a low voltage alarm. Charge it promptly to avoid damage and ensure proper function.

Image: End of the motor showing the USB charging port and reset key.

Image: Close-up of the USB charging port and cable connection.
7. Operating Instructions
The DM25LEU motor is controlled using a compatible RF433 rolling code emitter.
7.1 Remote Control Compatibility
The new rolling code version of the DM25LEU motor is ONLY compatible with DOOYA rolling code remotes such as DC2760AM and DC2702D. It is NOT compatible with older fixed code remotes like DC2700, DC2760, DC2702, DC1602, DC92, DC251, DC1653, DC1651, or DC1650.

Image: DM25LEU motor shown with a compatible DC2702D remote control.

Image: DOOYA DC2702 remote control.
7.2 Basic Remote Functions
Once paired, use the remote control to operate your blinds:
- Up Arrow: Raises the blind.
- Down Arrow: Lowers the blind.
- Stop Button: Halts the blind at its current position.
- Limit Setting Buttons: Use these buttons (often marked with arrows or specific symbols) to set the upper and lower travel limits of your blind. Refer to your remote's specific instructions for detailed limit setting procedures.

Image: DC2702 remote control with labeled buttons for operation.
7.3 Pairing the Remote Control
The pairing process typically involves a sequence of button presses on both the motor (using the reset key) and the remote control. Please refer to the specific instructions provided with your remote control for the exact pairing procedure for rolling code motors.
8. Maintenance
To ensure the longevity and optimal performance of your DM25LEU Tubular Motor, follow these simple maintenance guidelines:
- Battery Care: Charge the motor's built-in lithium battery every 3 months, even if it has not been fully discharged, to prevent deep discharge and extend battery life.
- Cleaning: Keep the motor and surrounding area clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
- Inspection: Periodically check the motor and blind mechanism for any signs of wear, damage, or obstruction.
9. Troubleshooting
If you encounter issues with your DM25LEU Tubular Motor, consider the following:
- Motor Not Responding: Check if the motor's battery is charged. If the motor is in a low voltage alarm state, it will not operate. Charge the motor fully.
- Remote Control Issues: Ensure the remote control has fresh batteries. Verify that the remote is a compatible rolling code model (DC2760AM or DC2702D) and is correctly paired with the motor.
- Blind Not Moving Smoothly: Check for any obstructions in the blind's path or within the tube. Ensure the blind fabric is not too heavy for the motor (maximum 3 kg).
- Incorrect Travel Limits: If the blind stops at the wrong positions, the travel limits may need to be reset or reprogrammed using your remote control.
10. User Tips
- Always perform the initial 10-hour charge for the motor to ensure optimal battery performance from the start.
- Regularly charge the motor every three months to prolong the lifespan of the built-in lithium battery.
- Confirm your rolling blind tube is 38mm in diameter and the curtain fabric weighs no more than 3kg for proper motor function.
- Ensure you use a compatible DOOYA rolling code remote (e.g., DC2760AM or DC2702D) as fixed code remotes will not work with this motor.
11. Warranty and Support
The DOOYA DM25LEU Tubular Motor comes with a 5-year warranty.

Image: 5 Years Warranty logo.
Manufacturer Information
Name: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China
Tel: 86-18589043609
EU Authorized Representative
Name: Sophie Bennett
Address: 9 rue du Bat d'Argent, 69001 Lyon, France
Tel: 33-774555006
For further detailed instructions and support, please refer to the official user manual PDF available from the seller. A PDF version of the user manual can be found at: DOOYA DM25LEU User Manual (PDF)