HWATEL RG-58 3D-FB

Contents

HWATEL RG-58 3D-FB Coaxial Cable Instruction Manual

Model: RG-58 3D-FB

Brand: HWATEL

1. Introduction

This manual provides essential information for the safe and effective use of your HWATEL RG-58 3D-FB Coaxial Cable. This low-loss, double-shielded cable is designed for a wide range of applications, including 4G/5G cellular signal boosters, repeaters, amplifiers, and routers, supporting frequencies from 600MHz to 6000MHz. Please read this manual thoroughly before installation and operation.

2. Safety Information

  • Ensure all power to connected devices is off before connecting or disconnecting the cable.
  • Do not bend the cable sharply, as this can damage the internal structure and affect performance.
  • Avoid exposing the cable to extreme temperatures or direct sunlight for prolonged periods, which can degrade the PVC jacket.
  • Keep the connectors clean and free from dust or moisture to ensure optimal signal transmission.
  • If installing outdoors, ensure proper weatherproofing for all connections.

3. Package Contents

The package contents vary based on the selected connector type and cable length. Please verify your specific order against the following common configurations:

3.1 N-Type Connector Options

Coiled HWATEL RG-58 cable with N-male connectors on both ends
Figure 1: HWATEL RG-58 cable with N Male to N Male connectors.
Coiled HWATEL RG-58 cable with N-male and SMA-male connectors
Figure 2: HWATEL RG-58 cable with N Male to SMA Male connectors.

3.2 SMA Connector Options

Coiled HWATEL RG-58 cable with N-male and SMA-male connectors
Figure 3: HWATEL RG-58 cable with N Male to SMA Male connectors.

3.3 TS9 Adapter Option

Coiled HWATEL RG-58 cable with N-male and SMA-male connectors, plus a separate SMA-TS9 adapter
Figure 4: HWATEL RG-58 cable with N Male to SMA Male connectors and an SMA-TS9 Adapter.

3.4 CRC9 Adapter Option

Coiled HWATEL RG-58 cable with N-male and SMA-male connectors, plus a separate SMA-CRC9 adapter
Figure 5: HWATEL RG-58 cable with N Male to SMA Male connectors and an SMA-CRC9 Adapter.

4. Product Overview

The HWATEL RG-58 3D-FB cable is a high-quality, low-loss coaxial cable designed for efficient signal transmission. Its construction ensures minimal signal degradation over various frequencies.

4.1 Cable Construction

Cross-section diagram of HWATEL RG-58 3D-FB cable showing layers: Copper Core, Physically Foamed PE, Double High Density Shielding, Aluminium Shield, Dualable PVC.
Figure 6: Internal structure of the RG-58 3D-FB Low Loss Cable.

The cable features a robust multi-layer design:

  • Copper Core: Provides excellent electrical conductivity for signal transmission.
  • Physically Foamed PE: High-quality dielectric insulation to maintain signal integrity.
  • Double High Density Shielding & Aluminium Shield: Offers superior protection against electromagnetic interference (EMI) and radio frequency interference (RFI), ensuring low signal loss.
  • Dualable PVC Jacket: Durable outer layer for protection against environmental factors.

5. Setup

Follow these steps to properly connect your coaxial cable:

  1. Identify Connectors: Determine the type of connectors on your HWATEL cable (N-Male, SMA-Male) and the corresponding ports on your devices (e.g., cellular signal booster, antenna, router). If using adapters (TS9, CRC9), ensure they match your device's ports.
  2. Prepare Devices: Ensure all devices to be connected are powered off to prevent any electrical damage during connection.
  3. Connect Cable: Carefully align the cable connector with the device port. Gently push the connector straight in and then twist the outer nut clockwise until it is finger-tight. Do not overtighten, as this can damage the connector or port.
  4. Use Adapters (if applicable): If your device requires a TS9 or CRC9 connection, first connect the SMA-Male end of the cable to the SMA-TS9 or SMA-CRC9 adapter, then connect the adapter to your device.
  5. Secure Cable Runs: Route the cable in a way that avoids sharp bends, kinks, or being pinched. Use cable ties or clips to secure the cable, especially for longer runs or outdoor installations.
  6. Power On: Once all connections are secure, power on your devices and verify signal strength or connectivity as required by your application.

6. Operating

The HWATEL RG-58 3D-FB coaxial cable is a passive component designed to transmit RF signals. Its operation is dependent on the devices it connects. Once properly installed, the cable facilitates signal transfer between antennas, signal boosters, and other RF equipment.

  • Ensure the cable is connected to compatible 50 Ohm impedance devices.
  • Verify that the frequency range of your devices (600-6000 MHz) is within the cable's supported range for optimal performance.
  • Monitor the performance of your connected system (e.g., signal strength, data speed) to ensure the cable is functioning correctly.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your coaxial cable.

  • Regular Inspection: Periodically check the cable for any signs of physical damage, such as cuts, kinks, or severe bends. Inspect connectors for corrosion or looseness.
  • Cleaning: Keep connectors clean and dry. Use a soft, lint-free cloth to wipe away dust or debris. For stubborn dirt, a small amount of isopropyl alcohol can be used, ensuring it evaporates completely before reconnecting.
  • Environmental Protection: For outdoor installations, ensure all connections are properly sealed with weatherproof tape or boots to prevent moisture ingress.
  • Storage: When not in use, store the cable coiled loosely in a dry, cool place away from direct sunlight and extreme temperatures. Avoid tight coiling that can stress the cable.

8. Troubleshooting

If you experience issues with your signal, consider the following troubleshooting steps:

  • No Signal or Weak Signal:
    • Check all cable connections to ensure they are secure and properly tightened.
    • Inspect the cable for any visible damage (cuts, severe bends).
    • Ensure the correct cable type and connectors are being used for your application.
    • Verify that the connected devices (e.g., booster, antenna) are powered on and functioning correctly.
  • Intermittent Signal:
    • Loose connections are a common cause; re-tighten all connectors.
    • Check for environmental interference or nearby electronic devices that might be causing disruption.
  • Connector Issues:
    • If a connector appears damaged or corroded, it may need replacement.
    • Ensure adapters (TS9, CRC9) are fully seated and compatible with your device.

9. Specifications

FeatureSpecification
BrandHWATEL Original
ModelRG-58 3D-FB
TypeCoaxial RF Cable (RG-58 compatible with LMR200 SYV-50-3)
Impedance50 Ohm
Frequency Range600 - 6000 MHz
ShieldingDouble Shield (Double High Density Shielding, Aluminium Shield)
Inner ConductorCopper Core
DielectricPhysically Foamed PE
JacketDualable PVC
ColorWhite
Connectors AvailableN Male, SMA Male, TS9 Adapter, CRC9 Adapter
Cable Lengths Available5 Meter, 10 Meter, 20 Meter
CertificationsCE, FCC, RoHS

10. User Tips

Based on general user feedback and product inquiries:

  • For optimal performance, always choose the shortest possible cable length required for your setup to minimize signal loss.
  • When connecting to devices with TS9 or CRC9 ports, ensure the correct adapter is used and securely fastened to the SMA connector.
  • Consider the environment of installation. For outdoor use, additional weatherproofing measures for connectors are highly recommended to prevent water damage and ensure long-term reliability.

11. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact HWATEL customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.