HWATEL RG58 3D-FB

Contents

HWATEL RG58 3D-FB Low Loss RF Coaxial Cable

Instruction Manual

Model: RG58 3D-FB | Brand: HWATEL

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your HWATEL RG58 3D-FB Low Loss RF Coaxial Cable. This cable is designed for high-performance applications, particularly for connecting cellular signal boosters and repeaters, ensuring minimal signal loss across a wide frequency range.

HWATEL Original Low Loss Cable - RG-58 3D-FB cable structure diagram showing Copper Core, Phisically Foamed PE, Double High Density Shielding, and Dualable PVC.
Figure 1: Internal structure of the HWATEL RG58 3D-FB Low Loss Cable, highlighting its copper core, foamed PE dielectric, double high-density shielding, and durable PVC jacket.

2. Specifications

Feature Detail
Brand HWATEL Original
Model Standard RG-58 3D-FB (compatible with LMR200, SYV-50-3)
Certification CE, FCC, RoHS
Impedance 50 ohm
Frequency Range 600 - 6000 MHz
Color White
Default Connector N Male to N Male
Optional Connectors/Adapters N Male to SMA Male, N Male to SMA Male with TS9 Adapter, N Male to SMA Male with CRC9 Adapter
Available Lengths 0M (Bridge), 3M, 10M, 15M, 20M, 30M

3. Setup and Installation

The HWATEL RG58 3D-FB coaxial cable is designed for easy integration into your signal booster or repeater system. Follow these general steps for installation:

  1. **Identify Connector Types**: Ensure the connectors on your cable match the ports on your signal booster/repeater and antennas. Common configurations include N Male to N Male, or N Male to SMA Male with various adapters (TS9, CRC9) for specific devices.
  2. **Connect to Signal Booster/Repeater**: Carefully screw the N Male connector of the cable onto the corresponding port of your signal booster or repeater. Hand-tighten only; do not overtighten to avoid damaging the connectors.
  3. **Connect to Antenna (if applicable)**: If using an extension cable for an antenna, connect the other end of the cable to your antenna. Again, ensure a secure, hand-tightened connection.
  4. **Route the Cable**: Route the cable along a path that avoids sharp bends, kinks, or excessive tension. Secure the cable using appropriate cable ties or clips to prevent accidental disconnections or damage.
  5. **Verify Connection**: After installation, visually inspect all connections to ensure they are snug and properly seated.

3.1. Packing List Examples

Depending on your chosen cable length and connector configuration, your package will contain the following:

  • **0M Bridge (N Male - N Male)**: A short N Male to N Male connector, ideal for direct coupling with no loss.
  • Packing List (0M Bridge) - N Male to N Male connector
    Figure 2: 0M Bridge (N Male to N Male connector).
  • **3M Cable (N Male - N Male)**: A 3-meter RG58 3D-FB cable with N Male connectors on both ends.
  • Packing List (3M Cable) - N Male to N Male cable
    Figure 3: 3M RG58 3D-FB cable with N Male connectors.
  • **10/15/20/30M Cables (N Male - N Male)**: Various lengths of RG58 3D-FB cable with N Male connectors on both ends.
  • Packing List (10/15/20/30M Cables) - N Male to N Male cable
    Figure 4: Example of longer RG58 3D-FB cables with N Male connectors.
  • **20M-SMA Cable (N Male - SMA Male)**: A 20-meter RG58 3D-FB cable with an N Male connector on one end and an SMA Male connector on the other.
  • Packing List (20M-SMA Cable) - N Male to SMA Male cable
    Figure 5: 20M RG58 3D-FB cable with N Male and SMA Male connectors.
  • **20M-TS9 Cable (N Male - SMA Male with TS9 Adapter)**: A 20-meter RG58 3D-FB cable with an N Male connector on one end and an SMA Male connector on the other, plus a TS9 adapter.
  • Packing List (20M-TS9 Cable) - N Male to SMA Male cable with TS9 adapter
    Figure 6: 20M RG58 3D-FB cable with N Male, SMA Male, and TS9 adapter.
  • **20M-CRC9 Cable (N Male - SMA Male with CRC9 Adapter)**: A 20-meter RG58 3D-FB cable with an N Male connector on one end and an SMA Male connector on the other, plus a CRC9 adapter.
  • Packing List (20M-CRC9 Cable) - N Male to SMA Male cable with CRC9 adapter
    Figure 7: 20M RG58 3D-FB cable with N Male, SMA Male, and CRC9 adapter.

4. Operating Considerations

Once properly installed, the HWATEL RG58 3D-FB cable operates passively as a signal conduit. To ensure optimal performance:

  • **Signal Integrity**: The low-loss design of this cable minimizes signal degradation. Ensure all connected devices (booster, antennas) are compatible with the cable's 600-6000 MHz frequency range and 50 ohm impedance.
  • **Environmental Factors**: While durable, extreme temperatures, direct prolonged sunlight, or excessive moisture can affect cable longevity. Install in protected areas where possible.
  • **Interference**: Route cables away from high-power electrical lines or other sources of electromagnetic interference to maintain signal quality.

5. Maintenance

The HWATEL RG58 3D-FB coaxial cable requires minimal maintenance to ensure long-term performance:

  • **Regular Inspection**: Periodically check the cable for any signs of physical damage, such as cuts, kinks, or frayed shielding. Inspect connectors for corrosion or looseness.
  • **Cleaning**: Keep connectors clean and free of dust or debris. Use a soft, dry cloth to wipe down the cable if it becomes dirty. Avoid using harsh chemicals or abrasive materials.
  • **Secure Connections**: Ensure all connections remain hand-tight. Loose connections can lead to signal loss or intermittent performance.
  • **Avoid Stress**: Do not pull, twist, or bend the cable sharply, especially near the connectors, as this can damage the internal structure and affect performance.

6. Troubleshooting

If you experience issues with your signal booster or repeater system, consider the following troubleshooting steps related to the coaxial cable:

  • **Poor Signal Strength**:
    • Check all cable connections to ensure they are secure and hand-tight.
    • Inspect the cable for any visible damage (kinks, cuts, severe bends).
    • Ensure the cable length is appropriate for your setup; excessively long cables can introduce signal loss, though this low-loss cable minimizes it.
  • **Intermittent Signal**:
    • Verify that connectors are not loose or corroded.
    • Ensure the cable is not being moved or stressed, which could cause temporary disconnections.
  • **No Signal**:
    • Confirm that the correct cable type and connectors are being used for your equipment.
    • Test the cable with a known working setup if possible, or try a different cable to isolate the issue.

7. User Tips

  • For optimal performance, always choose the shortest practical cable length for your installation to minimize any potential signal loss.
  • When using adapters (TS9, CRC9), ensure they are securely attached to the SMA Male connector to maintain a reliable connection.
  • Consider using weather-proofing tape around outdoor connections to protect them from moisture and environmental elements, extending their lifespan.

8. Warranty and Support

HWATEL is committed to providing high-quality products. For any technical assistance, product inquiries, or support needs, please contact HWATEL customer service. Refer to your purchase documentation for specific contact details.

This product is certified with CE, FCC, and RoHS standards, ensuring compliance with relevant safety and environmental regulations.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.