1. Introduction
The MicroZone MC6C MINI is a compact and lightweight 2.4G 6-channel radio controller designed for a wide range of remote-controlled models, including fixed-wing aircraft, cars, boats, multi-axis drones, mowers, and intelligent agricultural machines. It features a 2.4GHz FHSS digital proportional R/C system, offering reliable control and various programmable functions.
2. Product Features
The MC6C MINI offers several key features for enhanced control and user experience:
- Widely Applied: Compatible with various RC models.
- Long Control Distance: Achieves long control distance and anti-interference through unique software algorithms.
- Long Battery Life: Operates for more than 8 hours with 4pcs No.5 batteries or 2pcs lithium batteries.
- Smaller Size: More compact and lighter than the previous MC6C model for better portability and feel.
- Simulation Training: Connects to a simulator for practice.
- Failed Safe Settings: Includes loss of control protection.
- Compatible with Multiple RX: Supports various MicroZone receivers.
- Multiple Settings: Offers various programmable settings.
- Key Lock: Prevents accidental changes.
- Waterproof Button: Features enclosed stickers for waterproof and rainproof functions.
- Mower Throttle Lock: Specific function for mower applications.
3. Setup
3.1. Battery Installation
The remote control can be powered by 4pcs No.5 (AA) batteries or a 2S lithium battery (DC4.5-9V).
- Using No.5 Batteries: Open the battery compartment cover on the back of the transmitter. Insert four No.5 batteries, ensuring correct polarity as indicated inside the compartment.
- Using 2S Lithium Battery: Alternatively, insert a 2S lithium battery into the battery compartment socket.
3.2. External Power Supply
You can connect an external power supply to the DC power socket on the right side of the remote control. When using an external power supply, please remove the battery from the remote control battery compartment first.
3.3. Frequency Pairing/Alignment
When unpacking for the first time, please compare the frequency between the transmitter and receiver. After successful frequency comparison, the transmitter and receiver will receive a short distance testing at the same time. Holding the transmitter 10 to 15 meters away from the receiver, and shaking the transmitter rocker to observe if the model is controlled by the transmitter. If controlled, it indicates that the transmitter and receiver are working properly.
After the remote control is turned off and the receiver is powered on, press the frequency control button on the receiver, and the orange light will flash quickly to indicate the receiver. Enter the frequency matching mode, and then turn on the remote control. The receiver's orange light will turn on permanently, and the receiver will receive a normal signal.
4. Operating Instructions
4.1. Remote Control Layout and Functions
4.2. Channel Reverse Settings
Press any key (AIL, ELE, THR, RUD) for more than 1 second to switch direction. The direction indicator light will light up as positive. When the indicator light is on, it indicates a reverse direction.
4.3. Mixed Control
After turning on the machine, press the MIX key for 3 seconds to switch to mixed control mode. The left light is for 2/4 mixed control, and the right light is for 1/2 mixed control.
4.4. Left and Right Hand Mode Switching
Press and hold the (AIL+RUD) button before turning on the transmitter to switch between left and right hands. In left-hand mode, the left joystick controls channels 1 and 2, and the right joystick controls channels 3 and 4. In right-hand mode, the left joystick controls channels 3 and 4, and the right joystick controls channels 1 and 2.
4.5. D/R Control
The large and small rudder switching switch. The large rudder signal output is 100% (i.e., 1000-2000), and the small rudder output is 50% (i.e., 1250-1750).
4.6. Keyboard Lock
After turning on the machine, press the (LOCK) key for 3 seconds to lock it. After locking, the lock light will light up, and the fine adjustments and control/reverse key are not available.
4.7. Joystick Calibration
To calibrate the joysticks, swing both rockers to their maximum amplitude, then center them. After both joysticks are centered, rotate the D/R switch to complete calibration. The power light and mode light will turn off, and the joysticks are calibrated.
4.8. PPM Simulator Signal
The PPM simulator signal outputs 6 channels every 20ms, with 1ms from the low rising edge, and the 2nd rising edge to the 6th rising edge is the second rising edge to the 6th channel. 1 data, the time from the second rising edge to the third rising edge is the channel 2 data, the time from the third rising edge to the fourth rising edge is the channel 3 data, the second rising edge to the third rising edge is the channel 2 data, and so on.
5. Maintenance
5.1. Battery Life
The battery life of 4pcs No.5 batteries or 2pcs lithium batteries can reach more than 8 hours.
5.2. Automatic Shutdown
To save power and extend battery life, the remote control will automatically shut down after 10 minutes of inactivity (and will not automatically shut down when in a speed-locked state Power off).
5.3. Battery Replacement
If the power light and mode light appear alternately flashing, and accompanied by a dripping sound, it indicates low battery. Please replace the battery as soon as possible.
6. Troubleshooting
6.1. Loss of Control Protection
When the receiver cannot receive the transmitter signal normally, the loss of control protection will activate. This occurs when the transmitter is turned off or the distance exceeds the range that the receiver can receive the signal. When the signal cannot be received, it will return to the set runaway protection value to protect the model from damage.
6.2. Matters Needing Attention
Before using the remote control, carefully read the following precautions:
- This product is not a toy and is not suitable for children under the age of 14. This product is a model product out of control, which may cause injury or damage to people or property. Please operate with caution.
- Please do not use it in harsh weather conditions such as strong winds, thunderstorms, snow, low energy levels, etc.
- Do not use the remote control in snowy or watery places. If rainwater enters the remote control, the circuit will be short-circuited and cannot be used.
- Do not use the remote control in crowded places. Do not go out of control places where interference affects more than 200 meters are as follows.
- Do not use in places with strong signal transmission towers.
- Near high-voltage power lines and communication broadcasting antennas.
- Near the voltage power lines tower.
- The coupling of wireless communication and the commercial path of mobile activities.
- Navigation domain.
- Do not use this product if you feel tired, uncomfortable, drunk, or excited about drugs, otherwise it will cause serious injury to yourself or others. The value of.
- When the remote control is turned on, please check the low-frequency radio band previously used. Please ensure that the frequency of the remote control is not the same as the frequency of other models. If it cascades inside the power line, it causes the remote control model to lose control.
- When the remote control is turned on, please check whether the steering gear and other steering gear actions and controls are in the same direction, otherwise it may cause damage to the model. Severe damage to the model.
- When the remote control distance continues to be too far, there is a possibility of losing control. Please shorten the remote control distance and try to operate the model in a safe area. If the remote control distance is still too far, please replace the battery as soon as possible.
- When the remote control is turned on, be sure to cut off the power supply of the receiver and then turn off the remote control. If the power to the remote control is turned off first, the receiver will still be on. Operation may cause the model to lose control and cause serious injury to others or damage to property.
- Improper use of the remote control may cause serious injury or even death to the operator or others. To ensure the safety of yourself and others, please strictly follow the instructions in this manual.
- The remote control products are connected to our company's 2.4G wireless communication products. In addition, other consistent products can be connected to our company's products. The product is of great value.
7. Specifications
7.1. Transmitter Specifications (6C-MINI)
| Parameter | Value |
|---|---|
| Model | 6C-MINI |
| Color | Off-White |
| Number of Channels | 6 |
| Applications | Fixed wing, Car, Ship, Multi Axis, Mower, Intelligent Agricultural Machines |
| Control Range | >800m |
| Frequency Range | 2401-2478MHz |
| Rocker Dynamic Range | 80% -120% |
| Fine Tuning Method | Electronic Fine Tuning |
| Transmitting Power | ≤ 100mW |
| Input Voltage | DC4.5-9V |
| Modulation Mode | FSK |
| Power Supply Requirements | 4pcs No.5 batteries or 2S lithium batteries |
| Low Voltage Alarm | Yes |
| Analog Picking (PPM) | Yes |
| Channel Forward and Reverse Indication | Support |
| Runaway Protection Settings | Support |
| LED Indication | Support |
| Supports Receivers | MC6RE-V2, MC7RB-V2, MC6RE, MC7RB, MC9002, E6R-E |
| Size | 160 * 80 * 165mm |
| Weight | 470g |
7.2. Receiver Specifications
| Parameter | MC6RE-V2 | MC7RB-V2 |
|---|---|---|
| Model | MC6RE-V2 | MC7RB-V2 |
| Color | Teal transparent | Teal transparent |
| Applications | Fixed-wing/Semperoper/Boat/Multi-axis | Fixed-wing/Semperoper/Boat/Multi-axis |
| Channel output | 6 PWM signals, 1 SBUS signal | 7 PWM signals, 1 SBUS signal |
| Frequency range | 2401MHz-2478MHz | 2401MHz-2478MHz |
| Control range | >800m | >800m |
| Receiver supply voltage | DC:4.5-6V | DC:4.5-6V |
| SBUS signal | Support | Support |
| Frequency pairing mode | Contact to frequency | Contact to frequency |
| Recovery performance | Fast signal recovery | Fast signal recovery |
| Runaway protection settings | Support | Support |
| Remote control support | 6C-MINI/C7-MINI/8B-MINI/Classic-10 | 6C-MINI/C7-MINI/8B-MINI/Classic-10 |
| Antenna type | External antenna | Built-in antenna |
| Antenna length | 110mm | / |
| Size | 37*23*13 (mm) | 42*30*13 (mm) |
| Weight | 7g | 7g |
7.3. Other Product Properties
| Property | Value |
|---|---|
| High-concerned chemical | None |
| Obstacle avoidance types | No support |
| Motor Type | Brushless Motor |
| Integrated propeller guard | Not Include |
| Max Wind Speed Resistance | < 10 KM/H |
| Max Takeoff Weight | <1kg |
| Equipped with Aerosol Spraing System/Spread Tank Volume | No |
| Video Maximum Resolution[Pixel X Pixel] | 720P (1280x720) |
| Category | Camera Drone |
| Aircraft Operating Frequency | Other |
| Drone Weight | 50 |
| Camera Mount Type | Other |
| GPS | No |
| Display Control | Yes |
| Connectivity | APP Controller |
| Flight Time | others |
| Remote Distance | other |
| Camera Integration | Camera Not Included |
| Camera Features | 720p HD Video Recording |
| Brand Name | XDRC |
| Origin | Mainland China |
| Sensor Size | None |
| Aerial Photography | Yes |
8. User Tips
No specific user tips were available from reviews or Q&A content for this product.
9. Warranty and Support
9.1. Disclaimer
⚠️ For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.
9.2. Service Commitment
The manufacturer is committed to providing quality products and support. For any issues or inquiries, please refer to the seller's contact information or the official MicroZone website.
9.3. Security & Privacy
The seller emphasizes security and privacy:
- Safe payments: Personal details are not shared with third parties without consent.
- Secure personal details: Privacy is protected, and personal details are kept safe and secure.
