Introduction
Thank you for choosing the HYULIGHTS HYU-150B 180W 3D Moving Head Stage Light. This device is designed to provide powerful and versatile lighting effects for various events, including weddings, parties, music bars, and DJ performances. This manual will guide you through the proper setup, operation, and maintenance of your new lighting fixture to ensure optimal performance and longevity.
Package Contents
Upon unpacking your device, please ensure all the following items are included:
- One (1) HYULIGHTS HYU-150B Moving Head Light unit
- One (1) Power Cable
- One (1) User Manual (this document)
- One (1) DMX Cable
- One (1) Bow Mount and two (2) Screws for installation
Setup
Installation
The HYU-150B moving head light is designed for self-contained installation. It can be placed on a flat surface or mounted using the provided bow mount and screws. Ensure the installation location is stable and secure to prevent accidental falls.
- Surface Placement: Place the unit on a stable, level surface, ensuring adequate ventilation around the device.
- Mounting: Attach the bow mount to the bottom of the light using the provided screws. Securely fasten the mounted light to a truss or other suitable structure. Always use safety cables (not included) when mounting overhead.
Connections
Connect the device to power and DMX control as follows:
- Power Connection: Use the provided power cable to connect the light to an AC 110-240V, 50-60Hz power source. Ensure the ON/OFF switch is in the 'OFF' position before connecting power.
- DMX Connection: For DMX control, connect a DMX cable from your DMX controller's output to the 'DMX IN' port on the light. If linking multiple lights, connect from the 'DMX OUT' of the first light to the 'DMX IN' of the next, and so on.
Operating Instructions
The HYU-150B offers multiple operating modes and features:
Control Panel
The unit features a 4-digit LED display and control buttons (MENU, UP, DOWN, ENTER) for mode selection and parameter adjustment.
Playing Modes
- Auto-running: The light will cycle through pre-programmed shows automatically.
- Sound-activated: The light reacts to music or sound picked up by its built-in microphone.
- DMX512: For professional control, connect to a DMX controller to manage all functions (16/20 channels).
- Master-Slave: Link multiple units where one acts as the master (controller) and others as slaves, synchronizing their effects.
Key Features and Effects
- Movement:
- Horizontal Scan Angle (Pan): 540°, speed controllable.
- Vertical Scan Angle (Tilt): 180°, speed controllable.
- Light Source: 1Pcs 180W White LED High Power.
- Halo Effect: 30W 24LED SMD5050 RGB 3in1, providing vibrant halo rings around the main beam.
- Beam Angle: 1.5°, for sharp and focused beams.
- Color Wheel: Features 8 colors + half color effect, with infinite rotating speed.
- Gobo Wheel: Includes 8 gobos + shake effect, with infinite rotating speed.
- Prism:
- 1pcs 18 rotating prisms (No Zoom)
- 1PCS 3D Prism
- Dimmer: 0-100% with regulated constant color control for smooth intensity adjustments.
- Strobe: Adjustable strobe effect at 25 times/second.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your moving head light.
- Cleaning: Periodically clean the exterior casing and optical lenses with a soft, lint-free cloth. For stubborn dirt, use a mild cleaning solution specifically designed for electronics, applied to the cloth, not directly to the unit.
- Ventilation: Ensure all ventilation openings are clear of dust and debris to prevent overheating.
- Inspection: Regularly check all cables and connections for wear or damage. Replace any damaged components immediately.
- Storage: When not in use for extended periods, store the light in a dry, dust-free environment, preferably in its original packaging or a protective case.
Troubleshooting
If you encounter issues with your moving head light, refer to the following common troubleshooting steps:
- No Power:
- Check if the power cable is securely connected to both the light and the power outlet.
- Ensure the ON/OFF switch on the rear panel is in the 'ON' position.
- Verify the power outlet is functional.
- Check the fuse on the rear panel. If blown, replace it with a fuse of the same type and rating.
- No DMX Control:
- Ensure DMX cables are correctly connected (DMX IN/OUT).
- Verify the DMX address setting on the light matches your controller's settings.
- Check for faulty DMX cables.
- Ensure the DMX controller is functioning correctly.
- Light Not Moving/Responding:
- In DMX mode, check DMX signal and channel assignments.
- In Auto or Sound-activated mode, ensure the correct mode is selected via the LED display.
- If the unit feels hot, allow it to cool down. Overheating can cause temporary shutdown.
- Dim or Flickering Light:
- Check power supply stability.
- Ensure the dimmer setting is not too low.
If problems persist after following these steps, please contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | HYULIGHTS |
| Model Number | HYU-150B |
| Item Type | Stage Lighting Effect |
| Occasion | Professional Stage & DJ |
| Voltage | AC110-240V, 90-240V |
| Power Source | AC |
| Total Power | 180W |
| Light Source | 1Pcs 180W White LED High Power |
| Halo Effect LED Source | 30W 24LED SMD5050 RGB 3in1 |
| Is Bulbs Included | Yes |
| Strobe | 25 times/sec |
| Prisms | 1pcs 18 rotating prisms (No Zoom) |
| 3D Prism | 1PCS 3D Prism |
| Beam Angle | 1.5° |
| Playing Mode | Auto-running, Sound-activated, DMX512, Master-Slave |
| Control Channel | 16/20 channels |
| Horizontal Scan Angle (Pan) | 540°, speed controllable |
| Vertical Scan Angle (Tilt) | 180°, speed controllable |
| Color Wheel | 8 colors + Half color effect + color rotating speed (infinite rotating) |
| Gobo Wheel | 8 gobos + shake + Gobo Rotating speed (infinite rotating) |
| Dimmer | 0-100% with regulated constant color control |
| Control Panel | 4 Digital LED display figures |
| Display Board | LED display |
| Net Weight (N.W) | 4.3 KG |
| Gross Weight (G.W) | 5 KG |
| Packing Size | 34.5*26*25.5cm |
| Installation Method | Self-contained |
| Certification | CE, FCC, RoHS, WEEE |
User Tips
- For optimal DMX control, ensure each light in a chain has a unique DMX address.
- Experiment with different gobos and prism effects to create unique visual displays.
- When using sound-activated mode, adjust the microphone sensitivity for best response to your music.
- Always allow sufficient cool-down time after extended use to prolong the lifespan of the LED and internal components.
Warranty and Support
Your HYULIGHTS HYU-150B Moving Head Stage Light comes with comprehensive support:
- 2-Year Warranty: We provide a 2-year warranty. If any quality problems occur within 2 years from the date of purchase, we will send you brand new items for free or give you a full refund.
- Quick Response: You can contact us without any hesitation at any time. We will reply to you within 12 hours. (It would be appreciated if you could provide us with a video or pictures if available).
- Friendly Reminder: It's better to contact us than leaving a negative shopping experience. Nothing is more important than your satisfaction, and we will do our best to serve you.