1. Introduction
This manual provides essential information for the safe and efficient use of your PowMr LiFePo4 battery. Please read it thoroughly before installation and operation to ensure optimal performance and longevity. PowMr LiFePo4 batteries are designed as a superior alternative to traditional lead-acid batteries, offering enhanced performance and a longer lifespan for various energy storage applications.
Note: The MINI model is discontinued and no longer sold. Please do not purchase it.
2. Safety Information
Always observe the following safety precautions when handling and operating your PowMr LiFePo4 battery:
- Do Not Short Circuit: Ensure terminals are correctly connected and avoid any direct contact between positive and negative terminals.
- Do Not Open Battery: The battery casing should not be opened or tampered with. Internal components are not user-serviceable.
- Do Not Charge in a Sealed Container: Ensure adequate ventilation during charging to prevent gas accumulation.
- Recycle Properly After Discharge: Dispose of batteries according to local regulations for LiFePo4 batteries.
- Temperature: Operate and store the battery within the specified temperature ranges to prevent damage and ensure safety.
The built-in Battery Management System (BMS) provides comprehensive protection against:
- Overvoltage
- Undervoltage
- Overcurrent
- Short Circuit
- Overtemperature
3. Product Features
- Grade A Cells: Constructed with high-quality Grade A battery cells for reliable performance.
- Long Cycle Life: Offers 6000+ cycles at 80% Depth of Discharge (DOD), ensuring extended usability.
- Built-in BMS: Integrated Battery Management System provides comprehensive protection against overcharge, over-discharge, overcurrent, short circuit, and overtemperature.
- Fast Charging: Capable of fast charging, significantly reducing charging time compared to lead-acid batteries.
- Lightweight Design: Approximately half the weight of a comparable lead-acid battery, making it easier to handle and install.
- Expandable Capacity: Supports configurations of up to 4 batteries in series (max 96V 100Ah) and 4 batteries in parallel (max 24V 400Ah) for increased energy storage.
- Wide Operating Temperature: Can be used normally in a temperature range of -2°C to 55°C.
- Durable Construction: Features an ABS case material and IP65 waterproof rating for enhanced durability and safety.
4. Specifications
The following table details the specifications for the PowMr 100Ah LiFePo4 battery models:
| Parameter | POW-100AH-12.8V | POW-100AH-25.6V |
|---|---|---|
| Battery Type-Chemistry | LiFePO4 | LiFePO4 |
| Nominal Voltage | 12.8V | 25.6V |
| Nominal Capacity | 100AH | 100AH |
| Energy Density | 1280WH | 2560WH |
| Dimensions (LxWxH) | 325*170*215mm | 485*170*240mm |
| Weight | 10.5KG | 19.5KG |
| Terminal Type | T16 | M8 |
| Terminal Torque | 8.5NM | 8.5NM |
| Case Material | ABS | ABS |
| BMS Built-in | YES | YES |
| Self-Discharging Per Month | >98% | >98% |
| Max in Parallel | 4PCS | 4PCS |
| Max in Series | 4PCS | 4PCS |
| Charging Voltage Range | 10.8-14.4V | 21.6-29.2V |
| Recommend Charge Voltage | 14V | 29.2V |
| Max Charge Voltage | 14.6V | 29.2V |
| Max Continuous Current | 100A | 100A |
| Recommend Discharge Voltage | 11.2V | 22.4V |
| Max Discharge Voltage | 10.8V | 20V |
| Max Continuous Discharge Current | 100A | 100A |
| Cycle Life | 6000 Cycles | 6000 Cycles |
| Discharge Temperature | (-2 to 55)℃ | (-2 to 55)℃ |
| Charge Temperature | (0 to 55)℃ | (0 to 55)℃ |
| Storage Temperature | (-2 to 45)℃ | (-2 to 45)℃ |
5. Setup and Installation
Before installation, ensure all components are present and undamaged. Wear appropriate personal protective equipment.
5.1. Terminal Connections
- Connect the battery terminals securely. The 12.8V model uses T16 terminals, and the 25.6V model uses M8 terminals.
- Apply a torque of 8.5 NM to the terminal bolts to ensure a firm connection.
- Ensure correct polarity: positive (+) to positive, negative (-) to negative.
5.2. Series and Parallel Configuration
The PowMr LiFePo4 batteries can be connected in series and parallel to achieve higher voltage or capacity:
- Maximum Series Connection: Up to 4 batteries can be connected in series, achieving a maximum voltage of 96V (for 24V models) or 51.2V (for 12V models) while maintaining the original capacity (100Ah).
- Maximum Parallel Connection: Up to 4 batteries can be connected in parallel, achieving a maximum capacity of 400Ah while maintaining the original voltage (12.8V or 25.6V).
- Combined Configuration: A maximum configuration of 4 series and 4 parallel is supported, allowing for a total capacity up to 400Ah and total voltage up to 51.2V (for 12V models) or 102.4V (for 24V models), with total energy up to 20.48kWh.
6. Operating Instructions
6.1. Charging
- Charging Voltage Range: 10.8-14.4V for 12.8V models, 21.6-29.2V for 25.6V models.
- Recommended Charge Voltage: 14V for 12.8V models, 29.2V for 25.6V models.
- Max Charge Voltage: 14.6V for 12.8V models, 29.2V for 25.6V models.
- Max Continuous Current: 100A.
- Recommended Charging Current: 0.2C (20A) for optimal lifespan.
- Fast Charging: The battery can be fully charged in approximately 1 hour with a maximum charging current of 100A.
6.2. Discharging
- Recommend Discharge Voltage: 11.2V for 12.8V models, 22.4V for 25.6V models.
- Max Discharge Voltage: 10.8V for 12.8V models, 20V for 25.6V models.
- Max Continuous Discharge Current: 100A.
- Energy Capacity: 1280Wh for 12.8V models, 2560Wh for 25.6V models.
6.3. Applications
PowMr LiFePo4 batteries are suitable for a wide range of applications, including:
- Home energy storage systems
- Camping and outdoor power
- Marine applications (boats, yachts)
- Recreational Vehicles (RVs) and golf carts
- Backup power for power outages
- Solar PV systems
7. Maintenance
- Storage: Store the battery in a cool, dry place within the recommended storage temperature range of -2°C to 45°C.
- Self-Discharge: The battery has a low self-discharge rate of less than 2% per month. For long-term storage, it is recommended to charge the battery to 50-70% capacity every 3-6 months.
- Cleaning: Keep the battery terminals clean and free from corrosion. Use a dry cloth to wipe the battery surface.
- Inspection: Periodically inspect the battery for any physical damage or loose connections.
8. Troubleshooting
The built-in BMS is designed to prevent most common issues. If the battery is not functioning as expected, consider the following:
- No Output/Charging: The BMS may have activated a protection mode (e.g., undervoltage, overvoltage, overcurrent, short circuit, overtemperature). Disconnect the load/charger, allow the battery to rest, and then attempt to restart or reconnect.
- Overvoltage Protection: If the charging voltage exceeds the maximum limit, the BMS will stop charging. Ensure your charger's voltage settings are correct.
- Undervoltage Protection: If the battery discharges below the minimum voltage, the BMS will cut off output. Recharge the battery promptly.
- Overcurrent/Short Circuit Protection: If excessive current is drawn or a short circuit occurs, the BMS will cut off output. Identify and resolve the cause of the overcurrent or short circuit before reconnecting.
- Overtemperature Protection: If the battery temperature exceeds safe limits, the BMS will stop operation. Allow the battery to cool down in a well-ventilated area.
9. User Tips
- Initial Charge: Batteries often arrive partially charged (e.g., 13.1V-13.3V). It is recommended to fully charge the battery before its first use.
- Charger Compatibility: For optimal performance and lifespan, use a charger specifically designed for LiFePo4 batteries. If you need recommendations for a 100Ah battery charger, consult the seller.
- Address Accuracy: When ordering, double-check your shipping address details, including house and apartment numbers, to ensure smooth delivery.
- Packaging: The battery typically comes in a cardboard box with protective polypropylene inserts. Inspect the packaging upon arrival for any signs of damage.
10. Warranty and Support
The PowMr LiFePo4 battery comes with a 5-year warranty and has a design life of 10 years, offering reliable performance for an extended period.
For more detailed information, including performance curves and additional technical data, please refer to the official user manual PDF: