1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MEKEDE 6.25-inch Motorcycle Portable Navigation GPS. This device offers advanced features such as wireless CarPlay and Android Auto, dual Bluetooth connectivity, dual 1080P recording (for models with recorder), and an IP67 waterproof rating, ensuring a safe and connected riding experience.

Figure 1: MEKEDE 6.25-Inch Motorcycle Navigation GPS Key Features
2. Safety Information
- Ensure all wiring connections are secure and properly insulated to prevent short circuits or damage.
- Do not reverse the connection of power cables; incorrect wiring may damage the device or prevent it from turning on/displaying.
- This 6.25-inch motorcycle navigation device does not support motorcycle voltages exceeding 30V. Verify your motorcycle's voltage before installation.
- Always prioritize safe riding. Do not operate the device in a way that distracts you from the road.
- If the screen becomes unresponsive, confirm that the screen lock is not enabled.
3. Product Overview
3.1. Device Dimensions

Figure 2: Device Dimensions (164mm x 83mm x 35mm)
3.2. Components and Controls
The device features a 6.25-inch touch screen display and an external control unit with physical buttons for safe operation while driving.

Figure 3: Device with Physical Buttons and Dual Camera Support
| No. | Component/Button | Function (Short Press) | Function (Long Press) |
|---|---|---|---|
| 1 | Light Sensor | NA | NA |
| 2 | Microphone receiving hole | NA | NA |
| 3 | TF Card slot hole | NA | NA |
| 4 | Cycle button | Enter rear view interface / Return to previous interface (CP mode only: Answer phone) | 10 seconds to power off |
| 5 | Camera button | One-click capture (CP mode only: Hang up phone) | 3 seconds to lock video |
| 6 | Main interface button | Enter main interface / mobile phone interconnection interface | 5 seconds to close/open touch function |
Figure 4: Detailed Button Functions
4. Setup
4.1. TF Card Installation
Insert a C10 32G-256G TF card into the TF Card slot (3). Format it in the host settings before initial use.
Video 1: Demonstrates TF card insertion and basic device operation.
4.2. Wiring and Power Connection
Connect the device to your motorcycle's power supply. Ensure all wiring is secure and correctly connected. The device is designed for direct wiring, eliminating battery replacement concerns.

Figure 5: Example of wiring connections (refer to specific motorcycle manual for detailed wiring).
4.3. Camera Installation (If applicable)
If your model includes dual cameras, install them according to your motorcycle's setup. The device supports 1080P ultra HD cameras for recording and night vision.

Figure 6: Dual HD Camera Support
5. Operating Instructions
5.1. Wireless CarPlay / Android Auto Connection
When the device is powered on, it will attempt to automatically connect to the last paired phone. For initial setup:
- Open your mobile phone's Bluetooth settings.
- Search for the device's Bluetooth name (e.g., "MT02-4B99").
- Connect to the device and follow any on-screen prompts to allow CarPlay or Android Auto access.
- For Android Auto, ensure your phone is Android 11 or above and supports 5G WiFi. Do not enable VPN on your phone during screen mirroring.

Figure 7: CarPlay and Android Auto Wireless Connection
5.2. Dual Bluetooth Channels
The device supports dual Bluetooth channels, allowing you to connect your phone for CarPlay/Android Auto and simultaneously connect to a Bluetooth headset, helmet, or other BT audio device for music, calls, and navigation audio.

Figure 8: Dual Bluetooth Connectivity
5.3. Navigation
Utilize navigation applications like Google Maps, Waze, or TomTom Go through CarPlay or Android Auto for turn-by-turn directions and route planning.

Figure 9: Navigation App Display
5.4. Dual Camera Recording (Models with Recorder)
The device supports seamless loop recording with dual 1080P HD cameras. You can capture high-definition video and photos of your journey.

Figure 10: Seamless Loop Recording Feature
5.5. Real-time Camera View and Video Download
Connect to the device's WiFi to view real-time camera images and download recordings via a wireless mobile app. The app allows you to manage your recorded footage directly from your phone.

Figure 11: Real-time Camera View and App Download
6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the screen and device body. Avoid harsh chemicals or abrasive materials.
- TF Card Management: Regularly format your TF card through the device settings to ensure optimal recording performance and prevent data corruption.
- Firmware Updates: Check the manufacturer's website (www.mekede.com) for any available firmware updates to improve performance and add new features.
7. Troubleshooting

Figure 12: Usage Precautions
- Device does not turn on/display: Check all wiring connections for tightness and correct polarity. Ensure the motorcycle voltage does not exceed 30V.
- No sound during CP/AA navigation: If using CarPlay/Android Auto navigation, ensure sound is transmitted through Bluetooth earphones or a connected BT audio device.
- Screen unresponsive: Confirm that the screen lock function is not enabled. Long press the Main interface button (6) for 5 seconds to toggle touch function.
- Connection issues with CarPlay/Android Auto: Ensure your phone's Bluetooth is on and correctly paired. For Android Auto, verify your phone is Android 11+ and supports 5G WiFi, and that no VPN is active during screen mirroring.
- General usage issues: Try resetting the device or restoring to factory settings through the system menu.
8. Specifications
- Screen Size: 6.25 inches
- Operating System: Linux system
- Connectivity: Dual Bluetooth channels, WiFi support
- Features: Wireless CarPlay, Wireless Android Auto, GPS Navigation support
- Waterproof Rating: IP67 (dustproof, shockproof, durable, rustproof, rain exposure and immersion tested)
- Recording (for models with recorder): Dual 1080P ultra HD camera recording, seamless loop recording, starry night vision, full color at night.
- Storage: Supports TF card (C10 32G-256G recommended)
- Brightness Control: Automatic/manual adjustment
- Dimensions: Approximately 164mm (L) x 83mm (W) x 35mm (H)

Figure 13: Key Features and Specifications Summary
9. User Tips
- For the best experience with CarPlay/Android Auto, ensure your phone's operating system is up to date.
- If you experience any lag or connectivity issues, try restarting both your phone and the navigation device.
- The IP67 waterproof rating makes the device suitable for harsh outdoor environments, but avoid prolonged submersion or high-pressure water jets.
- Regularly check the camera view to ensure proper functioning, especially if you rely on the recording feature for safety.
10. Warranty and Support
Your MEKEDE Motorcycle Portable Navigation GPS comes with a 365-day free replacement warranty, subject to terms and conditions.

Figure 14: Warranty Information
For any questions, technical assistance, or after-sales service, please contact MEKEDE directly through their official website: www.mekede.com.