Introduction
Thank you for choosing the Cada Snap Together Remote Control Car Building Blocks. This product combines the fun of building blocks with the excitement of a remote-controlled vehicle, offering an engaging experience for children aged 6 and above. It features dual-mode control (remote and app) and supports Scratch programming, fostering logical thinking and problem-solving skills. Constructed from high-quality, durable plastic, this racing car is designed for longevity and hours of creative play.

Image: Cada green sports car building blocks, showcasing dual-mode control via physical remote and smartphone app with Scratch programming interface.
Safety Information
- This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
- Adult supervision is recommended during assembly and play.
- Do not operate the car near water or in wet conditions to prevent electrical damage.
- Ensure batteries are inserted with correct polarity. Do not mix old and new batteries, or different types of batteries.
- Remove batteries from the car and remote control when not in use for extended periods.
- Do not attempt to modify or disassemble the electronic components of the car or remote control.
Package Contents
Please check the package to ensure all components are present:
- Building block pieces for the sports car (Model C51306: 432 pieces)
- Remote Control unit
- Smart chassis module (includes motor and battery compartment)
- Rechargeable Battery (3.7V 500mAh) for the car
- USB Charging Cable
- Instruction Manual (this document)
- Sticker sheet for car details
Note: AA 1.5V x2 batteries for the remote control are NOT included and must be purchased separately.
Assembly Instructions
The Cada Snap Together Remote Control Car is a building block set that requires assembly. Detailed step-by-step instructions are provided in the physical assembly manual included in your package. Please follow these instructions carefully to ensure correct construction and functionality.
- Unpack: Carefully open the package and sort the building block pieces. It is recommended to organize pieces by color and type to facilitate assembly.
- Follow Manual: Refer to the dedicated assembly manual for visual guides and sequential steps. Each step will illustrate which blocks to connect and where.
- Chassis Assembly: Pay close attention to the assembly of the smart chassis module (bottom plate), as this houses the motor and battery. Ensure all connections are secure.
- Electronic Connections: Connect the car's rechargeable battery to the smart chassis module as instructed.
- Final Touches: Apply any included stickers to enhance the car's appearance as shown in the manual or product images.

Image: Smart chassis module, the base for the building block car, highlighting its structural importance.

Image: Detailed view of the Cada sports car, highlighting key features like the Impact Rear Wing, Fighter Cockpit, Realistic Car Lights, Side Air Intake, Racing Wheel Hub, Front Air Intake, Fighter Style Cockpit, and Large Surround Wheel Arch.
Operating Instructions
1. Battery Installation and Charging
- Car Battery: Connect the included 3.7V 500mAh rechargeable battery to the smart chassis module. Use the provided USB charging cable to charge the car's battery. A full charge typically takes 1-2 hours. The indicator light on the cable will change when charging is complete.
- Remote Control Batteries: Open the battery compartment on the remote control and insert 2 x AA 1.5V batteries, ensuring correct polarity (+/-). Close the compartment securely.
2. Powering On/Off
- Car: Locate the power switch on the car's chassis and slide it to the 'ON' position.
- Remote Control: Press the power button on the remote control to turn it on.
3. Remote Control Operation (2.4G Mode)
The physical remote control allows for direct manipulation of the car's movement.
- Pairing: Turn on the car and then the remote control. They should automatically pair. If not, turn both off and on again.
- Forward/Backward: Use the left joystick/button to move the car forward or backward.
- Left/Right: Use the right joystick/button to steer the car left or right.
- Range: The remote control has a range of approximately 25 meters.

Image: Multi-mode gameplay options, illustrating both App Bluetooth control and 2.4G remote control modes.
4. App Control Operation (Bluetooth)
For advanced control and programming, download the dedicated app.
- Download App: Search for and download the 'kart smart+' app from your device's app store.
- Connect via Bluetooth: Ensure Bluetooth is enabled on your smartphone/tablet. Open the 'kart smart+' app and follow the on-screen instructions to connect to your Cada car via Bluetooth.
- Control Modes: The app offers various control modes, including:
- Remote Control Mode: Virtual joysticks for basic movement.
- Gyroscope Mode: Control the car's action trajectory using your mobile phone's gravity sensor.
- Road Mode: Plan a driving route within the app, and the car will follow the programmed trajectory.

Image: App interface demonstrating Gyroscope mode operation, where vehicle movement is controlled by tilting the device.

Image: App interface for Road mode operation, where users can plan a driving route for the car to follow.
5. Scratch Programming
The 'kart smart+' app also features an intuitive Scratch-based programming interface.
- Access Programming: Within the app, navigate to the programming section.
- Drag-and-Drop Blocks: Use the horizontal graphical programming interface to drag and drop command modules.
- Combine Commands: Combine various blocks (e.g., forward, turn, loop, pause) to create sequences of actions for your car.
- Test and Run: After creating your program, use the 'Save and Run' function to execute the commands and observe your car's programmed movements.

Image: App interface demonstrating easy drag-and-drop block-based programming, allowing users to create custom command sequences for the car.

Image: The Cada RC car demonstrating its intelligent LED lights: headlights illuminate when moving forward, and taillights illuminate when reversing.
Maintenance
- Cleaning: Wipe the car and remote control with a dry, soft cloth. Do not use water or chemical cleaners.
- Storage: Store the product in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Always remove batteries from the remote control when not in use for extended periods. For the car's rechargeable battery, charge it periodically even if not in use to maintain battery health.
- Inspection: Periodically check for any loose or damaged building blocks and reattach or replace them as needed.
Troubleshooting
- Car not moving:
- Check if the car's power switch is ON.
- Ensure the car's battery is charged and properly connected.
- Verify that the remote control batteries are correctly installed and not depleted.
- Ensure the car and remote are paired (turn both off and on again).
- Remote control not responding:
- Replace remote control batteries.
- Ensure there are no obstructions between the remote and the car.
- Try re-pairing the remote and car.
- App not connecting via Bluetooth:
- Ensure Bluetooth is enabled on your device.
- Make sure the car is powered on.
- Restart the app and try connecting again.
- Ensure your device is within Bluetooth range of the car.
- Programming errors:
- Review your block sequence in the app for any logical errors or missing commands.
- Test small segments of your program to isolate the issue.
Specifications
| Feature | Detail |
|---|---|
| Product Name | Blade Racing Car |
| Model | C51306 |
| Age Recommendation | 6+ |
| Number of Pieces | 432 pcs |
| Car Battery | 3.7V 500mAh (Rechargeable) |
| Remote Control Battery | AA 1.5V x2 (Sold Separately) |
| Car Dimensions (L×W×H) | 31.2 × 16.8 × 16.8 cm |
| Package Size (L×W×H) | 38.0 × 7.5 × 28.0 cm |
| Remote Control Range | ≥25m |
| Car Speed | 5.5 km/h |

Image: Product Information table detailing specifications for the Cada Blade Racing Car, Model C51306.
User Tips
- For first-time users, start with the basic remote control functions before moving to app control and programming.
- When programming, begin with simple sequences and gradually add complexity as you become more familiar with the Scratch interface.
- Experiment with different driving paths in 'Road Mode' to see how the car responds to various turns and obstacles.
- Ensure a clear, open space for operation to maximize the remote control range and prevent collisions.
Warranty and Support
This product is designed for quality and durability. For any manufacturing defects or issues not covered by normal wear and tear, please contact the seller or manufacturer's customer support. Keep your proof of purchase for warranty claims.
For technical assistance, troubleshooting, or replacement parts, please refer to the contact information provided by your retailer or on the product packaging.