1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Beckhoff EL Series industrial modules, including models EL9410, EL3024, EL6021, EL5001, EL4008, and EL3314. Please read this manual thoroughly before using the product and keep it for future reference.
2. Safety Information
Always observe the following safety precautions to prevent personal injury and damage to the equipment:
- Ensure all power is disconnected before installation, wiring, or maintenance.
- Only qualified personnel should install, operate, and maintain these modules.
- Adhere to all local and national electrical codes and regulations.
- Do not operate the module if it is damaged or malfunctioning.
- Protect the module from moisture, dust, and extreme temperatures.
- The device is certified for use in environments with an ambient temperature range of 0 to +55°C (EX nA II T4 Ta 0...+55°C).
3. Product Overview
The Beckhoff EL Series modules are designed for industrial automation applications. The EL9410, specifically, is a Power Supply Unit Terminal with diagnostic capabilities, providing 24V DC power. Other modules in this series (EL3024, EL6021, EL5001, EL4008, EL3314) offer various functionalities within the Beckhoff EtherCAT I/O system.
These modules are constructed from durable plastic and are designed for reliable performance in demanding industrial environments.
4. Specifications
| Feature | Detail |
|---|---|
| Model Numbers | EL9410, EL3024, EL6021, EL5001, EL4008, EL3314 |
| Type (EL9410) | Power Supply Unit Terminal with diagnosis / 24V DC |
| Material | Plastic |
| Origin | Germany |
| Certifications | CE, UL Listed, EX nA II T4 Ta 0...+55°C |
| Operating Temperature | 0 to +55°C |
5. Installation
5.1 Mounting
These modules are typically mounted on a DIN rail within an industrial control cabinet. Ensure adequate space for ventilation and wiring.
5.2 Wiring (EL9410 Example)
Refer to the diagram below for proper wiring connections for the EL9410 Power Supply Unit Terminal. Always ensure power is disconnected before making any connections.

This diagram illustrates the connection points for the EL9410 module. Key connections include:
- Power (-Bus): Connection for the E-Bus power.
- 0V for E-Bus: Ground connection for the E-Bus.
- +24V for E-Bus: 24V DC power supply for the E-Bus.
- +24V: Main 24V DC input.
- 0V: Main ground input.
- Up: Unswitched power (if applicable).
- PE: Protective Earth ground.
For other EL series modules, consult their specific documentation for wiring details.
6. Operation
Once properly installed and wired, the EL series modules integrate into your Beckhoff EtherCAT system. The EL9410 power supply unit provides the necessary 24V DC power to the E-Bus and connected terminals. Diagnostic features allow for monitoring of the power supply status.
Refer to your Beckhoff system documentation for details on configuring and operating specific EL series modules within your control application.
7. Maintenance
The Beckhoff EL series modules are designed for minimal maintenance. However, regular checks are recommended:
- Visual Inspection: Periodically inspect modules for any signs of physical damage, loose connections, or overheating.
- Cleaning: Keep the modules free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
- Firmware Updates: Consult Beckhoff's official website for any available firmware updates for your specific modules to ensure optimal performance and security.
8. Troubleshooting
If you encounter issues with your EL series module, consider the following common troubleshooting steps:
- No Power:
- Check all 24V DC and ground connections as per the wiring diagram.
- Verify the external 24V DC power supply is functioning correctly.
- Ensure the E-Bus power connections are secure.
- Module Not Recognized by System:
- Confirm the module is correctly seated in its terminal block.
- Check the EtherCAT communication connections.
- Verify the system configuration matches the installed modules.
- Diagnostic Indicators:
- Consult the specific module's LED indicators (if present) and the Beckhoff documentation for their meaning.
- The EL9410 has diagnostic capabilities; refer to the system software for detailed diagnostic messages.
For persistent issues, contact Beckhoff technical support or a certified service provider.
9. Warranty and Support
These modules typically come with a 6-month warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For technical support, detailed product documentation, or service inquiries, please visit the official Beckhoff website or contact your local Beckhoff representative. Ensure you have the module's serial number (e.g., Ser.Nr.: 02140013) and revision number (e.g., Rev.Nr.: 0017) available when seeking support.