E-ACE B56P

Contents

E-ACE B56P 4K Dashcam User Manual

Your guide to safer driving and better living.

1. Introduction

The E-ACE B56P 4K Dashcam is a portable recorder designed to enhance your driving safety and provide reliable evidence in case of incidents. Featuring a 4K front camera and an optional 1080P rear camera, it captures high-quality video day and night. With built-in WiFi and GPS, you can easily track your journey and manage recordings via a mobile app. This manual provides detailed instructions for installation, operation, and maintenance of your dashcam.

E-ACE B56P 4K Dashcam with optional rear camera, GPS, and WiFi connectivity, shown with a smartphone displaying the companion app.

E-ACE B56P 4K Dashcam with optional rear camera, GPS, and WiFi connectivity, shown with a smartphone displaying the companion app.

2. Product Overview

2.1. Key Features

  • 4K Ultra HD Recording: Front camera records in 3840x2160@25FPS for cinematic clarity.
  • 1080P Rear Camera: Optional rear camera records in 1920x1080P@25FPS, also usable as an internal camera.
  • Super Night Vision & WDR: Enhanced low-light performance with F1.6 aperture and Sony IMX415 sensor.
  • Built-in WiFi: Connect to the "Viidure" mobile app for live view, playback, and file management.
  • Built-in GPS: Tracks driving location, speed, and trajectory, viewable on the app or GPS player.
  • 1.47-inch OLED Screen: Provides clear display with 4 switchable modes (Front, Rear, Standby, App QR code).
  • Loop Recording: Automatically overwrites oldest footage when the memory card is full.
  • G-Sensor: Detects sudden impacts and locks the current video to prevent overwriting.
  • 24H Parking Monitoring: Requires a hardwire kit for continuous surveillance (optional accessory).
  • Wide-Angle Lenses: 170° front and 140° rear for comprehensive road coverage.
Key features of the E-ACE B56P Dashcam, including Night Vision, G-Sensor, 4K+1080P recording, Viidure App, WiFi, GPS, Motion Detection, and Loop Recording.

Key features of the E-ACE B56P Dashcam.

2.2. Device Layout and Dimensions

Detailed diagram of the dashcam's dimensions and port locations, including Type-C, rear lens port, and memory card slot.

Detailed diagram of the dashcam's dimensions and port locations.

  • Power On/Off Button: Located on the side/end of the main unit.
  • Type-C Port: For power connection.
  • Rear Lens Port: For connecting the optional rear camera.
  • Memory Card Slot: For inserting the Micro SD card.
  • Front Lens: Main 4K recording camera.
  • Rear Lens (Optional): 1080P recording camera.

3. Package Contents

Please check the box for the following items:

  • 1 x Packaging box
  • 1 x DVR (Dashcam-B56P)
  • 1 x Electrostatic sticker
  • 1 x Power charger (Car charger)
  • 1 x User manual
  • 1 x USB Card Reader (Gift)
  • 1 x 1080P Sony Night Vision Rearview Camera With 6 Meters Cable (Optional)
  • 1 x 1080P Sony Night Vision Rearview Camera With 10 Meters Cable (Optional)
  • 1 x Real class10 High Speed TF Card (Optional)
Packaging list for the E-ACE B56P Dashcam, showing included accessories like the dashcam, power charger, electrostatic sticker, user manual, USB card reader, and optional rear camera/TF card.

Contents of the E-ACE B56P Dashcam package.

4. Specifications

FeatureSpecification
Model NumberB56P
Installation TypePortable Recorder
Chipset ManufacturerNOVATEK (96670)
Imaging SensorSONY IMX415
Pixels800Mega
Camera LensFront: 6 Glass; Rear: 4 Glass
View AngleFront: 170°; Rear: 140°
ApertureF1.6 (Front), F2.0 (Rear)
Video ResolutionFront: 3840x2160@25FPS; Rear: 1920x1080P@25FPS
Maximum Video Frame Rate25 FPS
Video CodeH.264
Video FormatTS
OSD LanguageEnglish, Russian, Dutch, French, Spanish, Portuguese, Italian, Chinese, Japanese, Korean, Polish, Thai, Vietnamese, etc.
Memory CardMicro SD Card, Class 10, 16GB to 256GB (Not included)
Max External Memory128G (Note: Product specs mention 256GB support, but max external memory is listed as 128G. Please verify with seller if needed.)
Power SourceCorded Electric
BatteryBuilt-In
Built-in ScreenYes (1.47 Inch OLED)
Touch ScreenNo
Screen Ratio16:9
APP CompatibilityYes (Viidure)
GPS LoggerExternal
Special FeaturesG-Sensor, Digital zoom, SD/MMC card, Radar Detector, Anti Surge Voltage Impact, Waterproof, Anti Fog, Anti Vibration, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, WiFi function, Parking Monitor, Speed and Coordinates Recording, External GPS
CertificationCE

5. Installation Guide

5.1. Dashcam Placement

  1. Clean the area on your windshield where you intend to mount the dashcam.
  2. Attach the electrostatic sticker to the windshield first, then mount the dashcam onto the sticker. This allows for easier removal without leaving residue.
  3. Ensure the dashcam's front lens has a clear view of the road and does not obstruct your driving vision.
  4. Connect the power cable to the dashcam's Type-C port.
Diagram illustrating the 1.47-inch OLED screen display modes and controls, including front view, rear view, standby, and app QR code.

Dashcam placement and screen modes.

5.2. Power Connection (Hardwire Kit for 24H Parking Monitoring)

For 24-hour parking monitoring, a hardwire kit is required. This kit connects directly to your car's fuse box, allowing the dashcam to draw power even when the ignition is off, without occupying the cigarette lighter interface.

Important: The DVR is only compatible with cars that have a 12V power supply. A 24V power supply will burn the motherboard. If your vehicle uses 24V, you must use a 24V to 12V converter. Please use E-ACE's customized specifications for the KIT, as those from other companies may not be compatible.

Follow these steps to install the hardwire kit:

  1. Locate your car's fuse box.
  2. Identify two fuse slots:
    • One that provides constant power (for the RED wire). This fuse should be active even when the car is off.
    • One that only provides power when the key is in the ACC position (for the YELLOW wire). This fuse should be active when the car is on.
  3. Connect the RED wire of the hardwire kit to the constant power fuse slot.
  4. Connect the YELLOW wire of the hardwire kit to the ACC power fuse slot.
  5. Connect the BLACK wire to a grounding screw or bolt on the car's chassis.
Detailed wiring diagram for the hardwire kit, showing connections for GND (Negative), ACC (Positive), and BAT (Constant Power) to the car's fuse box.

Hardwire kit wiring diagram for 24H parking monitoring.

5.3. Rear Camera Installation (Optional)

If you have purchased the optional rear camera:

  1. Connect the rear camera cable to the rear lens port on the main dashcam unit.
  2. Route the cable neatly along the car's interior trim to the desired location for the rear camera.
  3. Mount the rear camera in a position that provides a clear view, typically on the rear windshield or inside the cabin if used as an internal camera.

6. Operating Instructions

6.1. Power On/Off

Long press the power on/off button to boot the device. The dashcam will automatically start recording when powered on.

6.2. Recording Modes

  • Continuous Recording: The dashcam records continuously in 4K (front) and 1080P (rear) resolutions.
  • Loop Recording: When the memory card is full, the oldest unlocked files will be overwritten by new recordings.
  • G-Sensor: In the event of a sudden impact or emergency, the G-Sensor will automatically trigger, locking the current video file to prevent it from being overwritten.
  • Parking Monitor: With the hardwire kit installed, the dashcam can monitor your vehicle for impacts while parked. If an impact is detected, it will automatically turn on and record.
Infographic detailing additional features: Loop Recording, Parking Monitor, G-Sensor, and WDR Dynamic Light Processing.

Additional features: Loop Recording, Parking Monitor, G-Sensor, WDR.

6.3. Night Vision and WDR

The dashcam features Super Night Vision and Wide Dynamic Range (WDR) processing to ensure clear recordings even in low-light conditions or at night. The F1.6 aperture and Sony IMX415 sensor contribute to high-definition picture quality and bright recordings.

Illustration of Super Night Vision and Wide Dynamic Range (WDR) features, showing improved visibility in low-light conditions.

Super Night Vision and WDR for enhanced low-light recording.

6.4. WiFi Function and Mobile App (Viidure)

The dashcam supports WiFi connectivity, allowing you to connect it to your smartphone via the "Viidure" app (available for Android and Apple phones).

  1. Download and install the "Viidure" app from your phone's app store.
  2. On the dashcam, switch to the "Connect WIFI mode" display (usually by pressing a side button). An App QR code will be displayed.
  3. On your phone, connect to the dashcam's WiFi network (SSID and password usually found on the dashcam screen or in the manual).
  4. Open the "Viidure" app. You can now view real-time video, take photos, watch recorded videos, and download files directly to your phone.
Demonstration of WiFi control, showing the dashcam connected to a smartphone via the Viidure app for live viewing and control.

Connecting the dashcam to the Viidure app via WiFi.

Screenshot of the Viidure app interface, showing options for taking photos, watching videos, app control, and downloading files.

Viidure app interface for managing recordings.

6.5. GPS Functionality

The external GPS module accurately logs your vehicle's location, speed, latitude, longitude, and route. This information can be viewed on Google Maps via the Viidure app or a compatible GPS player on your computer.

  1. Ensure the external GPS module is connected to the dashcam.
  2. When connecting for the first time, allow some time for the GPS module to acquire a signal and locate. The GPS icon on the dashcam screen will change from red to green once positioning is successful.
  3. After successful positioning, log in to the Viidure mobile app to view your driving track and speed.
Illustration of GPS connection status, with the icon changing from red to green upon successful positioning, and viewing tracks on the mobile app.

GPS connection status and track viewing on the app.

6.6. Screen Display Modes

The 1.47-inch OLED screen offers four display modes, which can be cycled through by pressing the corresponding button on the dashcam:

  • Front view
  • Rear view
  • Standby mode
  • App QR code

7. Maintenance

  • Cleaning the Lenses: Regularly clean the front and rear camera lenses with a soft, lint-free cloth to ensure clear recordings. Avoid using abrasive cleaners.
  • Memory Card Care: Periodically format your Micro SD card (e.g., once a month) to maintain optimal performance and prevent data corruption. Back up any important recordings before formatting.
  • Firmware Updates: Check the E-ACE official website or the Viidure app for any available firmware updates to ensure your dashcam has the latest features and bug fixes.
  • Storage Conditions: Avoid exposing the dashcam to extreme temperatures or direct sunlight for prolonged periods when not in use.

8. Troubleshooting

  • Dashcam not recording or freezing:
    • Ensure you are using a high-quality Class 10 Micro SD card (16GB to 256GB). Low-quality or slow cards can cause recording issues.
    • Format the Micro SD card regularly.
    • Check if the memory card is full and loop recording is not enabled or functioning correctly.
  • Dashcam not powering on or shutting down unexpectedly:
    • Verify the power connection. Ensure the power charger or hardwire kit is securely connected.
    • Confirm your car's power supply is 12V. If it's 24V, a 24V to 12V converter is essential to prevent damage.
  • GPS not tracking or icon remains red:
    • Ensure the external GPS module is properly connected.
    • Allow sufficient time (a few minutes) for the GPS module to acquire a signal, especially during the first use or after a long period of inactivity. Ensure the vehicle is in an open area.
  • WiFi connection issues with the app:
    • Make sure the dashcam is in "Connect WIFI mode".
    • Verify you are connected to the correct dashcam WiFi network on your phone.
    • Restart both the dashcam and your phone, then try connecting again.
  • Rear camera not displaying or recording:
    • Ensure the rear camera cable is securely connected to the main unit.
    • Only E-ACE original rear cameras are guaranteed to be compatible with this dashcam due to chipset and sensor differences.

9. User Tips

  • For optimal video quality, especially at night, ensure your windshield is clean and free of smudges or obstructions.
  • Consider regularly backing up important footage to a computer or cloud storage to prevent accidental loss.
  • When installing the hardwire kit, double-check the fuse connections to ensure constant power and ACC power are correctly identified to avoid draining your car battery or damaging the device.

10. Warranty and Support

The E-ACE B56P Dashcam comes with a 365-day warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the E-ACE customer service team.

Please retain your proof of purchase for warranty validation.

Official product demonstration video for the E-ACE B56P 4K Dashcam, showing installation, app connectivity, and sample footage.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.