Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Annke 1080P TVI Security Camera System. This system features an 8-channel DVR with audio recording capabilities and weatherproof conch cameras, designed for comprehensive outdoor and indoor surveillance. Key features include 24/7 recording, advanced motion detection, H.265 video compression, and motion-triggered color night vision.
What's in the Box?

- 1 x DVR (Digital Video Recorder)
- 4 x Cameras
- 2 x Power Supply
- 4 x 60 ft BNC Cable
- 1 x 1-to-4 Splitter Cable
- 1 x HDMI Cable
- 1 x Network Cable
- 1 x Wall Sticker
- 1 x User Manual
- 4 x Screws
- 1 x USB Mouse
Specifications
DVR Specifications
| Category | Feature | Specification |
|---|---|---|
| Video & Audio | Video Compression | H.265 Pro/H.265/Scene-Adaptive Bitrate Control coding |
| Video Input | 8CH Analog HD/Analog + 2CH IP (each up to 5 Mbps) | |
| Video Output | HDMI/VGA up to 1080p/60 Hz | |
| Audio Input/Output | 8-ch via coaxial cable/1-ch via HDMI | |
| Supported Camera Types | 1) TVI Input: 3K@20fps, 5MP@20fps, 4MP@30/25fps, 1080p@30/25fps, 720p@60/50/30/25fps | |
| 2) AHD Input: 5MP@20fps, 4MP@30/25fps, 1080p@30/25fps, 720p@30/25fps | ||
| 3) CVI Input: 5MP@20fps, 4MP@30/25fps, 1080p@30/25fps, 720p@30/25fps | ||
| 4) CVBS Support | ||
| Analog HD Playback Resolution | Main stream: 5MP Lite@12fps; 4MP Lite/1080p@15fps; 720p/WD1/4CIF/VGA/CIF@20fps (for 5MP stream access). 1080p/720p@15fps (for 1080p stream access). 720p/WD1/4CIF@25fps (P)/30fps (N) (for 720p stream access). 1080p Lite mode enabled: 5MP/3K Lite@12fps; 4MP Lite/@15fps; 1080p Lite/720p/WD1/4CIF@25fps (P)/30fps (N) | |
| IP Camera Input | 2-CH | |
| IPC Recording Resolution | Up to 6MP | |
| IPC Playback Resolution | Up to 6MP | |
| Max Playback Channel | 4CH | |
| Motion Detection 2.0 (Human/Vehicle Analysis) | Up to 8CH, Deep learning-based motion detection 2.0 is enabled by default for all analog channels, it can classify human and vehicle, and extremely reduce false alarms caused by objects like leaves and lights | |
| ONVIF | Support | |
| Network | Total Bandwidth | 96 Mbps, Incoming bandwidth: 8 Mbps |
| Remote Connection | 64 | |
| Network Protocol | TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, UPnP™, HTTPS | |
| Network Interface | 1, RJ45 10/100 Mbps self-adaptive Ethernet interface | |
| Hard Drive | SSD | Built-in eSSD |
| SSD Capacity | Built-in 1024 GB eSSD (960 GB available). Note: The device can store about 2 weeks videos for 8-ch analog cameras (default parameters), this estimation is for reference only. | |
| Auxiliary Interface | USB | USB 2.0 X2 |
| General | Working Temperature | 14 °F – 113 °F (-10 °C – 45 °C) |
| Dimensions (W x D x H) | 172 X 121.6 X 46 mm (6.7x4.79x1.81 inch) | |
| Weight | ≤0.5Kg (1.1lb.) With eSSD | |
| Operating Power | DC12V, 1A, ≤ 8.2 W (With eSSD) |
Analog HD Camera Specifications
| Category | Feature | Specification |
|---|---|---|
| Camera | Image sensor | 2MP CMOS Image sensor |
| Video Resolution | 1920 (H) × 1080 (V) | |
| Signal System | PAL/NTSC | |
| Frame Rate | TVI: 1080P @ 30 fps, 1080P @ 25 fps | |
| Lens | 3.6mm | |
| Min. Illumination | Color:0.01 Lux @ (F1.2,AGC ON),0 Lux with IR | |
| Angle of View | Horizontal FOV: 78°, vertical FOV: 42°, diagonal FOV: 92° | |
| Supplement Light type | White Light & IR | |
| Supplement Light Range | IR : Up to 20 m, white Light : Up to 20 m | |
| Supplement Light Mode | IR light works normally, and it switches to white light when human or vehicle are detected at night. | |
| Wide Dynamic Range | Digital WDR | |
| IR Cut Filter | Yes | |
| Video Output | BNC, switchable TVI/AHD/CVI/CVBS | |
| General | Housing | Metal&Plastic |
| Color | Black | |
| Operating Power | DC12V | |
| Operating Temperature | -40 °F – 140 °F (-40 °C – 60 °C) | |
| Indoor/Outdoor | Indoor/Outdoor | |
| Weatherproof Rating | IP67 | |
| Dimension (L x W x H) | Ø85 mm × 84.6 mm (3.35" × 3.33 ") | |
| Weight | Approx. 205 g (0.45 lb.) |
Setup Guide
Follow these steps to set up your Annke security camera system:
- Unpack and Identify Components: Refer to the 'What's in the Box?' section to ensure all components are present.
- Connect Cameras to DVR: Use the provided BNC cables to connect each camera to the corresponding video input ports on the back of the DVR. The system supports TVI, AHD, CVI, CVBS, and IPC inputs.
- Connect DVR to Monitor: Use the HDMI or VGA cable to connect the DVR to a monitor or TV for local viewing and configuration.
- Connect Power: Connect the power adapters to the DVR and each camera, then plug them into a power outlet.
- Connect Network (Optional but Recommended): Connect the DVR to your router using the provided Ethernet cable for remote viewing and notifications.
- Initial Boot-up: Power on the DVR. Follow the on-screen prompts for initial setup, including language, time zone, and password creation.


Operating Instructions
24/7 Continuous Recording
The DVR is equipped with a built-in 1024 GB eSSD, providing continuous recording for approximately 2 weeks with 8 analog cameras (default parameters). For a 4-camera setup, this can extend to about 4 weeks of recording.

Upgraded Motion Detection 2.0
Leverage deep learning-based Motion Detection 2.0 for all analog channels. This feature accurately classifies human and vehicle movements, significantly reducing false alarms triggered by environmental factors like leaves or lights. When motion is detected, the system can send App Push notifications, emails, or trigger a buzzer alarm.

H.265-based Smart iBitrate Control
The system utilizes H.265 video compression with scene-adaptive bitrate control. This intelligent technology optimizes video quality while minimizing file size, allowing you to save more storage space and record for longer durations without compromising clarity.

Motion-Triggered Color Night Vision
Experience enhanced night surveillance with motion-triggered color night vision. The cameras provide clear, bright night imaging up to 20 meters using IR light, and can switch to white light for full-color vision when human or vehicle motion is detected, offering superior detail compared to traditional black and white night vision.

Remote Monitoring
Monitor your property from anywhere using the dedicated mobile application. The system supports remote viewing on iPhone, iPad, and Android devices, allowing you to access live feeds, playback recordings, and receive alerts on the go.
Maintenance
- Camera Cleaning: Regularly clean the camera lenses with a soft, damp cloth to ensure clear image quality. Avoid abrasive cleaners.
- DVR Ventilation: Ensure the DVR is placed in a well-ventilated area to prevent overheating. Do not block ventilation openings.
- Firmware Updates: Check the manufacturer's website periodically for firmware updates to ensure optimal performance and security.
- Cable Management: Periodically inspect all cables for wear and tear. Ensure connections are secure and protected from environmental damage.
Troubleshooting
- No Video Display:
- Check all power connections to the DVR and cameras.
- Ensure video cables (BNC, HDMI, VGA) are securely connected.
- Verify the monitor input source is correctly selected.
- Poor Image Quality:
- Clean camera lenses for dirt or obstructions.
- Check cable integrity; damaged cables can degrade signal.
- Ensure cameras are within their optimal operating range and lighting conditions.
- Motion Detection Not Working/False Alarms:
- Verify motion detection settings in the DVR menu.
- Adjust sensitivity levels to suit your environment.
- Ensure detection zones are correctly configured and exclude areas with constant movement (e.g., trees swaying).
- Remote Viewing Issues:
- Ensure the DVR is connected to the internet and has a stable connection.
- Check network settings on the DVR and your router.
- Verify your mobile device has internet access and the Annke app is up to date.
User Tips
- Optimize Motion Detection: Fine-tune your motion detection zones and sensitivity to focus on critical areas and minimize unnecessary alerts.
- Leverage Color Night Vision: Position cameras where motion is likely to occur to take full advantage of the motion-triggered color night vision feature for better identification at night.
- Secure Your System: Always use strong, unique passwords for your DVR and mobile app accounts to protect your privacy and security.
- Regularly Review Footage: Periodically check recorded footage to ensure cameras are capturing the desired areas and that image quality remains optimal.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Annke website or contact their customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.