1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Annke 2MP Outdoor Security Camera System. This system is designed to provide reliable surveillance with advanced features such as 2MP HD resolution, smart human/vehicle detection, dual light night vision, and IP67 weatherproof cameras, all managed by an efficient 8-channel DVR with eSSD storage.
2. What's in the Box?
Please verify that all components are present in your package:
Figure 1: Package Contents
- 1 x DVR Unit
- 4 x 2MP HD Cameras
- 2 x Power Supplies
- 4 x 60 ft BNC Cables
- 1 x 1-to-4 Splitter Cable
- 1 x HDMI Cable
- 1 x Network Cable
- 1 x Wall Sticker
- 1 x User Manual (this document)
- 4 x Screws
- 1 x USB Mouse
3. Setup
Follow these steps to set up your Annke security camera system:
- **Connect Cameras to DVR**: Use the provided BNC cables to connect each camera to the corresponding video input ports on the DVR.
- **Power the Cameras**: Connect the cameras to the power supplies using the 1-to-4 splitter cable.
- **Connect DVR to Display**: Use the HDMI cable to connect the DVR to a monitor or TV.
- **Connect DVR to Network**: Connect the DVR to your router using the network cable for remote viewing capabilities.
- **Power the DVR**: Connect the DVR to its power supply.
- **Connect USB Mouse**: Plug the USB mouse into one of the DVR's USB ports for navigation.
- **Initial Boot-up**: Power on the DVR. Follow the on-screen instructions for initial setup, including setting up a password and configuring network settings.
The DVR supports various camera types, offering versatile compatibility:
Figure 2: 5-in-1 DVR Compatibility
Figure 3: Annke Security System Overview
4. Operating Instructions
4.1. Motion Detection 2.0
The system features an upgraded Motion Detection 2.0, utilizing deep learning-based algorithms to accurately classify human and vehicle movements. This significantly reduces false alarms triggered by non-relevant objects like leaves or changes in lighting.
Figure 4: Smart Human/Vehicle Detection
4.2. Night Vision
The cameras are equipped with dual light technology, offering both IR (infrared) and white light for night vision. IR light provides clear black-and-white imaging in complete darkness. When human or vehicle motion is detected at night, the cameras can automatically switch to white light, enabling motion-triggered color night vision for enhanced detail.
Figure 5: Motion-Triggered Color Night Vision
4.3. Recording
The DVR supports 24/7 continuous recording. With its built-in 1024 GB eSSD, the system can store approximately 2 weeks of continuous video for 8-channel analog cameras (default parameters). The system uses H.265-based Smart iBitrate Control, which adapts the bitrate to the scene, optimizing storage space without compromising video quality.
Figure 6: 24/7 Recording Capability
Figure 7: Smart iBitrate Control
4.4. Remote Monitoring
The system supports remote monitoring via iPhone, iPad, and Android mobile devices. Download the official Annke app from your device's app store and follow the in-app instructions to connect to your DVR for live viewing and playback from anywhere.
5. Maintenance
To ensure optimal performance and longevity of your security system, regular maintenance is recommended:
- **Camera Cleaning**: Periodically clean the camera lenses with a soft, damp cloth to remove dust, dirt, or smudges that may obstruct the view. Avoid harsh chemicals.
- **Cable Inspection**: Check all cables (BNC, power, network) for any signs of wear, damage, or loose connections. Secure any loose connections.
- **DVR Ventilation**: Ensure the DVR unit has adequate ventilation to prevent overheating. Keep the area around the DVR clear of obstructions.
- **Firmware Updates**: Check the manufacturer's website periodically for firmware updates for your DVR and cameras. Updates can improve performance, add features, and enhance security.
The cameras are IP67 weatherproof, designed to withstand extreme temperatures and harsh weather conditions, making them suitable for both indoor and outdoor installation.
Figure 8: IP67 Weatherproof Camera
6. Troubleshooting
If you encounter issues with your Annke security system, consider the following common troubleshooting steps:
- **No Video/Black Screen**: Check all power connections to the cameras and DVR. Ensure video cables (BNC, HDMI) are securely connected. Verify the correct input source is selected on your monitor/TV.
- **No Remote Access**: Ensure the DVR is connected to the internet and has a stable network connection. Check your router settings and firewall to ensure necessary ports are open. Verify app settings and login credentials.
- **Poor Image Quality**: Clean camera lenses. Check cable connections for interference. Ensure cameras are within their effective range and not facing direct strong light sources.
- **Motion Detection Issues**: Review motion detection settings in the DVR menu. Adjust sensitivity and detection zones. Ensure cameras are positioned correctly to cover desired areas.
- **DVR Not Recording**: Check the eSSD status in the DVR settings. Ensure there is sufficient storage space. Verify recording schedules are correctly configured.
If problems persist, consult the comprehensive user manual (if a PDF version is available) or contact Annke customer support for further assistance.
7. Specifications
7.1. DVR Specifications
| Category | Feature | Specification |
|---|---|---|
| Video & Audio | Video Compression | H.265 Pro/H.265/Scene-Adaptive Bitrate Control coding |
| Video Input | 8CH Analog HD/Analog + 2CH IP (each up to 5 Mbps) | |
| Video Output | HDMI/VGA up to 1080p/60 Hz | |
| Audio Input/Output | 8-ch via coaxial cable/1-ch via HDMI | |
| Supported Camera Types | 1) TVI Input | 3K@20fps, 5 MP@20 fps, 4MP@30/25fps, 1080p@30/25 fps, 720p@60/50/30/25 fps |
| 2) AHD Input | 5 MP@20 fps, 4MP@30/25fps, 1080p@30/25 fps, 720p@30/25 fps | |
| 3) CVI Input | 5 MP@20 fps, 4MP@30/25fps, 1080p@30/25 fps, 720p@30/25 fps | |
| 4) CVBS | Support | |
| Analog HD Playback Resolution | Main stream: When 1080p Lite mode not enabled: For 5 MP stream access: 5 MP Lite@12 fps; 4 MP Lite/1080p@15 fps; 720p/WD1/4CIF/VGA/CIF@20 fps. For 1080p stream access: 1080p/720p@15 fps; WD1/4CIF@25 fps (P)/30 fps (N). For 720p stream access: 720p/WD1/4CIF@25 fps (P)/30 fps (N). When 1080p Lite mode enabled: 5 MP/3K Lite@12 fps; 4 MP Lite/@15 fps; 10080p Lite/720p/WD1/4CIF@25 fps (P)/30fps (N) | |
| IP Camera Input | 2-CH | |
| IPC Recording Resolution | Up to 6MP | |
| IPC Playback Resolution | Up to 6MP | |
| Max Playback Channel | 4CH | |
| Motion Detection 2.0 (Human/Vehicle Analysis) | Up to 8CH, Deep learning-based motion detection 2.0 is enabled by default for all analog channels, it can classify human and vehicle, and extremely reduce false alarms caused by objects like leaves and lights | |
| ONVIF | Support | |
| Network | Total Bandwidth | 96 Mbps, Incoming bandwidth: 8 Mbps |
| Remote Connection | 64 | |
| Network Protocol | TCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, UPnP™, HTTPS | |
| Network Interface | 1, RJ45 10/100 Mbps self-adaptive Ethernet interface | |
| Hard Drive | SSD | Build in SSD |
| SSD Capacity | Built-in 1024 GB eSSD (960 GB available) Note: The device can store about 2 weeks videos for 8-ch analog cameras (default parameters), this estimation is for reference only. | |
| Auxiliary Interface | USB | USB 2.0 X2 |
| General | Working Temperature | 14 °F – 113 °F / -10 °C – 45 °C |
| Dimensions (W x D x H) | 172 X 121.6 X 46 mm (6.7x4.79x1.81inch) | |
| Weight | ≤0.5Kg (With eSSD, 1.1lb.) | |
| Operating Power | DC12V, 1A, ≤ 8.2 W (With eSSD) |
Figure 9: DVR Specifications
7.2. Camera Specifications
| Category | Feature | Specification |
|---|---|---|
| Camera | Image sensor | 2MP CMOS Image sensor |
| Video Resolution | 1920 (H) × 1080 (V) | |
| Signal System | PAL/NTSC | |
| Frame Rate | TVI: 1080P @ 30 fps, 1080P @ 25 fps | |
| Lens | 3.6mm | |
| Min. Illumination | Color: 0.01 Lux @ (F1.2, AGC ON), 0 Lux with IR | |
| Angle of View | Horizontal FOV: 78°, vertical FOV: 42°, diagonal FOV: 92° | |
| Supplement Light type | White Light & IR | |
| Supplement Light Range | IR : Up to 20 m, White Light : Up to 20 m | |
| Supplement Light Mode | IR light works normally, and it switches to white light when human or vehicle are detected at night. | |
| Wide Dynamic Range | Digital WDR | |
| IR Cut Filter | Yes | |
| Video Output | BNC, switchable TVI/AHD/CVI/CVBS | |
| General | Housing | Metal&Plastic |
| Color | White | |
| Operating Power | DC12V | |
| Operating Temperature | -40 °F – 140 °F / -40 °C – 60 °C | |
| Indoor/Outdoor | Indoor/Outdoor | |
| Weatherproof Rating | IP67 | |
| Dimension (L x W x H) | Ø85 mm × 84.6 mm (3.35" × 3.33 ") | |
| Weight | Approx. 205 g (0.45 lb.) |
Figure 10: Camera Specifications
8. User Tips
- **Energy Efficiency**: The eDVR technology reduces energy consumption by nearly 45%, contributing to a greener environment.
- **Compact Design**: The DVR unit is designed to be compact, making it easy to integrate into various spaces without taking up much room.
- **eSSD Technology**: Embrace the next generation eSSD technology for free installation, fewer mechanical problems, and lower power consumption compared to traditional hard drives.
Figure 11: Energy Saving with eDVR
Figure 12: Compact DVR Size
Figure 13: eSSD Technology Benefits
9. Warranty and Support
For warranty information and technical support, please refer to the official Annke website or contact their customer service directly. Keep your purchase receipt for warranty claims.