HGLRC SPECTER 25A AIO

Contents

HGLRC SPECTER 25A AIO Flight Controller Instruction Manual

Integrated AIO for HD/Analog VTX with Wireless Bluetooth Tuning

HGLRC SPECTER 25A AIO Flight Controller with MPU6000 Gyro

Image: HGLRC SPECTER 25A AIO Flight Controller, highlighting its MPU6000 Gyro for stable output.

Introduction

The HGLRC SPECTER 25A AIO is an advanced all-in-one flight controller designed for FPV drones, integrating a high-performance flight controller and a 25A ESC. It features a powerful STM32F722 MCU, MPU6000 gyroscope, and built-in Bluetooth for wireless parameter adjustment, offering a seamless and responsive flying experience for both HD and analog video transmission systems.

Features

  • High-Performance MCU: Equipped with an STM32F722 processor, operating at up to 216 MHz for smooth control and rapid response.
  • Stable Gyroscope: Utilizes the MPU6000 gyroscope for enhanced flight stability, with reserved 42688 gyroscope pads.
  • Integrated Black Box: Features a 16MB black box for comprehensive flight data recording.
  • Wireless Bluetooth Tuning: Built-in Betaflight (BF) wireless Bluetooth allows for convenient parameter adjustment (serial port, PID) via the SpeedyBee APP.
  • Versatile VTX Support: Supports both digital (e.g., DJI O3 Air Unit direct plug-in) and analog video transmission systems.
  • Robust ESC: Integrated 25A 4-in-1 ESC with Dshot300/600 support and Q-H-30-Bluejay firmware.

Specifications

ComponentSpecification
Flight Controller ModelHGLRC SPECTER 25A AIO
Flight Control FirmwareHGLRCF722AIOV2
ESC FirmwareQ-H-30-Bluejay
MCUSTM32F722
GyroscopeMPU6000
OSDAT7456E
BarometerDPS310
Black Box16MB
UARTs5 groups
Input Voltage11.1V-22.8V / 3-6S LIPO
BEC Output5V2A
Continuous ESC Output25A x 4
Peak ESC Output30A x 4 (< 10s)
PWM Frequency24-48k (Bluebird 96k)
Dimensions34x34x6.7mm
Installation Hole Position25.5x25.5mm, M2
Weight12.05g
ESC SupportDshot300/600
Flight Control Status IndicatorSupported
LED BB SoundSupported
Receiver JackSupported
Camera JackSupported
Digital/Analog VTX SocketSupported (Two-in-one)
GPS/Compass SupportSupported

Package Contents

The HGLRC SPECTER 25A AIO package includes the following items:

  • 1x HGLRC SPECTER 25A AIO Flight Controller
  • 1x 14AWG 100mm XT60 Power Cord
  • 1x 18AWG 70mm XT30 Power Cord
  • 1x 30AWG 70mm Double-ended SH1.0-6P DJI Cable
  • 1x 30AWG 75mm Single-headed 1.25-3P Camera Cable
  • 1x Accessory Kits (includes various connectors and mounting hardware)
Contents of the HGLRC SPECTER 25A AIO package, including the flight controller, various cables, and accessory kits.

Image: Visual representation of the HGLRC SPECTER 25A AIO and its included accessories.

Setup

Physical Installation

The HGLRC SPECTER 25A AIO features a standard 25.5x25.5mm mounting pattern with M2 holes. Ensure proper isolation from the frame to prevent short circuits and vibrations. Use the provided accessory kits for secure mounting.

Wiring Diagram

Refer to the detailed wiring diagram below for connecting your components. Always double-check connections before applying power.

Detailed wiring diagram for the HGLRC SPECTER 25A AIO flight controller, showing connections for battery, motors, receiver, VTX, camera, GPS, LED, and buzzer.

Image: Comprehensive wiring diagram for the HGLRC SPECTER 25A AIO.

Connection Details:

  • Battery: Connect your 3-6S Lipo battery to the main positive (+) and negative (-) pads. Use the appropriate XT60 or XT30 power cord.
  • Motors: Solder the signal wires from your ESCs to the M1, M2, M3, and M4 pads. Ensure correct motor order and direction.
  • Receiver: Connect your SBUS/PPM/DSM/IBUS/CRSF receiver to the dedicated RX pad (UART2 RX).
  • Video Transmitter (VTX):
    • Analog VTX: Connect to VTX, GND, and Video pads.
    • HD VTX (e.g., DJI O3 Air Unit): Use the provided SH1.0-6P DJI cable to connect to the dedicated port (GND, 9V, TX1, RX1, SCL, SDA).
  • Camera: Connect your FPV camera to the CAM, GND, and Video pads.
  • GPS: Connect GPS module to TX3, RX3, GND, and 5V pads.
  • LED: Connect LED strips to the LED pad.
  • Buzzer: Connect the buzzer to the BZ+ and BZ- pads.

Operating

Firmware and Configuration

The HGLRC SPECTER 25A AIO comes pre-flashed with HGLRCF722AIOV2 flight control firmware and Q-H-30-Bluejay ESC firmware. For initial setup and advanced configuration, connect the flight controller to your computer via the Type-C USB port.

  • Betaflight Configurator: Use the Betaflight Configurator software on your computer to access and adjust flight controller settings, calibrate sensors, and configure modes.
  • ESC Configuration: The Bluejay firmware for the ESCs can be configured using appropriate tools if needed, though default settings are typically suitable for most users.

Wireless Bluetooth Tuning

One of the key features of the SPECTER 25A AIO is its integrated wireless Bluetooth module. This allows for convenient parameter adjustment on the go:

  • SpeedyBee APP: Download the SpeedyBee APP on your smartphone or tablet.
  • Connect via Bluetooth: Power on your drone, open the SpeedyBee APP, and connect to the flight controller via Bluetooth.
  • Adjust Parameters: You can now adjust serial port settings, PID values, rates, and other flight control parameters wirelessly.

Maintenance

To ensure the longevity and optimal performance of your HGLRC SPECTER 25A AIO, follow these maintenance guidelines:

  • Regular Inspection: Periodically inspect all solder joints and connections for any signs of damage, corrosion, or loose wires.
  • Cleanliness: Keep the flight controller free from dust, dirt, and moisture. Use compressed air or a soft brush for cleaning. Avoid using liquids directly on the board.
  • Physical Protection: Ensure the flight controller is adequately protected within your drone's frame to prevent physical impact damage.
  • Firmware Updates: Regularly check for official firmware updates from HGLRC or Betaflight to benefit from performance improvements and bug fixes.

Troubleshooting

If you encounter issues with your HGLRC SPECTER 25A AIO, consider the following troubleshooting steps:

  • No Power: Check battery connections, power cord integrity, and ensure the battery is charged. Verify no short circuits on the board.
  • No Communication (USB/Bluetooth): Ensure correct drivers are installed for USB. For Bluetooth, confirm the SpeedyBee APP is updated and the flight controller is powered on. Try restarting both the flight controller and the device running the app.
  • Motor Issues: Verify motor connections to the ESC pads. Check motor direction in Betaflight Configurator. Ensure ESC calibration is correct if applicable.
  • Unstable Flight: Review PID settings. Ensure the gyroscope is calibrated correctly. Check for vibrations affecting the flight controller.
  • Video Issues: For analog VTX, check camera and VTX connections. For HD VTX, ensure the DJI cable is securely connected and configured correctly in Betaflight.
  • Black Box Data: If experiencing intermittent issues, analyze the black box logs for clues regarding flight controller behavior and sensor readings.

If problems persist, consult online FPV communities or contact HGLRC support for further assistance.

User Tips

  • Start with Defaults: For initial flights, it's often best to use the default Betaflight settings or recommended PIDs for your frame size. Adjust incrementally.
  • Secure Wiring: Use zip ties or heat shrink to secure all wires, preventing them from interfering with propellers or vibrating loose during flight.
  • Backup Settings: Always save a backup of your Betaflight configuration (CLI dump) after a successful setup or significant changes.
  • Test Before Flight: Before every flight, perform a quick check of motor spin direction, control surface response, and FPV feed.

Warranty and Support

For warranty claims, technical support, or service inquiries, please contact the seller or the official HGLRC customer support channels. Keep your proof of purchase handy. Refer to the official HGLRC website for the most up-to-date support information and contact details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.