Salange minitripod16

Contents

Salange Desktop Projector Stand User Manual

Model: minitripod16 | Brand: Salange

1. Introduction

Thank you for choosing the Salange Desktop Projector Stand. This adjustable table holder is designed to elevate your viewing experience by providing a stable and flexible platform for your projector. Made from high-quality aluminum alloy, it ensures durability and stability for various mini projectors.

Salange Desktop Projector Stand elevating a projector
The Salange Desktop Projector Stand, designed to elevate your viewing experience with its durable and stable aluminum alloy construction.

2. Specifications

FeatureDetail
BrandSalange
Model Numberminitripod16 (also referred to as Minitripod 15)
Product MaterialAluminum Alloy, ABS
Product Weight0.265 kg (265g)
Load-bearing CapacityUp to 5 kg (11 lbs)
Compatibility1/4 inch (6mm) standard screw, compatible with most mini projectors (e.g., XGIMI, Xiaomi Halo+, P92Max, HY300)
Adjustable AngleUp to 90° tilt, 0°-180° rotation
Dimensions (Approx.)Base Width: 16cm (6.3in), Total Height: 12cm (4.72in), Base Height: 7cm (2.76in), Top Platform Width: 10cm (3.94in), Top Platform Height: 2.5cm (0.98in)
Dimensions and specifications of the Salange Projector Stand
Detailed dimensions and key specifications of the projector stand.

3. Setup Instructions

  1. Unpack the Stand: Carefully remove the projector stand from its packaging. Ensure all components are present.
  2. Place on a Stable Surface: Position the stand on a flat, stable surface where you intend to use your projector. The thickened and widened aluminum alloy chassis provides strong support.
  3. Attach Your Projector: The stand features a 1/4 inch (6mm) international standard screw on its top platform. Align the screw with the corresponding screw hole on the bottom of your projector. Gently twist your projector clockwise onto the screw until it is securely fastened. Do not overtighten.
Close-up of the 1/4 inch standard screw mount on the projector stand
The 1/4 inch (6mm) standard screw ensures broad compatibility with various projector models.
Projector stand compatibility with various mini projectors
The stand is compatible with 99.99% of mini projectors on the market that have a 1/4 inch screw hole.

4. Operating Instructions

The Salange Projector Stand features an upgraded gimbal design, allowing for flexible and precise angle adjustments to achieve the optimal projection angle.

  • Adjusting Tilt Angle: The stand's gimbal allows for a tilt adjustment of up to 90 degrees. Gently hold your projector and adjust the angle of the top platform to direct the projection as needed. The design ensures persistent hover balance even after 10,000 cycles.
  • Adjusting Rotation: The stand supports a 0° to 180° rotation. You can freely rotate your projector left or right to fine-tune its position without moving the base of the stand.
  • Ensuring Stability: After adjusting the angle, ensure the projector is stable on the stand. The balanced force distribution and stable center of gravity prevent tipping.
Diagram showing 90 degree adjustable angle for the projector stand
The stand offers up to 90° adjustable angle for flexible projection.
Projector on stand demonstrating 0 to 180 degree rotation
The stand allows for a full 0°-180° rotation of the mounted projector.

5. Maintenance

  • Cleaning: Wipe the stand with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp cloth can be used, followed by drying. Avoid abrasive cleaners or solvents.
  • Storage: When not in use, store the stand in a cool, dry place. Its foldable design allows for easy storage and portability.
  • Inspection: Periodically check the screws and joints to ensure they are secure. Tighten if necessary, but do not overtighten.

6. Troubleshooting

Problem: Projector feels unstable on the stand.
Solution: Ensure the stand is placed on a completely flat and stable surface. Verify that your projector is securely screwed onto the 1/4 inch bolt. Check that the projector's weight does not exceed the 5 kg (11 lbs) load capacity.
Problem: Cannot achieve desired projection angle.
Solution: The gimbal design allows for significant adjustment. Gently manipulate the projector to tilt up to 90° or rotate 0°-180°. If the movement feels stiff, ensure no debris is obstructing the joints.
Problem: Projector does not fit the screw mount.
Solution: The stand uses a standard 1/4 inch (6mm) screw. Confirm that your projector has a compatible 1/4 inch screw hole. If not, an adapter may be required (not included).

7. User Tips

  • Always check your projector's weight and screw mount type before use to ensure compatibility and stability.
  • For optimal viewing, experiment with different angles and rotations to find the perfect projection position for your environment.
  • The compact and lightweight design makes this stand ideal for both indoor and outdoor use. Remember to secure your projector properly when moving the setup.

8. Warranty and Support

For any questions, technical support, or warranty claims, please contact the Salange Official Store directly through your purchase platform. Please retain your proof of purchase for warranty services.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.