Zifon PT2000

Contents

Zifon PT2000 Wireless Remote Control Head User Manual

Model: PT2000

1. Introduction

The Zifon PT2000 is a versatile wireless remote control head designed for precise camera movement and time-lapse photography. It features dual-axis pan and tilt rotation, joystick controls for smooth operation, and broad compatibility with various photographic equipment. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your PT2000.

Zifon PT2000 Wireless Gimbal with camera mounted
Zifon PT2000 Wireless Gimbal with a camera mounted, illustrating its primary function as a delayed photography wireless remote control head.

Key Features:

  • Pan + Tilt Dual Axis Rotation: Offers horizontal infinite rotation and 50° tilt angle adjustment.
  • Adjustable Speed: 8 levels of rotational speed for precise control.
  • Joystick Controls: Enables silky smooth manipulation of speed and direction for both axes.
  • AB Point Switching: One-touch switching between two preset shooting angles.
  • Time-Lapse Photography: Easy mobile time-lapse photography with timed shutter release cable.
  • High Load Capacity: Supports up to 2.2KG, compatible with most DSLR, mirrorless cameras, and other devices.
  • Universal Mounting: Equipped with a 1/4 screw interface quick release plate and a 1/4 universal threaded connector for tripods.
  • Leveling Device: Integrated for quick and accurate equipment leveling.
Icons representing key features of the PT2000
Visual summary of PT2000 features: 360 panorama mode, wireless remote, 2.2KG load capacity, toggle photo, bi-level meter, spot scan.

2. Safety Information

  • Read all instructions before use.
  • Do not expose the device to water or excessive moisture.
  • Avoid dropping or subjecting the device to strong impacts.
  • Use only the specified charging method (Type-C, 5V/2A).
  • Keep out of reach of children.
  • Do not attempt to disassemble or repair the unit yourself. Contact qualified personnel for service.
  • Ensure the camera or device mounted does not exceed the maximum load capacity of 2.2KG.

3. Product Overview

Components:

  • PT2000 Remote Control Head
  • Wireless Remote Control
  • Quick Release Plate
  • Cell Phone Clip (optional/sold separately, but compatible)
  • Charging Cable (Type-C)
Product dimensions of the Zifon PT2000
Product dimensions: 4.33in/11.0cm (width/depth) x 4.72in/12cm (height).

Controls and Interfaces:

  • Main Unit: Display screen, control buttons, 1/4 screw interface, leveling device, 1/4 universal threaded connector at base, Type-C charging port.
  • Wireless Remote: Joystick, power button, mode buttons, direction controls, AB point switch.
User operating the PT2000 with a remote control
The wireless remote control features a joystick for smooth and precise manipulation of the pan and tilt axes.

4. Setup

4.1 Charging the Device

  1. Connect the provided Type-C charging cable to the PT2000's charging port.
  2. Connect the other end of the cable to a 5V/2A power adapter (not included).
  3. The device will indicate charging status on its display. A full charge typically takes a few hours.

4.2 Mounting on a Tripod

  1. Locate the 1/4 universal threaded connector at the base of the PT2000.
  2. Screw the PT2000 onto your tripod's mounting screw until secure.
Base of PT2000 with 1/4 threaded connector
The base of the PT2000 features a 1/4 universal threaded connector for easy tripod mounting.

4.3 Attaching Your Camera/Device

  1. Ensure the quick release plate is securely attached to your camera or device using its 1/4 screw interface.
  2. Slide the quick release plate with your camera into the mounting slot on the PT2000 head until it clicks into place.
  3. Tighten any locking mechanisms to ensure the camera is stable.
  4. If using a cell phone, attach it to a compatible cell phone clip (not included) and then mount the clip to the PT2000.
Close-up of the 1/4 screw interface and quick release plate
The 1/4 screw interface and non-slip quick release plate adapt to most photographic equipment.
PT2000 with a smartphone mounted using a cell phone clip
The PT2000 can be used with a cell phone clip for smartphone photography and videography.

4.4 Leveling the Device

The PT2000 is equipped with a leveling device to ensure your setup is perfectly horizontal. Adjust your tripod or the PT2000's base until the bubble in the leveling device is centered.

Close-up of the leveling device on the PT2000
Equipped with a leveling device for quick and accurate equipment level positioning.

5. Operating Instructions

5.1 Power On/Off

  • To power on, press and hold the power button on the main unit or the remote control.
  • To power off, press and hold the power button again.

5.2 Basic Pan and Tilt Control

  1. Use the joystick on the wireless remote control to manipulate the pan (horizontal) and tilt (vertical) movements.
  2. Gently push the joystick in the desired direction for smooth movement.
  3. The speed of rotation can be adjusted through 8 different levels. Refer to the device's display or remote for speed settings.
Diagram showing Pan + Tilt Dual Axis Rotation
The PT2000 offers horizontal infinite rotation and 50° tilt angle adjustment with 8 levels of adjustable rotational speed.

5.3 AB Point Switching

The PT2000 allows you to set two specific shooting angles (A and B) and switch between them with a single button press.

  1. Manually position the camera to your first desired angle (Point A).
  2. Press the 'Set A' button on the remote or main unit to save this position.
  3. Move the camera to your second desired angle (Point B).
  4. Press the 'Set B' button to save this position.
  5. To switch between Point A and Point B, press the 'AB Switch' button.
Diagram illustrating one-touch switching of AB points
Set two shooting angles (A and B) and switch between them with a single button press.

5.4 Time-Lapse Photography

The PT2000 supports time-lapse photography with a timed shutter release cable (not included, compatible with various camera brands). Consult your camera's manual for connecting a shutter release cable.

  1. Connect the shutter release cable from your camera to the PT2000.
  2. Enter time-lapse mode on the PT2000 (refer to the display/remote for menu navigation).
  3. Set the desired parameters such as interval, exposure time, and total duration.
  4. Start the time-lapse sequence. The PT2000 will execute programmed movements and trigger the camera's shutter.

5.5 Device Compatibility

The Zifon PT2000 is designed for comprehensive compatibility with a wide range of devices, utilizing 1/4 standard universal screws.

Diagram showing various compatible devices for the PT2000
The PT2000 is compatible with card machines, microsingle cameras, DV cameras, sports cameras, SLR cameras, cell phones, projectors, fill-in lights, and video cameras.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or abrasive materials.
  • Storage: Store the PT2000 in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: For prolonged storage, charge the internal battery to approximately 50-60% every three months to maintain battery health.
  • Avoid Overloading: Always ensure the mounted equipment does not exceed the 2.2KG load capacity to prevent damage to the motors.

7. Troubleshooting

  • Device not powering on: Ensure the battery is charged. Connect to a power source and try again.
  • Remote control not responding: Check the remote's battery. Ensure the remote and main unit are paired (refer to pairing instructions if available, otherwise assume automatic pairing). Ensure you are within the >40m remote distance.
  • Movement is jerky or inconsistent: Ensure the mounted equipment is balanced and does not exceed the 2.2KG load capacity. Check for any obstructions.
  • Camera not triggering in time-lapse mode: Verify the shutter release cable is correctly connected to both the PT2000 and your camera. Check camera settings.
  • Device not leveling correctly: Ensure the tripod is stable and on a flat surface. Adjust the tripod legs or the PT2000's base until the leveling bubble is centered.

8. Specifications

Product Parameters table for Zifon PT2000
Detailed product parameters for the Zifon PT2000.
ParameterValue
Product ModelPT2000
Load Capacity2.2KG
Pan Speed8 grades, 0.06r/min - 3.5r/min
Tilt Speed8 grades, 0.1r/min - 0.6r/min
Remote Type2.4G
Remote Channel00-99, joystick control
Vertical Angle50 degrees
Horizontal Angle360 degrees
Remote Distance>40m
Recharge InterfaceType-C
Power3W max
Internal Battery2000mAh
Size (L*W*H)125mm * 120mm * 125mm
MaterialAluminum

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the manufacturer or your point of purchase. Keep your proof of purchase for warranty claims.

© 2024 Zifon. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.