Varstrom VD03 Display

Contents

VD03 E-Bike Display User Manual

Brand: Varstrom | Model: VD03

1. Introduction

The Varstrom VD03 is a compact and high-resolution 1.5-inch LED display designed for Bafang mid-motor e-bikes utilizing the CAN protocol. This display provides essential riding information and supports advanced features through the 'BIKEGO+' mobile application. This manual will guide you through the installation, operation, and maintenance of your VD03 display.

VD03 Display with CAN protocol connector and app download instructions
Figure 1: VD03 Display highlighting CAN protocol and app support.

The VD03 display features a CAN protocol 5-pin male round connector for seamless integration with compatible Bafang mid-motors. Download the 'BIKEGO+' app from the App Store or Google Play for extended functionalities.

2. Package Contents

Please check the package carefully to ensure all items are present:

  • VD03 E-Bike Display
  • Mounting Bracket (for 22.2mm handlebars)
  • User Manual (this document)

3. Setup and Installation

3.1 Compatibility Check

The VD03 display is specifically designed for Bafang mid-motors that use the CAN protocol. It is compatible with the latest Bafang CAN protocol version 2025 for BBS01B, BBS02B, BBS03, M200, M400, M420, M500, M510, M600, M620, M625, M3.25, and M25225 mid-engine systems. It is NOT compatible with BAFANG motors that use the UART protocol. If you are unsure about compatibility, please consult your motor's documentation or contact support before installation.

3.2 Physical Installation

  1. Identify a suitable position on your e-bike's handlebar. The display is designed for standard handlebars with a diameter of 22.2 mm.
  2. Attach the mounting bracket to the handlebar and secure it firmly.
  3. Slide the VD03 display onto the bracket until it clicks into place.
  4. Adjust the display angle for optimal visibility.

3.3 Wiring Connection

Connect the VD03 display to your Bafang mid-motor system using the provided 5-pin CAN protocol connector. Ensure all connections are secure and properly aligned to prevent damage.

Detailed wiring diagram for Bafang mid-motor system components including battery, motor, sensors, and display
Figure 2: Bafang Mid-Motor System Wiring Diagram. The Ebike LCD Display connects via the CAN protocol connector.

This diagram illustrates the typical connections for a Bafang mid-motor system. Ensure your VD03 display (Ebike LCD Display) is connected to the CAN protocol connector. Note that brake levers are typically default; if a speed sensor is not needed, please contact support.

3.4 App Installation

For advanced features and settings, download the 'BIKEGO+' app on your smartphone:

  • Search for "BIKEGO+" in the Apple App Store (iOS) or Google Play Store (Android).
  • Download and install the application.
  • Follow the in-app instructions to connect your VD03 display via Bluetooth.

4. Operating Instructions

The VD03 display provides a clear and easy-to-read interface for your e-bike's essential information.

VD03 Ebike LCD Display showing battery level, real-time speed, gear display, and headlight display
Figure 3: Main interface of the VD03 E-Bike Display.

The display shows key information such as battery level, real-time speed, and gear. It also supports app lock/unlock functionality for your e-bike.

4.1 Main Interface Display Elements

  • Maintenance Reminder: Displays a flag when maintenance is due.
  • Headlight Display: Indicates the headlight's on/off status. A logo appears when the system headlight is active.
  • Power Prompt: Shows the real-time battery power level.
  • Real-time Speed Display: Displays your current speed value.
  • Bluetooth Icon: Indicates Bluetooth on/off status. A logo appears upon successful connection to the display's Bluetooth.
  • Boost Icon: Displays the boost function status.

4.2 Pedal Assist System (PAS) Levels

The display supports 3, 5, or 9 pedal assist levels, configurable via the 'BIKEGO+' app. Adjust the assist level using the '+' and '-' buttons on the display.

4.3 App Functions ('BIKEGO+')

Once connected to the 'BIKEGO+' app, you can access advanced features:

  • Reset total mileage.
  • Configure auto shutdown settings.
  • Customize wheel size for accurate speed and distance readings.
  • App lock/unlock functionality for your e-bike.

4.4 Password

The default password for advanced settings is 2020. It is recommended to change this password for security.

5. Maintenance

To ensure the longevity and optimal performance of your VD03 display, follow these maintenance guidelines:

  • Cleaning: Wipe the display screen and body with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the plastic.
  • Water Resistance: The display has an IP67 waterproof rating, providing reliable protection against dust and temporary immersion in water. However, it is not suitable for extreme weather conditions or prolonged submersion.
  • Storage: When not in use for extended periods, store the e-bike and display in a dry, temperate environment.
  • Cable Inspection: Periodically check all cables and connectors for signs of wear, damage, or loose connections.

6. Troubleshooting

If you encounter issues with your VD03 display, consider the following:

  • Display Not Turning On:
    • Check if the e-bike battery is charged and properly connected.
    • Ensure all display cables are securely connected to the motor system.
  • Incorrect Speed Reading:
    • Verify that the wheel size setting in the 'BIKEGO+' app is correct for your e-bike.
    • Check the speed sensor for proper installation and function.
  • App Connection Issues:
    • Ensure Bluetooth is enabled on your smartphone and the display.
    • Restart both the display and your smartphone.
    • Make sure the 'BIKEGO+' app is updated to the latest version.
  • Compatibility Warning: Remember, the display is not compatible with BAFANG motors that use the UART protocol. If you are unsure about your motor's protocol, please contact our technical support.

7. Specifications

Feature Specification
Type Display
Brand Name Varstrom
Origin Mainland China
Screen size 17 x 34 mm / 1.5 inch LED
Bracket Diameter 22.2mm
PAS levels 3/5/9 support levels
Communication protocol CAN-BUS, triangular 5 pin connector
Waterproof IP67
Password 2020 (default)
APP BIKEGO+

8. Warranty and Support

The Varstrom VD03 display comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

Our technical team, based in Poland, provides professional advice and reliable solutions for any issues you may encounter. We are committed to providing lasting performance and safety for your product.

For technical support or warranty claims, please contact our customer service team with your purchase details.

9. User Tips

  • Regular Checks: Periodically check all connections and mounting screws to ensure they are tight and secure, especially after riding on rough terrain.
  • Battery Management: Keep an eye on the battery level displayed to avoid unexpected power loss during your ride.
  • App Integration: Utilize the 'BIKEGO+' app to customize settings like PAS levels and wheel size for a personalized riding experience.
  • Environmental Awareness: While the display is IP67 waterproof, avoid exposing it to extreme conditions or high-pressure water jets during cleaning to prevent potential damage.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.