Introduction
The BAFANG DPC080 E-Bike Display is an advanced LCD screen instrument designed for BAFANG mid-mounted motors using the CAN protocol. It offers an all-in-one solution with an optimized ergonomic design, providing a clean handlebar setup and intuitive operation with three buttons. This display is compatible with 36V, 48V, and 52V e-bike systems and features a 1.9-inch TFT screen.
Specifications
| Feature | Specification |
|---|---|
| Type | Display (HMI) |
| Model | DP C080.C |
| Screen | 1.9 inch TFT |
| Holder Size | φ22.2mm |
| Operating Voltage | 36V/48V/52V DC |
| Rated Power Consumption | 0.29W |
| Power OFF Leakage Current | < 1uA |
| Operating Temperature | -20℃~45℃ |
| Storage Temperature | -20℃~60℃ |
| Protection Rating | IPX7 |
| Storage Humidity | 30%-70% |
| PAS Assistance Levels | 5 (0-5 Pas) |
| USB Port | Type-C (5V 500mA) |
| Bluetooth Function | Yes |
| Advanced Setting Password | 1919 |
| Supported Languages | English, German, Dutch, French, Italian, Czech |
| Scope of Application | EN 15194 EPAC |
| Appearance Material | PC/ABS shell, aluminosilicate glass LCD screen |
Setup
1. Installation
- Ensure your e-bike handlebar has a diameter of φ22.2mm for proper mounting of the DPC080 display.
- Securely attach the display to the handlebar using the provided mounting hardware.
2. Wiring Diagram
The DPC080 display connects to your BAFANG mid-mounted motor system via a CAN protocol 5-pin male round connector. Refer to the wiring diagram below for proper connection of all components, including the battery, speed sensor, brake levers, throttle, headlight, and optional rear lamp.
3. App Integration
For enhanced functionality and customization, download the "BAFANG GO+" app. Search for "BAFANG GO+" in your device's app store (available on App Store and Google Play).
Operating Instructions
The DPC080 display features a user-friendly interface with three buttons for easy navigation and control.
Key Functions:
- Speed Indication: View real-time speed, maximum speed ("MAX"), and average speed ("AVG").
- Unit Selection: Switch between kilometers (Km) and miles (mile) according to your preference.
- Smart Power Indication: The display provides stable battery percentage alerts through optimized algorithms, ensuring accurate battery status.
- Automatic Headlight Control: The HMI backlight and connected headlight will automatically turn ON/OFF based on changes in environmental light conditions.
- Backlight Brightness Adjustment: Adjust the backlight brightness across 4 levels (25% to 100%) to suit your riding environment.
- Gear Control: Access and control 6 different assistance modes.
- Mileage Indication:
- TRIP: Displays single trip mileage.
- ODO: Displays accumulated total mileage (up to 99999).
- RANGE: Shows remaining mileage based on current battery level and assistance.
- Cal: Indicates energy consumed (calories).
- Error Code Indication: The display will show error codes if any issues are detected in the system.
- Walk Assistance: Activate walk assistance mode for easy maneuvering of the e-bike when not riding.
- Maintenance Prompt: Receive prompts for scheduled maintenance.
- Language Selection: Choose from 6 available languages: English, German, Dutch, French, Italian, Czech.
Maintenance
- Cleaning: Regularly wipe the display screen and housing with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the screen or casing.
- Connection Check: Periodically inspect all cable connections to the display and motor for secure fit and any signs of wear or damage.
- Software Updates: Check for firmware updates via the BAFANG GO+ app to ensure optimal performance and access to new features.
- Maintenance Prompts: Pay attention to any maintenance prompts displayed on the screen and address them as recommended.
Troubleshooting
If you encounter issues with your DPC080 display, refer to the following common troubleshooting steps:
- Display Not Turning On:
- Check if the e-bike battery is charged and properly connected.
- Ensure all cables to the display are securely plugged in.
- Incorrect Speed/Mileage Readings:
- Verify that the speed sensor is correctly installed and aligned with the magnet on the wheel.
- Check for any obstructions or damage to the speed sensor cable.
- Error Codes Displayed:
- The DPC080 display provides error code indications. Consult the BAFANG documentation or the BAFANG GO+ app for a list of error codes and their corresponding solutions.
- If an error persists, contact BAFANG customer support or an authorized service center.
- Bluetooth Connectivity Issues:
- Ensure Bluetooth is enabled on your smartphone and the BAFANG GO+ app is open.
- Try restarting both the display and your smartphone.
User Tips
- Advanced Settings: The DPC080 display includes advanced settings for customization. The password for accessing these settings is 1919. Exercise caution when modifying advanced parameters.
- App Usage: Utilize the BAFANG GO+ app for detailed ride data, customization options, and potential firmware updates to enhance your riding experience.
Warranty and Support
The BAFANG DPC080 Display comes with a 1-year warranty from the date of purchase. BAFANG is committed to providing high-quality products and excellent customer service.
Service and Repair:
- BAFANG has established service and repair points in various regions, including Poland, France, Germany, Spain, and Italy.
- For technical support or warranty claims, please contact BAFANG customer service or an authorized service center. Professional technicians are available to assist with troubleshooting and repairs.
