EOENKK TFX-200 Power Supply 24 Pins 200W

Contents

EOENKK TFX-200 Power Supply User Manual

Model: TFX-200 Power Supply 24 Pins 200W

1. Introduction

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your EOENKK TFX-200 Power Supply. Please read this manual thoroughly before installation and retain it for future reference.

2. Safety Precautions

  • Always disconnect the power supply from the AC outlet before installing or removing any components.
  • Do not open the power supply casing. High voltages are present inside, and there are no user-serviceable parts. Opening the casing will void the warranty.
  • Ensure proper grounding to prevent electrical shock.
  • Install the power supply in a well-ventilated area, away from heat sources and moisture.
  • Use only the cables provided with the power supply or compatible replacements.

3. Setup and Installation

Follow these steps to install your TFX-200 Power Supply:

  1. Prepare Your System: Ensure your computer system is completely powered off and unplugged from the wall outlet. Open your computer case.
  2. Remove Old Power Supply (if applicable): Disconnect all cables from your old power supply to the motherboard, graphics card, drives, and other components. Unscrew and remove the old power supply from the case.
  3. Install New Power Supply: Carefully slide the TFX-200 Power Supply into the designated bay in your computer case. Secure it with screws.
  4. Connect Main Power: Connect the 24-pin ATX connector from the power supply to the corresponding port on your motherboard. Ensure it clicks securely into place.
  5. Connect CPU Power: Connect the 4-pin or 8-pin CPU power connector to the motherboard.
  6. Connect Peripheral Power: Connect SATA power connectors to your hard drives, SSDs, and optical drives. Connect Molex connectors to any other peripherals that require them.
  7. Connect Graphics Card Power (if applicable): If your graphics card requires additional power, connect the appropriate PCIe power connectors (e.g., 6-pin or 8-pin).
  8. Cable Management: Route cables neatly to improve airflow and aesthetics within your case.
  9. Close Case and Connect AC Power: Close your computer case. Connect the AC power cord to the power supply's input socket and then to a wall outlet or surge protector.
Rear view of TFX-200 Power Supply
Rear view of the TFX-200 Power Supply, showing the cooling fan, AC power input, and power switch. Ensure the power switch is in the OFF position before connecting to AC power.

For non-visual users: The image displays the rear panel of the TFX-200 power supply. On the left, a large circular fan grille is visible. To the right of the fan, there is a standard IEC C14 AC power inlet for the power cord, and below it, a red rocker switch for turning the power supply ON/OFF. The rest of the panel is perforated for ventilation.

4. Operating Instructions

After successful installation, follow these steps to operate your power supply:

  1. Power On: Ensure all connections are secure. Flip the power switch on the rear of the power supply (refer to the image in Section 3) to the 'ON' position.
  2. System Boot: Press the power button on your computer case to start your system.
  3. Power Off: Always shut down your operating system gracefully before turning off the power supply switch or unplugging the AC cord.

5. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your power supply:

  • Cleaning: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan and vents. Ensure the power supply is off and unplugged before cleaning.
  • Environment: Operate the power supply in a clean, dry, and well-ventilated environment. Avoid extreme temperatures and humidity.
  • Cable Inspection: Occasionally check all power cables for any signs of wear, fraying, or damage. Replace damaged cables immediately.

6. Troubleshooting

If you encounter issues with your power supply, try these basic troubleshooting steps:

  • No Power:
    • Check if the AC power cord is securely plugged into both the power supply and the wall outlet.
    • Ensure the power switch on the rear of the power supply is in the 'ON' position.
    • Verify that the wall outlet is functional by plugging in another device.
    • Check all internal power connections (24-pin ATX, CPU, SATA, PCIe) to ensure they are firmly seated.
  • Intermittent Power/System Instability:
    • Ensure your system's power requirements do not exceed the 200W capacity of this power supply.
    • Check for proper ventilation and ensure the power supply fan is spinning freely. Overheating can cause instability.
    • Inspect for any loose connections.
  • Unusual Noises:
    • A rattling noise might indicate a loose screw or a foreign object inside the case. Disconnect power and carefully inspect.
    • A grinding noise from the fan could mean the fan is failing. If the fan is not spinning or making excessive noise, contact support.

If these steps do not resolve the issue, contact customer support for further assistance.

7. Specifications

FeatureSpecification
ModelTFX-200 Power Supply
BrandEOENKK
Rated Power200W (Range 150W - 250W)
Main Connector24 Pins
ModularNon-Modular
80 PLUS CertificationOther Certification
ApplicationDesktop, Server, Mining
Package Length23 cm
Package Width11 cm
Package Height32 cm
Package Weight1.0 kg
OriginMainland China

8. User Tips

While no specific user tips were provided, here are some general recommendations for power supply usage:

  • Verify Compatibility: Always double-check that the power supply's form factor (TFX) and wattage (200W) are compatible with your computer case and components before installation.
  • Secure Connections: Ensure all power connectors are fully seated and locked into place to prevent intermittent power issues or damage.
  • Adequate Ventilation: Do not obstruct the power supply's fan or ventilation openings. Good airflow is crucial for cooling and stable operation.

9. Warranty and Support

For warranty information, terms, and conditions, please refer to the documentation provided at the time of purchase or contact your seller directly. If you require technical assistance or have questions not covered in this manual, please reach out to the seller or manufacturer's support channels.

© 2024 EOENKK. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.