Introduction
The LNDU D280L Smart Door Lock is an advanced keyless entry system designed to provide secure and flexible access to your home. It integrates multiple unlocking methods including fingerprint, keypad password, mobile application control, and traditional mechanical keys. This manual provides comprehensive instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and security.

Setup and Installation
Before beginning installation, ensure your door meets the following specifications:
- Door Thickness: 1-3/8" to 2-1/8" (35mm to 55mm)
- Door Hole Diameter: 2-1/8" (54mm)
- Latch Hole Depth: At least 1" (25mm)
- Backset: 2-3/8" (60mm) or 2-3/4" (70mm)

Installation Steps
- Prepare the Door: Verify door dimensions as per the diagram. Ensure the latch hole in the door frame is at least 1" (25mm) deep for the deadbolt to extend fully.
- Install the Latch:
- If the backset is 60mm, install the latch directly.
- If the backset is 70mm, rotate the latch 90°, pull to extend, then rotate 90° backwards to secure.
- Install Exterior Assembly: Ensure the door hole diameter is 54mm. Carefully feed the cable through the door hole, making sure it is positioned below the latch.
- Install Interior Assembly:
- Keep the thumb turn in a vertical position.
- Install the mounting plate and fix it with screws.
- Firmly connect the cable to the connector on the interior assembly.
- Install the interior assembly and fix it with screws.
- Load 4 AA batteries and put on the battery cover.
- Test the Lock: After installation, test the lock's functionality. The default master code is 123456. After adding your fingerprint and password, test whether the password, fingerprint, and backup key are valid.
Operating Instructions
Unlocking Methods
- Fingerprint: Place your registered fingerprint on the sensor for quick access. The lock supports up to 50 unique fingerprints.
- Keypad Password: Enter your personal code on the keypad. The lock supports up to 100 passwords (3 admin codes, 97 user codes).
- Mobile App: Use the dedicated mobile application (Bluetooth connectivity required) to unlock the door remotely or view access logs.
- Mechanical Key: For emergency or traditional access, use the provided backup keys.

Advanced Security Features
- Anti-Peeping Password: To prevent others from guessing your code, you can enter random digits before or after your actual PIN code. The lock will still recognize the correct sequence within the longer string.
- Temporary Passwords: Generate temporary passwords via the mobile app for visitors, housekeepers, or service personnel. These can be time-limited for enhanced security.


Locking Mechanisms
- Auto Lock: The lock can be configured to automatically lock after a set period once the door is closed.
- One Touch Locking: Simply press a designated button on the keypad to instantly lock the door.

Maintenance
Battery Replacement
The LNDU D280L Smart Door Lock is powered by 4 AA dry cell batteries. When the battery level is low, the lock will provide an alert. To replace the batteries:
- Remove the battery cover on the interior assembly.
- Remove the old batteries.
- Insert 4 new AA batteries, ensuring correct polarity.
- Replace the battery cover.
Cleaning
Wipe the lock's exterior with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and electronic components.
Weather Resistance
The lock is designed with an IP54 rating, making it resistant to dust and splashes of water. It can operate in temperatures ranging from -4°F to +140°F (-20°C to +60°C), making it suitable for various climates.

Troubleshooting
- Lock not responding: Check battery levels and replace if necessary. Ensure the cable connection between the exterior and interior assemblies is secure.
- Fingerprint not recognized: Ensure your finger is clean and dry. Try re-registering your fingerprint if issues persist.
- Keypad not responding: Ensure the keypad is clean. If the lock is completely unresponsive, try using the mechanical key and then check the batteries.
- App connectivity issues: Ensure Bluetooth is enabled on your smartphone and you are within range of the lock. Restart the app and/or your phone if necessary.
- Door not locking/unlocking properly: Verify that the latch is installed correctly and moves freely. Check for any obstructions in the door frame or strike plate.
Specifications
| Feature | Specification |
|---|---|
| Model Number | D280L |
| Brand Name | LNDU |
| Power Supply | 4 x AA Dry Batteries |
| Fit Door Thickness | 35mm-55mm (1-3/8" to 2-1/8") |
| Door Hole Diameter | 54mm (2-1/8") |
| Latch Hole Depth | 25mm (1") |
| Backset | 60mm (2-3/8") or 70mm (2-3/4") |
| Connectivity | Bluetooth |
| Ways To Unlock | Fingerprint, Password, Mechanical Keys, App |
| Material | Zinc Alloy |
| Fingerprint Capacity | Up to 50 |
| Password Capacity | Up to 100 (3 Admin, 97 User) |
| Fingerprint Accuracy Rate | 99.9% |
| Fingerprint Identification Speed | 0.3 seconds |
| Weather Resistance | IP54 (Dust and Splash Resistant) |
| Operating Temperature | -4°F to +140°F (-20°C to +60°C) |
User Tips
- For optimal fingerprint recognition, ensure your finger is clean and covers the sensor completely.
- Regularly check battery levels through the app or by observing the lock's indicators to avoid unexpected lockouts.
- When setting up temporary passwords, always specify an expiration time for enhanced security.
- Familiarize yourself with the mechanical key override in case of electronic failure or battery depletion.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.