1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your new LENZOD Dashboard Display PCB Circuit Board. Designed as a high-quality, waterproof replacement accessory for Xiaomi M365 and M365 Pro electric scooters, this dashboard ensures clear data display and acute signal response for optimal scooter performance.
The circuit board is constructed from premium electronic units, offering high corrosion resistance and reliable signal transmission with minimal delay. It allows you to monitor the real-time status of your scooter through clear figures and indications on the screen.
Video: Overview of the LENZOD Dashboard Display PCB, showcasing its components and connectors.
2. Specifications
| Feature | Description |
|---|---|
| Brand Name | LCQPTW |
| Model Number | For OEM M365/ Pro |
| Type | Scooter Engines (Dashboard Display) |
| Voltage | 36V |
| Material | Electronic component, Premium Metal (for anti-oxidation) |
| Color | Red PCB |
| Origin | Mainland China |
| Board Dimensions (approx.) | 7.2 cm (Length) x 2.3 cm (Width) |
| Main Cable Length (approx.) | 24.9 cm |
| Power Cable Length (approx.) | 12 cm |
| Waterproof | Yes |
Image: Dimensions of the LENZOD Dashboard Display PCB.
3. Package Contents
The package includes:
- 1 x Scooter Dashboard Display PCB Circuit Board
4. Installation Guide
This electric scooter replacement circuit board is designed for direct installation and is easy to install and disassemble. You can install it smoothly in minutes. Important: This dashboard is only compatible with LEZOD controllers. Controllers from other brands may not be compatible.
4.1. Preparation
- Ensure your scooter is powered off and disconnected from any power source.
- Gather necessary tools (e.g., screwdriver, pry tools) if required to access the existing dashboard.
4.2. Removal of Old Dashboard (if applicable)
- Carefully remove the existing dashboard from your scooter.
- Disconnect all wiring harnesses from the old dashboard. Note the orientation and connection points for reassembly.
4.3. Installing the New Dashboard
- Connect the main wiring harness from your scooter to the corresponding port on the new LENZOD Dashboard Display PCB. This is typically a multi-pin connector.
- Connect the smaller 2-pin power cable (red and black wires) to its designated port on the PCB.
- Ensure all connections are secure and properly seated. Refer to the images below for visual guidance on the connectors.
- Carefully place the new dashboard into its housing on the scooter.
- Secure the dashboard using any screws or clips that were removed during disassembly.
Image: Direct installation process of the dashboard.
Image: Overview of the dashboard PCB and its connectors.
Image: Close-up of the multi-pin signal connector.
Image: Close-up of the 2-pin power connector.
5. Operating Instructions
The electric scooter dashboard panel provides a cool and clear data display, making power and speed clearly visible on the screen. After installation, power on your scooter to activate the display.
5.1. Display Indicators
The dashboard features several indicators to keep you informed about your scooter's status:
- Speedometer: Displays current speed in km/h or mph.
- Mode Display: Shows the current riding mode (e.g., Eco, D, S).
- High Temperature Tips: Alerts you if the scooter's temperature exceeds safe limits.
- Power Level Display: Indicates the remaining battery charge.
- Power Switch: Button to turn the scooter on/off and cycle through modes.
- Fault Display: Shows error codes or warnings if a malfunction occurs.
Image: Clear Data Display with labeled indicators.
5.2. Basic Operation
- Power On/Off: Press and hold the power button to turn the scooter on or off.
- Change Riding Mode: Short press the power button to cycle through available riding modes (Eco, D, S).
- Headlight Control: The display may also show an indicator for the headlight. Consult your scooter's main manual for headlight operation.
6. Maintenance
To ensure the longevity and optimal performance of your LENZOD Dashboard Display PCB, follow these maintenance guidelines:
- Cleaning: Wipe the display screen and surrounding areas with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the screen or electronic components.
- Waterproof Feature: The dashboard has a great waterproof effect, allowing for confident and safe riding even in rainy conditions. However, avoid submerging the scooter or directly spraying high-pressure water onto the display.
- Inspection: Periodically check the wiring connections to ensure they are secure and free from corrosion or damage.
Image: Waterproof feature of the dashboard display.
7. Troubleshooting
If you encounter issues with your dashboard display, refer to the following common problems and solutions:
- Display Not Turning On:
- Check all wiring connections to ensure they are firmly seated.
- Verify that the scooter's main power is on and the battery has sufficient charge.
- Ensure compatibility with your scooter's controller (only compatible with LEZOD controllers).
- Incorrect Speed/Data Display:
- Ensure all connections are secure. Loose connections can lead to intermittent or incorrect readings.
- Restart the scooter to reset the display.
- Fault Indicator On:
- Refer to your scooter's main user manual for specific fault codes and their meanings.
- If the fault persists, consult a qualified technician.
- Intermittent Display:
- Check for any loose wires or damaged connectors.
- Ensure the dashboard is securely mounted and not experiencing excessive vibration.
8. User Tips
- Always double-check wiring connections during installation to prevent issues.
- Keep the display clean for optimal visibility of information.
- If you are unsure about any installation steps, it is recommended to seek professional assistance.
9. Frequently Asked Questions (FAQ)
- Q: Is this dashboard compatible with all Xiaomi M365/Pro scooters?
- A: This dashboard is specifically designed for OEM Xiaomi M365/Pro electric scooters and is only compatible with LEZOD controllers. Compatibility with other brand controllers is not guaranteed.
- Q: Is the installation difficult?
- A: The installation is designed to be straightforward for direct replacement. However, basic technical knowledge and careful handling of electronic components are recommended. If you are uncomfortable, please consult a professional.
10. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Ensure you retain your proof of purchase for any warranty services.
