1. Introduction
The TENMARS TM-204 is a portable digital lux meter designed for accurate measurement of illumination intensity. It provides readings in both Lux and Foot-candle units, making it versatile for various lighting assessment needs. This device features a clear 3 1/2 digit LCD display, includes indicators for overload and low battery conditions, and adheres to stringent industry standards such as JISC1609:1993 and CNS 5119 general A class specifications. Its spectral response is closely matched to the CIE luminous spectral efficiency, ensuring reliable measurements across the entire visible light spectrum. The TM-204 is an essential tool for professionals and enthusiasts alike, suitable for a wide range of applications where precise light measurement is critical.
2. Features
- 3 1/2 digits LCD with a maximum reading of 2000.
- Overload indication for readings exceeding the range.
- Low battery indication to alert users for battery replacement.
- Compliant with JISC1609:1993 and CNS 5119 general A class specifications.
- Spectral response closely matches CIE luminous spectral efficiency.
- Measures illumination intensities in units of Lux or Foot-candle.
- Capable of measuring light sources across the entire visible range.
- Cosine angular corrected for accurate readings regardless of light angle.
- Data Hold function to freeze the current reading on the display.
- Max Hold function to capture the maximum measured value.
- Zero adjustment capability for calibration.
3. Applications
The TENMARS TM-204 Digital Lux Meter is suitable for a broad spectrum of applications, including but not limited to:
- Warehouses and factories for ensuring adequate lighting levels.
- Office buildings and restaurants for comfort and productivity.
- Schools and libraries for optimal study environments.
- Hospitals for patient care areas and examination rooms.
- Photographic and video production settings for lighting control.
- Parking garages for safety and visibility.
- Museums and art galleries for display lighting assessment.
- Stadiums and other large venues for event lighting.
- Building security and general environmental light monitoring.
4. Package Contents
Upon opening the package, please verify that all items listed below are present and in good condition:
- TENMARS TM-204 Digital Lux Meter
- User's Manual
- Certificate of Calibration
- Carrying Case
Note: Batteries are not included in the package. A 9V NEDA 1604 / IEC 6F22 JIS 006P battery is required for operation.

Image: TM-204 Lux Meter, user manual, and calibration certificate.
Video: Unboxing and basic operation of the TM-204 Lux Meter.
5. Setup
5.1 Battery Installation
- Locate the battery compartment cover on the back of the meter.
- Slide the cover downwards or open the latch as indicated by the 'OPEN' marking.
- Insert a new 9V NEDA 1604 / IEC 6F22 JIS 006P battery, ensuring correct polarity (+ and - terminals).
- Close the battery compartment cover securely.

Image: Rear view of the TM-204 Lux Meter with the battery compartment open, illustrating battery type and installation.
6. Operation
6.1 Power On/Off
Press the green power button (labeled with a circle and a vertical line) to turn the meter ON or OFF.
6.2 Taking a Measurement
- Ensure the meter is powered on.
- Remove the protective cap from the light sensor.
- Point the light sensor directly towards the light source you wish to measure.
- The illumination intensity will be displayed on the LCD screen.

Image: Front view of the TM-204 Lux Meter displaying a measurement.
6.3 Unit Selection (Lux/Foot-candle)
Press the 'Lx/Fc' button to toggle between Lux and Foot-candle measurement units.
6.4 Data Hold (D-H)
Press the 'D-H' button to freeze the current reading on the display. Press it again to release the hold function and resume live measurements.
6.5 Max Hold (M-H)
Press the 'M-H' button to capture and display the maximum illumination value measured since the function was activated. Press it again to exit Max Hold mode.
6.6 Zero Adjustment
The TM-204 features a zero adjustment screw (labeled '0 ADJ') on the side. In a completely dark environment (with the sensor cap on), use a small screwdriver to adjust this screw until the display reads '000' or as close to zero as possible. This ensures accurate baseline measurements.

Image: Side view of the TM-204 Lux Meter highlighting the '0 ADJ' screw for calibration.
7. Specifications
7.1 Model Feature Comparison
| Feature | TM-203 | TM-204 | TM-205 |
|---|---|---|---|
| Data hold | V | V | V |
| Max/Min/AVG hold | V | ||
| Max hold | V | ||
| Zero adjustment | V | V | V |
| Auto ranging | V | V | |
| Auto power off | V | V | |
| Datalogger | V |
Image: Feature comparison table for TM-203, TM-204, and TM-205 models.
7.2 Measurement Specifications
| Parameter | Details | |
|---|---|---|
| Sensor | Silicon photodiode and filter | |
| Measuring range | 200, 2000, 20000, 200000 Lux 20, 200, 2000, 20000 Foot-candle | |
| Accuracy | +/- 3% (Calibrated to standard incandescent lamp 2856º K) +/- 8% (other visible light source TM-204) +/- 6% (other visible light source TM-203/205) | |
| Angle deviation from cosine characteristics | 30º | +/- 2% |
| 60º | +/- 6% | |
| 80º | +/- 25% | |
Image: Detailed measurement specifications including sensor type, range, accuracy, and angle deviation.
7.3 Physical Dimensions
| Parameter | Value |
|---|---|
| Meter size (LxWxH) | 172 x 55 x 38 mm |
| Weight (including battery) | 250g |
Image: Table showing the physical dimensions and weight of the meter.
8. Maintenance
- Cleaning: Wipe the meter's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Keep the light sensor clean and free from dust or smudges, as this can affect measurement accuracy.
- Storage: When not in use for extended periods, remove the battery to prevent leakage. Store the meter in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Sensor Protection: Always keep the protective cap on the light sensor when the meter is not in use to prevent damage and dust accumulation.
- Battery Replacement: Replace the 9V battery promptly when the low battery indicator appears on the display to ensure continuous accurate operation.
9. Troubleshooting
- Meter does not power on: Check if the battery is installed correctly with the right polarity. Ensure the battery has sufficient charge; replace if necessary.
- Inaccurate readings:
- Ensure the light sensor is clean and free from obstructions.
- Perform a zero adjustment in a dark environment.
- Verify that the meter is pointed directly at the light source.
- Check for low battery indication and replace the battery if needed.
- Display shows 'OL' (Overload): The measured light intensity exceeds the meter's current range. If the meter has manual range selection (not applicable for TM-204 as it's not explicitly stated to have it), switch to a higher range. For the TM-204, this indicates the light is too intense for the device's maximum range.
- Display shows 'LO' (Low Battery): Replace the 9V battery immediately.
10. User Tips
- For the most accurate readings, ensure the light sensor is positioned at the exact point where illumination is to be measured and is oriented perpendicular to the light source.
- When comparing light levels in different areas, try to use the same measurement unit (Lux or Foot-candle) consistently.
- Regularly perform the zero adjustment to maintain the meter's calibration and accuracy.
11. Warranty and Support
The TENMARS TM-204 Digital Lux Meter is manufactured under strict quality control standards. For specific warranty details and technical support, please refer to the warranty card included with your product or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.